Purchase Order 47QSHA23P1AGB
Award Date 9/18/23
Potential Completion Date 10/18/23
Potential Value $3.8K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Gainesville, GA 30504, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
2
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $764.69 by the General Services Administration (GSA) Federal Acquisition Service to provide pneumatic scalers to the agency. Under the terms of the contract, Kipper Tool Company will deliver scalers described as pneumatic style, with three piston bore of 0.88 inches, 0.81 inch stroke, capable of 5,200 blows per minute at 90 pounds per square inch minimum pressure and with a minimum length of 13.3 inches and...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at approximately $1,529 by the General Services Administration (GSA) Federal Acquisition Service to provide pneumatic scalers. To be performed in Gainesville, Georgia from September through October 2023, the contract calls for the delivery of three-piston bore pneumatic scalers with specified blow rates, stroke, inlet size, and minimum length to support GSA programs. Designated as a total small business set-aside, this...
- Kipper Tool Company has been awarded a firm fixed-price purchase order valued at $764.69 by the General Services Administration (GSA) Federal Acquisition Service to provide pneumatic scalers to the agency. Under the terms of the contract, Kipper Tool Company will deliver SCALER, PNEUMATIC STYLE- THREE PISTON BORE - 0.88''STROKE - 0.81''BLOWSPER MIN 5200 BPM AT 90PSIG MIN LENGTH 13.3 INCHMAX AIR INLET 3/8 INCH NPT to the place of performance in Gainesville, Georgia by August 12, 2023. The...
- Kipper Tool Company has been awarded a firm fixed price purchase order valued at approximately $3,820 by the General Services Administration (GSA) Federal Acquisition Service to provide pneumatic scalers. The contract has a period of performance from September 16 to October 16, 2023 and will be performed in Gainesville, Georgia. Specifically, Kipper Tool Company will deliver a pneumatic scaler that is three piston bore, 0.88 inch stroke, capable of 5,200 blows per minute at 90 pounds per...
- The General Services Administration (GSA) awarded Kipper Tool Company a $3,330 firm fixed price purchase order to provide portable pneumatic scalers. The scalers must have a 3mm needle diameter, weigh 8 pounds or less, extend up to 14 inches with a 5/8 inch maximum stroke and tolerances of 1/16 inch for stroke and 500 beats per minute for no load speed. The scalers will operate between 85 to 90 pounds per square inch of air pressure and 85% air consumption. Performance will take place in...
- Kipper Tool Company has been awarded a firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide pneumatic scalers to support GSA operations. Under the terms of the award, Kipper Tool will deliver its 7.7-inch pneumatic scalers with 0.5-inch stroke length and 7,000 blows per minute maximum operating capacity to GSA locations in Gainesville, Georgia by August 7, 2023. With a total small business set aside designation, the contract aims...
- The General Services Administration (GSA) awarded Kipper Tool Company a $1,332 firm fixed price purchase order to provide portable pneumatic scalers. The scalers must have a 3mm needle diameter, weigh 8 pounds or less, extend up to 14 inches with a maximum 5/8 inch stroke and tolerances of 1/16 inch for stroke and 500 beats per minute for no load speed. Performance will take place in Gainesville, Georgia from August 5th to September 4th, 2023. This total small business set-aside contract...
- The General Services Administration (GSA) Federal Acquisition Service awarded a $665,000 firm fixed price purchase order to Kipper Tool Company of Gainesville, Georgia. The contract calls for the delivery of portable, pneumatic scalers with a needle diameter of 3mm, weight of 8 pounds, maximum length of 14 inches, maximum stroke of 5/8 inches, and stroke tolerance of 1/16 inches. Additional requirements include a no load speed of 4,000 beats per minute with a tolerance of 500, and operating...
- The General Services Administration (GSA) awarded Kipper Tool Company a $2,662 purchase order to provide portable, pneumatic scalers to the agency. Under the firm fixed price contract running from November 2nd to December 2nd, 2023, Kipper Tool will deliver needle scalers with a 3mm diameter and 8-pound weight capable of operating at speeds up to 4,000 beats per minute and stroking 5/8 inches within a 1/16 inch tolerance. The scalers will utilize air pressures between 85 to 90 psi and be...
- Kipper Tool Company has been awarded a $4,170.76 firm fixed price purchase order by the U.S. General Services Administration's (GSA) Federal Acquisition Service to provide SCALER, NEEDLE, PNEUMATIC items as detailed in an attached document. Performance will take place in Gainesville, Georgia over a one-month period concluding on August 26, 2023. The award is set aside for total small businesses. No major subcontractors or additional context were provided regarding GSA programs. Kipper Tool...