Purchase Order 47QSHA23P12PA
Award Date
7/14/23
Potential Completion Date
8/13/23
Potential Value
$3.3K
Federal Agency
Federal Acquisition Service
Awardee
Kipper Tool Company
Ultimate Awardee
Not listed
NAICS Category
332216 - Saw Blade and Handtool Manufacturing
PSC Category
5120 - Hand Tools, Nonedged, Nonpowered
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The General Services Administration (GSA) awarded Kipper Tool Company a $2,000 firm fixed price purchase order to provide portable pneumatic scalers. The scalers must have a 3mm needle diameter, weigh 8 pounds or less, extend up to 14 inches with a maximum 5/8 inch stroke and tolerances of 1/16 inch for stroke and 500 beats per minute for no load speed. The scalers will operate between 85 to 90 pounds per square inch of air pressure and 85% air consumption. Performance will take place in...
The General Services Administration (GSA) awarded Kipper Tool Company a $1,332 firm fixed price purchase order to provide portable pneumatic scalers. The scalers must have a 3mm needle diameter, weigh 8 pounds or less, extend up to 14 inches with a maximum 5/8 inch stroke and tolerances of 1/16 inch for stroke and 500 beats per minute for no load speed. Performance will take place in Gainesville, Georgia from August 5th to September 4th, 2023. This total small business set-aside contract...
The General Services Administration (GSA) awarded Kipper Tool Company a $3,995.94 firm fixed price purchase order to provide portable pneumatic scalers. The contract has a period of performance from July 13, 2023 through August 12, 2023 for the delivery of needle scalers to be used at locations in Gainesville, Georgia. The scalers must have a 3mm needle diameter, weigh approximately 8 pounds, extend up to 14 inches with a maximum 5/8 inch stroke and tolerate deviations of no more than 1/16th...
The General Services Administration (GSA) Federal Acquisition Service awarded a $665,000 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The contract calls for the delivery of portable, pneumatic scalers with a needle diameter of 3mm, weight of 8 pounds, maximum length of 14 inches, maximum stroke of 5/8 inches, and stroke tolerance of 1/16 inches. Additional requirements include a no load speed of 4,000 beats per minute with a tolerance of 500, and operating...
The General Services Administration (GSA) Federal Acquisition Service awarded a $665.99 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The contract calls for the delivery of a portable, pneumatic needle scaler with a 3mm needle diameter, 8-pound weight, maximum length of 14 inches, 5/8-inch maximum stroke, and 1/16-inch stroke tolerance. The needle scaler must operate at 4000 beats per minute with a 500 bpm tolerance and require air pressure between 85 to 90 psi....
Kipper Tool Company has been awarded a firm fixed price purchase order valued at three thousand eight hundred nineteen dollars and fifty-five cents ($3,819.55) to provide pneumatic scalers to the General Services Administration (GSA) Federal Acquisition Service. Performance will occur in Gainesville, Georgia through October 18, 2023. The scalers are to be three piston bore style, with a 0.88 inch stroke, capable of 5,200 blows per minute at 90 pounds per square inch minimum pressure, and a...
The General Services Administration (GSA) awarded Kaufman Company, Inc. a $3,328 purchase order to provide portable pneumatic scalers. The scalers must have a needle diameter of 3mm, weigh up to 8 lbs, extend up to 14 inches, and stroke up to 5/8 inches within a tolerance of 1/16 inches. Additional requirements include an operating air pressure of 85-90 psi and speeds of 4,000 blows per minute within a tolerance of 500 bpm. Performance will take place in Norwood, Massachusetts over a period of...
Kipper Tool Company has been awarded a purchase order contract valued at six hundred sixty-four dollars by the U.S. General Services Administration (GSA) Federal Acquisition Service to deliver a portable, pneumatic needle scaler. The contract is set aside for total small businesses. Performance will occur in Gainesville, Georgia through June 2024. The needle scaler must have a 3mm diameter needle, weigh eight pounds or less, extend up to fourteen inches, and stroke within 0.0625 inches of 5/8...
Kipper Tool Company has been awarded a firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide pneumatic scalers to support GSA operations. Under the terms of the award, Kipper Tool will deliver its 7.7-inch pneumatic scalers with 0.5-inch stroke length and 7,000 blows per minute maximum operating capacity to GSA locations in Gainesville, Georgia by August 7, 2023. With a total small business set aside designation, the contract aims...
The General Services Administration (GSA) Federal Acquisition Service awarded a $2,663.96 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The contract is for the delivery of a portable, pneumatic scalpel with a 3mm needle diameter, 8-pound weight, 14-inch maximum length, 5/8-inch maximum stroke, and 1/16-inch stroke tolerance. The scalpel must operate at 4000 beats per minute with a 500 beat per minute tolerance, using air pressure between 85 to 90 pounds per...