Definitive Contract W15QKN18C0106
Award Date 9/25/18
Potential Completion Date 12/24/18
Potential Value $264K
Funding Federal Agency
Contracting Federal Agency
Ultimate Awardee
Not listed Set-Aside Type
No Set-Aside Used
Federal Contract Vehicle
- Not listed
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Palo Alto, CA 94301, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- This federal contract, awarded by the Department of the Army Acquisition Support Center PEO Ammunition to Nano Dimension USA Inc., doing business as Nano Dimension 3D, is for the delivery, installation, training, and preventative maintenance of a Dragonfly Pro LDM upgrade additive manufacturing equipment. The contract has a firm fixed price of $101,300.00 and was awarded on August 11, 2020 with a completion date of December 31, 2021. The contract was awarded on a non-set-aside basis, with Nano...
- The Department of the Navy Naval Supply Systems Command Engineering Logistics Office awarded a $260,038 purchase order to Nano Dimension USA Inc., doing business as Nano Dimension 3D, located in Waltham, Massachusetts. The contract calls for delivery of a Dragonfly IV 3D printer system including an upgraded existing printer, flight control software licenses, ink supplies, training, and maintenance support. The solicitation sought a Dragonfly IV AME printer, fourteen ink cartridges, training, and...
- This firm fixed-price purchase order from the Warner Robins Air Logistics Complex, part of the U.S. Department of Defense, awards $342,278 to Nano Dimension USA Inc. (doing business as Nano Dimension 3D) for the DRAGONFLY 2020 PRO PRINTER LIGHTS OUT DIGITAL MANUFACTURING (LDM) HARDWARE UPGRADE system. The contract does not utilize a small business set-aside. Nano Dimension, a foreign-owned for-profit manufacturer, has a history of federal contract awards with various DoD agencies for the...
- The Office of the Secretary of Defense awarded Nano Dimension USA Inc. a $569,150 firm fixed price contract to deliver one 3D electronics printing system to the Air Force Materiel Command Research Laboratory in Waltham, Massachusetts. The solicitation sought a self-contained, turnkey additive electronics printing system capable of creating 3D printed circuit boards and integrated multi-material printing, with a minimum resolution of 100 micron line spacing and 75 micron line widths, to support...
- The Defense Advanced Research Projects Agency (DARPA) awarded a $274,070 firm fixed-price purchase order to Nano Dimension USA Inc. for annual maintenance services on a 3D Electronics Printer system. The contract, which commenced on September 9, 2025, extends through June 6, 2030, and covers remote support, replacement print heads, preventative maintenance kits, and software updates for the vendor's DragonFly 3D printer platform. The work will be performed at the contractor's facility in...
- The U.S. Navy NAVSUP Engineering Logistics Office awarded a $279,036.10 firm fixed-price purchase order to Nano Dimension USA Inc. (doing business as Nano Dimension 3D) on September 1, 2024, for comprehensive hardware maintenance and support services on the Nano Dimension Dragonfly 3D Printer system. The contract, designated NND-CCS-WA-0003, will be performed at Naval Surface Warfare Center Dahlgren Division in Dahlgren, Virginia, with an ultimate completion date of August 31, 2029. This is...
- The Department of the Navy Strategic Systems Programs awarded a firm fixed-price purchase order contract valued at $132,640.40 to Nano Dimension USA Inc., doing business as Nano Dimension 3D, for a Dragonfly IV Printer upgrade. This sole-source award was made without a set-aside designation in response to a requirement to replace a damaged and inoperable Dragonfly printer. Nano Dimension, a foreign-owned for-profit manufacturer, provides 3D electronics printing systems, ink, training,...
- The Department of the Army Acquisition Support Center PEO Ammunition awarded a $139,350.00 firm fixed price purchase order to NCC Nano, LLC (doing business as Novacentrix), a for-profit limited liability company and manufacturer of goods, for the procurement of upgrades to an existing Novacentrix PulseForge 1200 roll-to-roll system, including delivery, installation and training at Picatinny Arsenal in New Jersey. This award was not set aside for any socioeconomic program. The original contract...
- The U.S. Army Materiel Command's Army Contracting Command at Aberdeen Proving Ground awarded a $28,229.55 firm fixed-price purchase order to Strategic Communications LLC, a woman-owned small business based in Louisville, Kentucky, for the procurement of one selective laser sintering (SLS) 30W 3D printer machine. The award, issued on September 11, 2025, under solicitation W911QX-25-Q-0109, includes technical specifications requiring a minimum build volume of 160x160x300mm with capability to...
- The U.S. Department of the Army Materiel Command Research Development and Engineering Command has awarded a $875,250.00 firm-fixed-price purchase order to 3D Systems, Inc., a for-profit manufacturer of 3D printing equipment, materials, and related software and services. The contract is for the procurement of a PROX DMP 320 3D printing system manufactured by 3D Systems, with no labor hours included. The contract is not set aside for any small business program. 3D Systems has a history of...