Delivery Order N0010401G7004-5189
Award Date 7/18/03
Potential Completion Date Not listed
Potential Value Not listed
Funding Federal Agency
Contracting Federal Agency
Ultimate Awardee
Not listed NAICS Category
PSC Category
Set-Aside Type
Total Small Business
Federal Contract Vehicle
- Not listed
Extent Competed
Full and Open Competition after exclusion of sources
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Pennsylvania, USA
Solicitation Procedures
Not listed
Number Of Offers Received
3
Legislative Mandate
Walsh Healy Act
National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- This federal contract award with ID N0010413PEK02 was issued by the Naval Supply Systems Command (NAVSUP), a defense agency, to New Stanton Machining And Tooling, a small business manufacturer, for the delivery of HPS LOWER PIVOT RH. The $5,440.00 firm fixed-price purchase order has a completion date of September 19, 2013 and was not set aside for any specific business category. New Stanton Machining And Tooling has provided valve components and specialty tools to NAVSUP in the past through...
- The Department of the Navy Naval Supply Systems Command awarded a $26,320 firm fixed price blanket purchase agreement call contract to Corestar International Corporation New Stanton Machining And Tooling Division for very restricted electronic parts. The place of performance is Irwin, Pennsylvania and the period of performance is from May 13, 2022 through November 9, 2022. This partial small business set-aside contract supports the Navy's supply chain management and logistics programs. As a...
- Corestar International Corporation, operating as New Stanton Machining and Tooling, has been awarded a firm fixed-price blanket purchase agreement call by the Department of the Navy Naval Supply Systems Command. This $6,872 small business set-aside contract calls on an existing BPA to provide standardized parts, tools, and hardware in support of Navy fleet logistics and maintenance programs. Performance will occur at the awardee's facility in Irwin, Pennsylvania. As a prime contractor...
- Corestar International Corporation, operating as New Stanton Machining and Tooling, has been awarded a firm fixed-price blanket purchase agreement call by the Department of the Navy Naval Supply Systems Command. This $9,538 contract is set aside for total small businesses and will provide nuts, bolts, screws, washers, valves, fittings, specialty tools, and other hardware in support of Navy fleet maintenance and logistics programs. Performance will occur at New Stanton Machining and Tooling's...
- This is a $3,130 firm fixed-price purchase order contract awarded by the Naval Supply Systems Command (NAVSUP) to New Stanton Machining And Tooling, a small business manufacturer. The contract is for the delivery of valves, valve components, and specialty tools for the U.S. Navy. The contract has a completion date of July 31, 2013 and was set aside for total small business participation. Based on the description, New Stanton Machining And Tooling has provided similar valve parts and tools to...
- The Department of the Navy Naval Supply Systems Command awarded a $5,970 firm fixed price blanket purchase agreement call contract to Corestar International Corporation, operating as New Stanton Machining And Tooling, for FME BARR AY,ANG VL. As a total small business set-aside, this contract supports the Navy's supply chain needs through the delivery of machined parts and tools from New Stanton Machining And Tooling's facility in Irwin, Pennsylvania. The one year contract is scheduled for...
- This firm fixed price blanket purchase agreement (BPA) call contract was awarded by the Department of the Navy Naval Supply Systems Command to Corestar International Corporation, operating as New Stanton Machining And Tooling, for the total small business set-aside amount of $5,123. The contract is for the delivery of cup, suction products to the agency's location in Irwin, Pennsylvania, with a period of performance through May 13, 2024. As a division of Corestar International Corporation, New...
- This is a firm-fixed-price delivery order contract awarded by the Naval Supply Systems Command (NAVSUP) to New Stanton Machining And Tooling, a small business manufacturer. The $11,011 contract is for the delivery of various valve parts and specialty tools, including flanges, glands, valve guides, valve stem adapters, valve disk retainers, valve stems, rotary valve bushings, and other components. The contract has a completion date of March 8, 2012 and was awarded on November 29, 2011. This...
- The Department of the Navy Naval Supply Systems Command awarded a $4,071 purchase order to Corestar International Corporation New Stanton Machining And Tooling Division for STEM LOCK products and services. As a total small business set-aside, this firm fixed price contract supports the Navy's procurement needs through February 2024. New Stanton Machining And Tooling, operating as a division of Corestar International Corporation, will deliver the STEM LOCK items from its facility in Irwin,...
- <p>This is a federal contract award issued by the Naval Supply Systems Command (NAVSUP), a defense agency, to New Stanton Machining And Tooling, a small business manufacturer. The award, valued at $10,534.00, is for the supply of NUT,SLOTTED items. The contract has a firm fixed-price, purchase order structure and an ultimate completion date of October 7, 2013. The award was set aside for total small business participation.</p>