Definitive Contract 80NSSC19C0613
Award Date
8/26/19
Potential Completion Date
3/15/22
Potential Value
$754K
Federal Agency
Shared Services Center
Awardee
Elementum 3D, Inc.
Ultimate Awardee
Not listed
NAICS Category
541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC Category
AR11 - Space R&D Services; Space Flight, Research And Supporting Activities; Basic Research
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Full and Open Competition after exclusion of sources
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Erie, CO 80516, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
500
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
SBIR Program Phase III Action
Primary Consortia Member
Not listed
Similar Awards
NASA has awarded a firm-fixed-price purchase order to Elementum 3D, Inc., a small business contractor, for the delivery of approximately 750 pounds of NASA Alloy GRX-810 powder. The powder will be used in Laser Powder Bed Fusion (L-PBF) and Directed Energy Deposition (DED) additive manufacturing processes at the Glenn Research Center in Cleveland, Ohio under the Transformational Tools and Technologies project. The contract has a ceiling value of $114,625.00 and a period of performance ending...
This is a $82,100.00 firm-fixed-price purchase order awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Elementum 3D, Inc. for the delivery of approximately 500 pounds of NASA Alloy GRX-810 Powder. The powder must meet precise chemical composition requirements and be pre-approved on NASA's IP list. This is a sole source procurement, as Elementum 3D is the only commercially available source with the required material used in an ongoing NASA/Air Force...
This is a $1,999,769.00 firm-fixed-price definitive contract awarded by the Office of Naval Research (ONR) to Elementum 3D, Inc. under the Small Business Innovation Research (SBIR) Program Phase II. The contract is for the delivery of progress reports and other materials related to advanced additive manufacturing research and development, specifically focused on the development of specialized metal-based materials for applications in areas such as missile components, rocket motor cases, and...
This is a $75,000.00 firm fixed-price purchase order awarded by the National Aeronautics and Space Administration Shared Services Center (NASA/NSSC) to Elementum 3D, Inc., a small business manufacturer located in Erie, Colorado. The contract is for the delivery of 600 kilograms of IN625 RAM2 additive manufacturing powder, which will be used at the NASA Marshall Space Flight Center. This procurement was issued as a sole source contract under Federal Acquisition Regulation (FAR) 13.106-1(b)(1)(i),...
This federal contract award to Elementum 3D, Inc., a small business manufacturer in Erie, Colorado, is for the provision of 1,000 pounds of coated metal powder. The $24,460.90 firm fixed-price purchase order was awarded on March 28, 2025 by the Shared Services Center, a civilian federal agency, with a completion date of May 23, 2025. The contract does not have a set-aside designation. Elementum 3D, Inc. specializes in advanced 3D printing materials and additive manufacturing technologies, and...
This is a definitive contract awarded to Elementum 3D, Inc., a for-profit manufacturer of advanced manufacturing powders and materials for 3D printing, by the Department of the Army Materiel Command Research Development and Engineering Command. The contract is for a Small Business Technology Transfer (STTR) Phase II research and development effort, with a firm fixed price of $999,983.18 and a completion date of November 20, 2021. As a small business, Elementum 3D has received several set-aside...
This is a $149,995.20 firm fixed price purchase order awarded by the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground to the small business prime contractor Elementum 3D, Inc. The contract is for Phase I research and development under the Small Business Technology Transfer (STTR) program. Elementum 3D provides research, development, production, and qualification services related to metal additive manufacturing technologies, primarily for Department of...
This is a $74,994 firm-fixed-price purchase order awarded by the Air Force Research Laboratory (AFRL) to Elementum 3D, Inc., a small business manufacturer of advanced 3D printing materials and additive manufacturing technologies. The contract is for the PERMEATE (Permeability Enabled by Rapid Manufacturing for Enhanced Aerospace Technology Effectiveness) project, which is a Small Business Innovation Research (SBIR) Phase I action. The contract has a total small business set-aside designation and...
This is a firm-fixed-price purchase order contract awarded by the Naval Air Warfare Center (NAVAIR) to Elementum 3D, Inc., a for-profit manufacturer of advanced 3D printing materials. The contract is for $178,227.96 to provide four rocket motor cases, with a completion date of December 2, 2024. The original solicitation was a sole-source pre-solicitation for the rocket motor cases, as Elementum 3D was identified as the only vendor capable of producing the required composite system. The...
The Department of the Army Materiel Command Contracting Command Detroit Arsenal has awarded a Small Business Innovation Research (STTR) Phase I contract to Elementum 3D, Inc., a for-profit manufacturer of advanced 3D printing materials. The firm-fixed-price definitive contract, valued at $172,785.48, is for research and development related to expanding the availability of groundbreaking additive manufacturing (AM) metal-based materials. As a total small business set-aside, this contract builds...