Purchase Order 47QSWA24P02VX
Award Date
10/30/23
Potential Completion Date
12/14/23
Potential Value
$21
Federal Agency
Federal Acquisition Service
Awardee
F & M Micro Products Inc.
Ultimate Awardee
Not listed
NAICS Category
334111 - Electronic Computer Manufacturing
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Lake Balboa, CA 91406, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $20,950 to supply staples designed for use in a hammer-type office tacker. The staples will measure approximately 0.370 inches between legs, 0.415 inches outside legs, and 0.375 inches in length, and will be preformed, straight steel staples cemented together in strip form. Performance will take place at F&M Micro Products' facility in Lake Balboa, California, with deliveries...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $167,600. The firm fixed price order is for the delivery of staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside leg dimensions, .415 inches outside leg dimensions, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $4,190. The firm fixed price order is for the delivery of staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside leg dimensions, .415 inches outside leg dimensions, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake Balboa,...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $20,950 to supply staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside, .415 inches outside, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake Balboa, California under firm fixed pricing from September 27, 2023 through...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $41,900. The firm fixed price order is for the delivery of staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside the legs, .415 inches outside the legs, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake Balboa, California...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $4,190. The firm fixed price order is for the delivery of staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside the legs, .415 inches outside the legs, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake Balboa, California,...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $4,190. The firm fixed price order is for the delivery of staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside the legs, .415 inches outside the legs, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake Balboa, California...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $4,190. The firm fixed price order is for the delivery of staples designed for use in a hammer-type tacker. The staples measure approximately .370 inches inside the legs, .415 inches outside the legs, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. All work will be performed by F&M Micro Products in Lake Balboa, California...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $41,900. The firm fixed price order is for the delivery of staples designed for use in a hammer type tacker. The staples measure approximately .370 inches inside the legs, .415 inches outside the legs, and .375 inches in length, and are preformed, straight steel staples cemented together in strip form. Place of performance is F&M Micro Products' facility in Lake Balboa,...
The General Services Administration (GSA) awarded Purchase Order number HT050A to F&M Micro Products Inc. for $20,950 to supply staples designed for use in a hammer-type tacker. The contract has a firm fixed price and period of performance from August 25, 2023 through October 9, 2023. F&M Micro Products Inc. will deliver staples measuring approximately .370 inches inside leg dimensions, .415 inches outside leg dimensions, and .375 inches in length to the place of performance in Lake...