Mobile Decontamination Trailers
Added: Mar 19, 2018 3:16 pm This is a combined Synopsis / Solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested and a written solicitation will not be issued.The solicitation number is N6470918R0005; this solicitation is a request for quotation (RFQ). This notice is Unrestricted. The North American Industry Classification System (NAICS) code is 336214. The Federal Supply Class (FSC) is 4240.Strategic Weapons Facility, Atlantic (SWFLANT), Naval Submarine Base Kings Bay, Georgia, has a requirement for two (2) Mobile Decontamination Trailers. Specifications:Each Mobile Decontamination Trailer to be Department of Transportation (DOT) approved, approximately 8.5' x 26'-30' tandem or tripleaxle enclosed aluminum trailer to function as a mobile decontamination unit. Each trailer will be of a towable weight when the water tank and waste water tank is full and an additional 1500lbs of essential gear is loaded. Each trailer will have electric brakes with a standard 7-pin hookup. The trailers will contain a clean room (front of the trailer), dirty room (back of the trailer), and a shower room with two showers (between the clean and dirty room). The dirty room will be approximately 50% larger than the clean room in size. Both showers will be designed for one person at a time. Each trailer will have a door located in the rear of the trailer (dirty room) which will serve as a personnel entrance, a door located in the front of the trailer (clean room) which will serve as a personnel exit, and the storage room will have an exterior entrance. Each trailer will be designed to flow personnel from the back of the trailer, into the dirty room, tu the shower room, and finally ending up in the clean room and subsequently exiting the trailer. All items installed in/on the trailers will be in accordance with applicable specifications listed below. Additionally, the viability and quality of materials used will be a factor during selection, as will the general layout, design, and use of space.NOTE: SWFLANT will inspect each trailer during the construction/build process and prior to final delivery in order to ensure all requirements are and delivered. EXTERIOR ITEMS AwningsFull retractable awnings, designed to protect from sun and rain, on the sides and back of the trailer.Constructed of a material that is light-weight, and has longevity.The retractable awning will be deployed by a switch, not manually.Flood LightsExterior LED flood lights which fully illuminate the entire area around the trailer both above and under the awnings.Driving LightsTrailer will be equipped with adequate tail lights, brake lights, and marker lights for its respective size and will be in accordance with all applicable DOT regulations. Side marker lights must be included.GeneratorSufficient capacity diesel power generator to run all onboard equipment simultaneously + 50%. Generator will have transfer switch and generator power cord. Trailer will also be equipped to accept a backup generator and/or shore power and include a 30' cord specifically designed for generator style plugs. Generator will be located in such a manner which allows for use of routine maintenance, repairs, and/or removal, such as a "slide out" feature.Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.Rated KW/output will be a factor.Door LightingStandard LED lights located overhead of all exterior entrance doors that fully illuminate all door areas.Outlets 110V GFCI outlets with protective weather covers (2 per side, 8 total). Install 110V on an independent breaker for use of portable heaters if necessary.Entrance/Exit DoorsOne (1) door located in the rear of the trailer (dirty room), which will serve as a personnel entrance, and one (1) door located in the front of the trailer (clean room), which will serve as an exit for personnel. Each door will be safely accessible consistent with the height of the trailer. The storage room will also have an exterior entrance. All exterior doors will have locks and share a common key. "RV" type steps plus a grab rail may be sufficient depending on the height of the trailer. Manual fold up style steps and handrails are preferred in lieu of automatic mechanisms. Lightweight materials will be used for this.Roof Mounted A/C with Heat StripSufficient roof mounted air conditioning (A/C) unit (s) with heat strip. Unit must be mounted on the "Clean Room" side of the trailer and CANNOT regenerate any air from the dirty room.Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.PipingFreeze protection on all piping exposed to weather elements. Include standard 110V plug in order to utilize while trailer is not in use.Level IndicatorsInstall visual level indicators/gauges on all four exterior sides of the trailer to ensure proper leveling.Tongue JackThe tongue jack shall be of an adequate capacity for the weight of the tongue. Prefer tongue jack which is electrically operated OR requires less force for operation in order to minimize ergonomic/repetitive injury concerns.Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.Tongue SpecsAble to be towed with a 1-ton truck, class IV/V Reese style hitch with a 2 5/16" ball.Lightweight materials, such as aluminum, will be used toughout the construction when possible to minimize tongue weight and final tow weight.INTERIOR (ENTIRE TRAILER) Smooth FlooringSmooth, non-carpeted, flooring will be toughout the interior of the trailer to facilitate ease of cleaning.LightingAdequate LED ceiling lighting toughout the trailer, including the showers, that will fully illuminate the interior.GFCI Outlets110V GFCI outlets. 6 per room in clean and dirty rooms (2 per wall) and 2 in storage room. Outlets will be on separate breakers to eliminate circuit overload.DehumidifierDehumidifier which will include an 110V standard plug in order to facilitate operation while the trailer is not in use.Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.INTERIOR (CLEAN ROOM) Bench SeatingTwo (2) fold down, aluminum benches, each measuring 6 feet in length.Wall of CabinetsUpper and lower cabinets with latches and locks. Lower cabinets will be a minimum of 28" depth with a countertop and upper cabinets will be 18" in depth. Overall, this setup will have 6 doors and 3 drawers. Cabinets will be made of a material which is easy to maintain and clean, and is lightweight, such as ABS plastic or aluminum.Fold-Down Table2' x 4' wall mounted fold-down table, construction of a lightweight material.Floor DrainFloor drain centrally located in the middle of the room. Water will drain to the greywater tank.INTERIOR (STORAGE ROOM) Fresh Water System/TankFreshwater system with pump and 400 gallon holding tank. Tank must be refillable via external 2 1/2 inch hose and standard garden hose fitting (trailer must be towable with full water tank). Tank can be placed under the trailer to assist with weight distribution. Water level indicator to be placed in Clean Room.Waste Water System/TankWastewater pump system with 400 gallon holding tank. Tank must be disposable using an external valve/garden hose adaptor (trailer must be towable with full waste water tank). Tank must have a pump included. Tank can be placed under trailer in order to assist with weight distribution. Water level indicator to be placed in Clean Room.Water HeaterTankless electric water heater, water flow 3-4 gallons per minute.Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.Space ManagementThe storage room must have enough space to store items such as stacked traffic cones (20), and other miscellaneous items in addition to the water tanks and any other utility items.Overhead CabinetsIf space allows, overhead cabinets will be placed in the storage room for additional stowage.INTERIOR (SHOWER ROOM) Shower StallsTwo shower stalls will be setup for "One-Person at a time" use and will contain sloped floor pans to facilitate draining; will have a 6 inch lip to prevent spillover into the main shower room. Include access doors for ease of maintenance on piping.Space Between ShowersThere should be a minimum of 36" passageway between showers.CurtainsAir lock curtains on each shower stall entrance (EXAMPLE: curtains that are held closed magnetically).INTERIOR (DIRTY ROOM) Negative Air System700 Cubic Feet per Minute (CFM) ceiling mounted negative air system. System must be High Efficiency Particulate Arrestance (HEPA) filtered (10 micron).Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.Bench SeatingOne fold down, aluminum bench measuring 6 feet in length.Wall Heater1500 Watt electric wall heater.Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.Drying OvenWill be intended for drying rather than cooking and will be approximately 20" (depth) x 35" (width).Manufacturer warranty will be considered for this requirement.Manufacturer reputation for quality and longevity will be a factor.Decibel output will be a factor.Floor DrainFloor drain centrally located in the middle of the room. Will drain to greywater tank.SinkLaundry-room style deep-sink will be located in the dirty room and will have a hot and cold water supply and will have an electric hands- free towel feeder.Wall of cabinetsMinimum 6' wide 24" deep cabinets with countertop, drawers, and 18" upper cabinets. Cabinets will be made of a material which is easy to maintain and clean.Inspection/Acceptance:SWFLANT will reserve the right to inspect the trailers during the construction/build process and prior to final delivery in order to ensure all requirements are met and delivered. The trailers will also have at least a 1-year craftsmanship warranty which will cover any defective issues resulting from the design and/or construction of the trailers.Delivery Address: SWFLANT, 1150 USS Los Angeles Road, SWSSW Bldg. 6003, Kings Bay, GA 31547. Delivery within 60 days after acceptance of contract. FOB point - Destination.The following provisions and/or clauses apply to this acquisition. Offerors must comply with all instructions contained in:FAR 52.212-1 ADDENDUM: Instructions to Offerors - Commercial ItemsSWFLANT requests a Firm-Fixed-Price (FFP) quote by 03 April 2018 at 12:00 PM (EST) to provide the supplies described in this notice. The Government may consider late quotes. Contractors responding to this request must furnish a quote as described below.Quotes shall contain the following:1. Drawing of the proposed trailers.2. Price quote: Provide a FFP quote for all required supplies and/or services. Any costs related to credit card fees (see paragraph 6 below), delivery costs, and handling costs, as applicable, shall be included.3. Travel Expenses. If travel is required in support of this requirement, the contractor shall include a detailed Basis of Estimate (BOE) that is priced in accordance with the Joint Federal Travel Regulations (JFTR). Each component of the proposed travel expense shall clearly identify the date(s), location(s), duration(s), quantity of personnel, and cost for the proposed travel.4. Specifications: Provide all specifications for the products to be provided and a statementregarding whether or not the quoter is an authorized reseller of the products identified in the RFQ, if applicable.5. Quote Cover Letter: Provide the name, title, telephone number, and e-mail address of theCompany/division point of contact that can contractually obligate your company. Also, identify those individuals authorized to negotiate with the Government. Lastly, provide the company name, street address, and Data Universal Numbers System (DUNS) number.6. Exceptions to the RFQ: Identify any exceptions taken with the RFQ content and the rationale for the exceptions to the RFQ, to include any terms or conditions applicable to payment by Government Commercial Purchase Card (GCPC), if GCPC is identified as the method of payment in the RFQ.NOTE: Exceptions to the RFQ may render the quote noncompliant and ineligible for award.7. Government Commercial Purchase Card (GCPC) as Method of Payment. If the RFQ identifies use of the GCPC as the method of payment, all offerors shall discretely identify and include any associated charges in their quote and shall utilize Wide Area Work Flow (WAWF) as the mandatory method of invoice submittal and receiving report in accordance with DFARS 232.7002 & 232.7003.The proposal must demonstrate an understanding of and ability to meet all of the requirements set forth in the Specifications referenced herein. Toughout the proposal, the Offeror shall provide sufficient detail to substantiate the validity of all statements. The Offeror shall demonstrate that the Proposal complies with the requirements, terms, and conditions of the solicitation. General statements that the Offeror can or will comply with the requirements, that standard procedures will be used, that well known techniques will be used, or parapasing the solicitation's requirements in whole or in part, will NOT constitute compliance. Failure to conform to any of the requirements of the solicitation may form the basis for rejection of the Proposal.Brochures are not desired; clarity, completeness, and conciseness are essential and the overall quality of the proposal will be evaluated in the context of being representative of the Offeror's services. An Offeror's proposal is presumed to represent the best efforts to respond to the solicitation.Since only the proposal submitted in response to this solicitation will be evaluated, Offerors should make certain that their Proposal is complete with regard to the information provided. Data previously submitted, or presumed to be known, e.g., previous projects performed for the Government, will not be considered in the evaluation unless that information is physically contained in the Proposal.Offerors are advised that the Government may selectively verify any information provided in the proposal. Offerors are cautioned that they are responsible to ensure that material that they desire to have evaluated for a particular section is contained in that specific section.Proposals shall be e-mailed directly to spk12contracts@swflant.navy.mil, the sole designated e-mail address and inbox for submission and receipt of quotes or proposals. No other electronic means of submission, used in whole or in combination with e-mail, is permitted. E-mail quotes or proposals shall be in either Adobe or Microsoft Office format. Offerors are advised that the Government may be unable to receive other types of electronic files (e.g., .zip files) or files in excess of 20 megabytes. Unless offeror proposes a shorter period, by submission of an offer, the offeror agrees that its offer, including any timely revisions thereto, shall remain valid until the Government makes award under this solicitation. The foregoing does not preclude an offeror from withdrawing its offer prior to award.FAR 52.212-2 ADDENDUM: Evaluation- Commercial ItemsThe Government shall issue a purchase order resulting from this RFQ to the responsible quoter whose quote, conforming to the RFQ, represents the following factors:1. Quality2. Warranty3. Past Performance4. PriceThe Government will use a comparative means of evaluating offers and select the Offeror whose aggregate proposal reflects the Best Value for the Government. Factors 1, 2, and 3, when combined are significantly more important than price. Therefore, the Government may award to a higher priced Offeror whose non-price factors reflect a superior level of technical expertise, experienced and highly qualified personnel, and positive past performance evaluations. The importance of price in the evaluation for award will increase as the degree of equality of non-price factors increases.Factor 1 - QualityThe Government will evaluate each Offeror's proposal to determine the quality of the items the Offeror has proposed given the requirements identified in the specifications. The Government will give significant weight to the Offeror's proposed means of meeting the requirements, and higher-quality materials and construction methods can lead to a more favorable evaluation as a whole.Factor 2 - WarrantyThe Government will evaluate each Offeror's proposal to determine the length and scope of the warranty offered, as well as the ease of the Government making such a warranty claim. Warranties that are accessible can lead to a more favorable evaluation as a whole.Factor 3 - Past PerformanceThe Government will use Past Performance submissions, including Attachment 1 and 2 and any PPPQs, to evaluate the ability of the Offeror to perform the proposed effort. Past Performance submissions will be used to determine the potential risk of non-performance, defective performance, and/or late performance by evaluating each Offeror's reported quality of work and relevant experience with the items being solicited. In evaluating past performance, the Government may contact some or all of the references provided by the Offeror and may contact other sources of information, including but not limited to: Federal, state, and local government agencies, and published media and electronic databases (i.e. Department of the Navy's Contractor Performance Assessment Reporting System (CPARS) and the Department of Defense's Past Performance Information Retrieval System (PPIRS), other customers known to the Government, consumer protection organizations, and others who may have useful and relevant information. The Government may evaluate past performance of the Offeror's proposed subcontractors, predecessor companies, or key personnel who have relevant experience to the extent warranted.Past performance information evaluated by the Government for the Offeror's performance as a prime Contractor and/or subcontractor, subcontractors, and the performance of their key personnel may include (but not be limited to) the following areas: relevancy, quality, cost control, schedule, business relationships, management of personnel, and customer satisfaction. Relevancy is determined based on the similarity of scope, magnitude, and complexity of the past performance submitted to the requirements requested. More recent and more relevant performance will have a greater positive impact on the past performance evaluation than a less recent or less relevant effort. Relevant performance at the subcontractor level will have a greater impact on the past performance evaluation than no record of relevant performance. Any Offeror with no record of relevant past performance will be given a "neutral" rating for past performance.Factor 4 - PriceInconsistencies between the data contained in the price proposal and the data contained in the proposal regarding the other factors may result in a lower overall evaluation of the total Proposal. Data submitted may be evaluated for price reasonableness. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced compared to estimates. Evaluation of options shall not obligate the Government to exercise the option(s).The proposed prices will be reviewed to determine whether they are materially unbalanced. An unbalanced offer will be determined to be unreasonably high or low and will not receive an award.DiscussionsThe Government reserves the right to hold or not to hold discussions.Award will be made contingent upon the bilateral signature of the parties. The Government reserves the right to award on an all or none basis.CLAUSES INCORPORATED BY REFERENCE52.203-3 Gratuities APR 198452.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper MAY 2011 52.204-7 System for Award Management OCT 2016 52.204-13 System for Award Management Maintenance OCT 2016 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-17 Ownership or Control of Offeror JUL 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-20 52.204-21 Predecessor of Offeror Basic Safeguarding of Covered Contractor InformationSystems JUL 2016 JUN 2016 52.212-1 Instructions to Offerors--Commercial Items JAN 2017 52.212-2 Evaluation - Commercial Items OCT 2014 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. OCT 2015 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.243-1 Changes--Fixed Price AUG 1987 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls OCT 2016 252.204-7011 Alternative Line Item Structure SEP 2011 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.204-7015252.209-7004 Notice of Authorized Disclosure of Information for Litigation SupportSubcontracting With Firms That Are Owned or ControlledBy The Government of a Country that is a State Sponsor ofTerrorismMAY 2016OCT 2015 252.213.7000 252.215-7007252.222-7007 Notice to Prospective Suppliers on Use of PastPerformance Information Retrieval System-Statistical Reporting in Past Performance EvaluationsNotice of Intent to ResolicitRepresentation Regarding Combating in Persons JUN 2015 JUN 2012JAN 2015 252.223-7008 Prohibition of Hexavalent Comium JUN 2013 252.225-7001252.225-7012 Buy American And Balance Of Payments Program-- Basic (Dec 2016)Preference For Certain Domestic Commodities DEC 2016DEC 2016 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010252.243-7002 Levies on Contract PaymentsRequests for Equitable Adjustment DEC 2006 DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.247-7023 Transportation of Supplies by Sea APR 2014CLAUSES INCORPORATED BY FULL TEXT52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JAN 2017)The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) tough (u) of this provision.(a) Definitions. As used in this provision --"Administrative merits determination" means certain notices or findings of labor law violations issued by an enforcement agency following an investigation. An administrative merits determination may be final or be subject to appeal or further review. To determine whether a particular notice or finding is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance."Arbitral award or decision" means an arbitrator or arbitral panel determination that a labor law violationoccurred, or that enjoined or restrained a violation of labor law. It includes an award or decision that is not final or is subject to being confirmed, modified, or vacated by a court, and includes an award or decision resulting from private or confidential proceedings. To determine whether a particular award or decision is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance."Civil judgment" means-(1) In paragraph (h) of this provision: A judgment or finding of a civil offense by any court of competent jurisdiction.(2) In paragraph (s) of this provision: Any judgment or order entered by any Federal or State court in which the court determined that a labor law violation occurred, or enjoined or restrained a violation of labor law. It includes a judgment or order that is not final or is subject to appeal. To determine whether a particular judgment or order is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance."DOL Guidance" means the Department of Labor (DOL) Guidance entitled: ``Guidance for Executive Order 13673, `Fair Pay and Safe Workplaces' ''. The DOL Guidance, dated August 25, 2016, can be obtained from www.dol.gov/fairpayandsafeworkplaces."Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program."Enforcement agency" means any agency granted authority to enforce the Federal labor laws. It includes the enforcement components of DOL (Wage and Hour Division, Office of Federal Contract Compliance Programs, and Occupational Safety and Health Administration), the Equal Employment Opportunity Commission, the Occupational Safety and Health Review Commission, and the National Labor Relations Board. It also means a State agency designated to administer an OSHA-approved State Plan, but only to the extent that the State agency is acting in its capacity as administrator of such plan. It does not include other Federal agencies which, in their capacity as contracting agencies, conduct investigations of potential labor law violations. The enforcement agencies associated with each labor law under E.O. 13673 are--(1) Department of Labor Wage and Hour Division (WHD) for--(i) The Fair Labor Standards Act;(ii) The Migrant and Seasonal Agricultural Worker Protection Act;(iii) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act;(iv) 41 U.S.C. chapter 67, formerly known as the Service Contract Act;(v) The Family and Medical Leave Act; and(vi) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors);(2) Department of Labor Occupational Safety and Health Administration (OSHA) for--(i) The Occupational Safety and Health Act of 1970; and(ii) OSHA-approved State Plans;(3) Department of Labor Office of Federal Contract Compliance Programs (OFCCP) for--(i) Section 503 of the Rehabilitation Act of 1973;(ii) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974; and(iii) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity);(4) National Labor Relations Board (NLRB) for the National Labor Relations Act; and(5) Equal Employment Opportunity Commission (EEOC) for--(i) Title VII of the Civil Rights Act of 1964;(ii) The Americans with Disabilities Act of 1990;(iii) The Age Discrimination in Employment Act of 1967; and(iv) Section 6(d) of the Fair Labor Standards Act (Equal Pay Act)."Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties."Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner."Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees."Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c)."Labor compliance agreement" means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters."Labor laws" means the following labor laws and E.O.s:(1) The Fair Labor Standards Act.(2) The Occupational Safety and Health Act (OSHA) of 1970.(3) The Migrant and Seasonal Agricultural Worker Protection Act.(4) The National Labor Relations Act.(5) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act.(6) 41 U.S.C. chapter 67, formerly known as the Service Contract Act.(7) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity).(8) Section 503 of the Rehabilitation Act of 1973.(9) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974.(10) The Family and Medical Leave Act.(11) Title VII of the Civil Rights Act of 1964.(12) The Americans with Disabilities Act of 1990.(13) The Age Discrimination in Employment Act of 1967.(14) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors).(15) Equivalent State laws as defined in the DOL Guidance. (The only equivalent State laws implemented in the FAR are OSHA-approved State Plans, which can be found at www.osha.gov/dcsp/osp/approved_state_plans.html)."Labor law decision" means an administrative merits determination, arbitral award or decision, or civil judgment, which resulted from a violation of one or more of the laws listed in the definition of ``labor laws''."Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--(1) PSC 5510, Lumber and Related Basic Wood Materials;(2) Product or Service Group (PSG) 87, Agricultural Supplies;(3) PSG 88, Live Animals;(4) PSG 89, Subsistence;(5) PSC 9410, Crude Grades of Plant Materials;(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;(8) PSC 9610, Ores;(9) PSC 9620, Minerals, Natural and Synthetic; and(10) PSC 9630, Additive Metal Materials."Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture."Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor."Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;(3) Consist of providing goods or services to marginalized populations of Sudan;(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;(5) Consist of providing goods or services that are used only to promote health or education; or(6) Have been voluntarily suspended.Sensitive technology--(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--(i) To restrict the free flow of unbiased information in Iran; or(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).Service-disabled veteran-owned small business concern--(1) Means a small business concern--(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16)."Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation."Small disadvantaged business concern", consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition."Subsidiary" means an entity in which more than 50 percent of the entity is owned--(1) Directly by a parent corporation; or(2) Tough another subsidiary of a parent corporation."Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often tough acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances."Veteran-owned small business concern" means a small business concern--(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and(2) The management and daily business operations of which are controlled by one or more veterans."Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women."Women-owned small business concern" means a small business concern--(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or(2) Whose management and daily business operations are controlled by one or more women."Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)", means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.Note to paragraph (a): By a court order issued on October 24, 2016, the following definitions in this paragraph (a) are enjoined indefinitely as of the date of the order: ``Administrative merits determination'', ``Arbitral award or decision'', paragraph (2) of ``Civil judgment'', ``DOL Guidance'', ``Enforcement agency'', ``Labor compliance agreement'', ``Labor laws'', and ``Labor law decision''. The enjoined definitions will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website.(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed tough https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ .[Offeror to identify the applicable paragraphs at (c) tough (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on ORCA.](c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.(1) Small business concern. The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a small business concern.(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a veteran-owned small business concern.(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern.(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a women-owned small business concern.Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition teshold.(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that--(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that--(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ -.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:___(10) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that--(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.(d) Certifications and representations required to implement provisions of Executive Order 11246--(1) Previous Contracts and Compliance. The offeror represents that--(i) It ( ___ ) has, ( ___ ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and(ii) It ( ___ ) has, ( ___ ) has not, filed all required compliance reports.(2) Affirmative Action Compliance. The offeror represents that--(i) It ( ___ ) has developed and has on file, ( ___ ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or(ii) It ( ___ ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American --Supplies, is included in this solicitation.)(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Supplies."(2) Foreign End Products:Line Item No. Country of Origin___ ______ ______ ___(List as necessary)(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.(g)(1) Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms ``Baainian, Moroccan, Omani, Panamanian, or Peruvian end product,'' ``commercially available off-the-shelf (COTS) item,'' ``component,'' ``domestic end product,'' ``end product,'' ``foreign end product,'' ``Free Trade Agreement country,'' ``Free Trade Agreement country end product,'' ``Israeli end product,'' and ``United States'' are defined in the clause of this solicitation entitled ``Buy American--Free Trade Agreements--Israeli Trade Act.''(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Baainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American--Free Trade Agreements--Israeli Trade Act'':Free Trade Agreement Country End Products (Other than Baainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No. Country of Origin___ ______ ______ ___[List as necessary](iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin___ ______ ______ ___[List as necessary](iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I (Jan 2004). If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American -Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No._________[List as necessary](3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II (Jan 2004). If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin___ ______ ______ ___[List as necessary](4) Buy American--Free Trade Agreements--Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Baainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American --Free Trade Agreements--Israeli Trade Act'':Free Trade Agreement Country End Products (Other than Baainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:Line Item No. Country of Origin___ ______ ______ ___[List as necessary](5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled ``Trade Agreements''.(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.Other End Products:Line Item No. Country of Origin___ ______ ______ ___[List as necessary](iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition teshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--(1) [ ___ ] Are, [ ___ ] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [ ___ ] Have, [ ___ ] have not, within a tee-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and(3) [ ___ ] Are, [ ___ ] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and(4) [ ___ ] Have, [ ___ ] have not, within a tee-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.(i) Taxes are considered delinquent if both of the following criteria apply:(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.(ii) Examples.(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights.(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).](1) Listed end products.Listed End Product Listed Countriesof Origin___ ______ ______ ___(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.][ ___ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.[ ___ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or(2) ( ___ ) Outside the United States.(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly--(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or(2) ( ___ ) Outside the United States.(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.)[The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.][ ___ ] (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror ( ___ ) does ( ___ ) does not certify that-(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.[ ___ ] (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror ( ___ ) does ( ___ ) does not certify that-(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));(iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers.(3) If paragraph (k)(1) or (k)(2) of this clause applies-(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and(ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.(l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.)(1) All offerors must submit the information required in paragraphs (l)(3) tough (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS).(2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.(3) Taxpayer Identification Number (TIN).( ___ ) TIN: --------------------.( ___ ) TIN has been applied for.( ___ ) TIN is not required because:( ___ ) Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;( ___ ) Offeror is an agency or instrumentality of a foreign government;( ___ ) Offeror is an agency or instrumentality of the Federal Government.(4) Type of organization.( ___ ) Sole proprietorship;( ___ ) Partnership;( ___ ) Corporate entity (not tax-exempt);( ___ ) Corporate entity (tax-exempt);( ___ ) Government entity (Federal, State, or local);( ___ ) Foreign government;( ___ ) International organization per 26 CFR 1.6049-4;( ___ ) Other ----------.(5) Common parent.( ___ ) Offeror is not owned or controlled by a common parent;( ___ ) Name and TIN of common parent:Name - ___ .TIN - ___ .(m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.(n) Prohibition on Contracting with Inverted Domestic Corporations-(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.(2) Representation. By submission of its offer, the offeror represents that--(i) It is not an inverted domestic corporation; and(ii) It is not a subsidiary of an inverted domestic corporation.(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.(1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov.(2) Representation. The Offeror represents that--(i) It [ ___ ] is, [ ___ ] is not an inverted domestic corporation; and(ii) It [ ___ ] is, [ ___ ] is not a subsidiary of an inverted domestic corporation.(3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and(ii) The offeror has certified that all the offered products to be supplied are designated country end products.(p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a unique entity identifier in the solicitation.(1) The Offeror represents that it [ ___ ] has or [ ___ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.(2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information:Immediate owner CAGE code: ___ Immediate owner legal name: ___ (Do not use a "doing business as" name)Is the immediate owner owned or controlled by another entity:[ ___ ] Yes or [ ___ ] No.(3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:Highest level owner CAGE code: ___ Highest level owner legal name: ___ (Do not use a "doing business as" name)(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law.(1) As required by section 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that-(i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless and agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or(ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(2) The Offeror represents that--(i) It is [ ___ ] is not [ ___ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and (ii) It is [ ___ ] is not [ ___ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.(r) Predecessor of Offeror. (Applies in all solicitations that include the provision at 52.204-16, Commercial and Government Entity Code Reporting.)(1) The Offeror represents that it [ ___ ] is or [ ___ ] is not a successor to a predecessor that held a Federal contract or grant within the last tee years.(2) If the Offeror has indicated ``is'' in paragraph (r)(1) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last tee years (if more than one predecessor, list in reverse conological order):Predecessor CAGE code: ___ (or mark ``Unknown'').Predecessor legal name: ___ .(Do not use a ``doing business as'' name).(s) Representation regarding compliance with labor laws (Executive Order 13673). If the offeror is a joint venture that is not itself a separate legal entity, each concern participating in the joint venture shall separately comply with the requirements of this provision.(1)(i) For solicitations issued on or after October 25, 2016 tough April 24, 2017: The Offeror [ ___ ] does [ ___ ] does not anticipate submitting an offer with an estimated contract value of greater than $50 million.(ii) For solicitations issued after April 24, 2017: The Offeror [ ___ ] does [ ___ ] does not anticipate submitting an offer with an estimated contract value of greater than $500,000.(2) If the Offeror checked ``does'' in paragraph (s)(1)(i) or (ii) of this provision, the Offeror represents to the best of the Offeror's knowledge and belief [Offeror to check appropriate block]:[ ___ ](i) There has been no administrative merits determination, arbitral award or decision, or civil judgment for any labor law violation(s) rendered against the offeror (see definitions in paragraph (a) of this section) during the period beginning on October 25, 2015 to the date of the offer, or for tee years preceding the date of the offer, whichever period is shorter; or[ ___ ](ii) There has been an administrative merits determination, arbitral award or decision, or civil judgment for any labor law violation(s) rendered against the Offeror during the period beginning on October 25, 2015 to the date of the offer, or for tee years preceding the date of the offer, whichever period is shorter.(3)(i) If the box at paragraph (s)(2)(ii) of this provision is checked and theContracting Officer has initiated a responsibility determination and has requested additional information, the Offeror shall provide--(A) The following information for each disclosed labor law decision in the System for Award Management (SAM) at www.sam.gov, unless the information is already current, accurate, and complete in SAM. This information will be publicly available in the Federal Awardee Performance and Integrity Information System (FAPIIS):(1) The labor law violated.(2) The case number, inspection number, charge number, docket number, or other unique identification number.(3) The date rendered.(4) The name of the court, arbitrator(s), agency, board, or commission that rendered the determination or decision;(B) The administrative merits determination, arbitral award or decision, or civil judgment document, to the Contracting Officer, if the Contracting Officer requires it;(C) In SAM, such additional information as the Offeror deems necessary to demonstrate its responsibility, including mitigating factors and remedial measures such as offeror actions taken to address the violations, labor compliance agreements, and other steps taken to achieve compliance with labor laws. Offerors may provide explanatory text and upload documents. This information will not be made public unless the contractor determines that it wants the information to be made public; and(D) The information in paragraphs (s)(3)(i)(A) and (s)(3)(i)(C) of this provision to the Contracting Officer, if the Offeror meets an exception to SAM registration (see FAR 4.1102(a)).(ii)(A) The Contracting Officer will consider all information provided under (s)(3)(i) of this provision as part of making a responsibility determination.(B) A representation that any labor law decision(s) were rendered against the Offeror will not necessarily result in withholding of an award under this solicitation. Failure of the Offeror to furnish a representation or provide such additional information as requested by the Contracting Officer may render the Offeror nonresponsible.(C) The representation in paragraph (s)(2) of this provision is a material representation of fact upon which reliance was placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous representation, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this solicitation in accordance with the procedures set forth in FAR 12.403.(4) The Offeror shall provide immediate written notice to the Contracting Officer if at any time prior to contract award the Offeror learns that its representation at paragraph (s)(2) of this provision is no longer accurate.(5) The representation in paragraph (s)(2) of this provision will be public information in the Federal Awardee Performance and Integrity Information System (FAPIIS).Note to paragraph (s): By a court order issued on October 24, 2016, this paragraph (s) is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(t) Public Disclosure of Greenhouse Gas Emissions and Reduction Goals. Applies in all solicitations that require offerors to register in SAM (52.212-1(k)).(1) This representation shall be completed if the Offeror received $7.5 million or more in contract awards in the prior Federal fiscal year. The representation is optional if the Offeror received less than $7.5 million in Federal contract awards in the prior Federal fiscal year.(2) Representation. [Offeror to check applicable block(s) in paragraph (t)(2)(i) and (ii)]. (i) The Offeror (itself or tough its immediate owner or highest-level owner) [ ___ ] does, [ ___ ] does not publicly disclose greenhouse gas emissions, i.e., makes available on a publicly accessible Web site the results of a greenhouse gas inventory, performed in accordance with an accounting standard with publicly available and consistently applied criteria, such as the Greenhouse Gas Protocol Corporate Standard.(ii) The Offeror (itself or tough its immediate owner or highest-level owner) [ ___ ] does, [ ___ ] does not publicly disclose a quantitative greenhouse gas emissions reduction goal, i.e., make available on a publicly accessible Web site a target to reduce absolute emissions or emissions intensity by a specific quantity or percentage.(iii) A publicly accessible Web site includes the Offeror's own Web site or a recognized, third-party greenhouse gas emissions reporting program.(3) If the Offeror checked ``does'' in paragraphs (t)(2)(i) or (t)(2)(ii) of this provision, respectively, the Offeror shall provide the publicly accessible Web site(s) where greenhouse gas emissions and/or reduction goals are reported: ___ .(u)(1) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions), Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with an entity that requires employees or subcontractors of such entity seeking to report waste, fraud, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.(2) The prohibition in paragraph (u)(1) of this provision does not contravene requirements applicable to Standard Form 312 (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.(3) Representation. By submission of its offer, the Offeror represents that it will not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).(End of provision)52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017)(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).___ (5) [Reserved]___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).____ (10) [Reserved]____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).____ (ii) Alternate I (NOV 2011) of 52.219-3.____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).____ (ii) Alternate I (JAN 2011) of 52.219-4.____ (13) [Reserved](14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).____ (ii) Alternate I (NOV 2011).____ (iii) Alternate II (NOV 2011).____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).____ (ii) Alternate I (Oct 1995) of 52.219-7.____ (iii) Alternate II (Mar 2004) of 52.219-7.X (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).____ (ii) Alternate I (Nov 2016) of 52.219-9.____ (iii) Alternate II (Nov 2016) of 52.219-9.____ (iv) Alternate III (Nov 2016) of 52.219-9.____ (v) Alternate IV (Nov 2016) of 52.219-9.(18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).X (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).____ (20) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).X (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).X (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).X (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).X (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).X (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).X (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).X (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 tough April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017).Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016).____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).____ (ii) Alternate I (OCT 2015) of 52.223-13.____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).____ (ii) Alternate I (Jun 2014) of 52.223-14.____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).____ (ii) Alternate I (Jun 2014) of 52.223-16.X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).____ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693).____ (46) 52.223-21, Foams (June, 2016) (E.O. 13693).____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).____ (ii) Alternate I (JAN 2017) of 52.224-3.____ (48) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).____(49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.____ (ii) Alternate I (May 2014) of 52.225-3.____ (iii) Alternate II (May 2014) of 52.225-3.____ (iv) Alternate III (May 2014) of 52.225-3.____ (50) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).X (51) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).____ (56) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).X (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (July 2013) (31 U.S.C. 3332).____ (58) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (July 2013) (31 U.S.C. 3332).(59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).(60) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).____ (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).____ (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).____ (ii) Alternate I (Apr 2003) of 52.247-64.(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)_____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)._____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67)._____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67)._____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67)._____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67)._____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67)._____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67)._____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658)._____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706)._____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792)._____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition teshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.(iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).(xii) __X (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627)._____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)(xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).(xvi)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).(xvii) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016) (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 tough April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017).Note to paragraph (e)(1)(xvii): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.(xviii) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016)).(xix) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).(B) Alternate I (JAN 2017) of 52.224-3.(xx) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.(xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.(End of clause)52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):http://farsite.hill.af.mil/vffara.htm(End of provision)52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):http://farsite.hill.af.mil/vffara.htm(End of clause)52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984)(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the provision.(b) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.(End of provision)52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.(b) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.(End of clause)252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)(a) Definitions. As used in this clause-Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.Concatenated unique item identifier means--(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.Government's unit acquisition cost means--(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:------------------------------------------------------------------------Contract line, subline, or exhibitline item No. Item description------------------------------------------------------------------------...................................------------------------------------------------------------------------(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:------------------------------------------------------------------------Contract line, subline, or exhibitline item No. Item description------------------------------------------------------------------------...................................------------------------------------------------------------------------(If items are identified in the Schedule, insert ``See Schedule'' in this table.)(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following tee types of data qualifiers, as determined by the Contractor:(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.(5) Unique item identifier.(i) The Contractor shall--(A) Determine whether to--(1) Serialize within the enterprise identifier;(2) Serialize within the part, lot, or batch number; or(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.(ii) The issuing agency code--(A) Shall not be placed on the item; and(B) Shall be derived from the data qualifier for the enterprise identifier.(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:(1) Unique item identifier.(2) Unique item identifier type.(3) Issuing agency code (if concatenated unique item identifier is used).(4) Enterprise identifier (if concatenated unique item identifier is used).(5) Original part number (if there is serialization within the original part number).(6) Lot or batch number (if there is serialization within the lot or batch number).(7) Current part number (optional and only if not the same as the original part number).(8) Current part number effective date (optional and only if current part number is used).(9) Serial number (if concatenated unique item identifier is used).(10) Government's unit acquisition cost.(11) Unit of measure.(12) Type designation of the item as specified in the contract schedule, if any.(13) Whether the item is an item of Special Tooling or Special Test Equipment.(14) Whether the item is covered by a warranty.(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.(2) Unique item identifier of the embedded subassembly, component, or part.(3) Unique item identifier type.**(4) Issuing agency code (if concatenated unique item identifier is used).**(5) Enterprise identifier (if concatenated unique item identifier is used).**(6) Original part number (if there is serialization within the original part number).**(7) Lot or batch number (if there is serialization within the lot or batch number).**(8) Current part number (optional and only if not the same as the original part number).**(9) Current part number effective date (optional and only if current part number is used).**(10) Serial number (if concatenated unique item identifier is used).**(11) Description.** Once per item.(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.(2) Embedded items shall be reported by one of the following methods--(i) Use of the embedded items capability in WAWF;(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.(End of clause)252.211-7008 USE OF GOVERNMENT-ASSIGNED SERIAL NUMBERS (SEP 2010)(a) Definitions. As used in this clause--Government-assigned serial number means a combination of letters or numerals in a fixed human-readable information format (text) conveying information about a major end item, which is provided to a contractor by the requiring activity with accompanying technical data instructions for marking the Government-assigned serial number on major end items to be delivered to the Government.Major end item means a final combination of component parts and/or materials which is ready for its intended use and of such importance to operational readiness that review and control of inventory management functions (procurement, distribution, maintenance, disposal, and asset reporting) is required at all levels of life cycle management. Major end items include aircraft; ships; boats; motorized wheeled, tracked, and towed vehicles for use on highway or rough terrain; weapon and missile end items; ammunition; and sets, assemblies, or end items having a major end item as a component.Unique item identifier (UII) means a set of data elements permanently marked on an item that is globally unique and unambiguous and never changes in order to provide traceability of the item toughout its total life cycle. The term includes a concatenated UII or a DoD-recognized unique identification equivalent.(b) The Contractor shall mark the Government-assigned serial numbers on those major end items as specified by line item in the Schedule, in accordance with the technical instructions for the placement and method of application identified in the terms and conditions of the contract.(c) The Contractor shall register the Government-assigned serial number along with the major end item's UII at the time of delivery in accordance with the provisions of the clause at DFARS 252.211-7003(d).(d) The Contractor shall establish the UII for major end items for use toughout the life of the major end item. The Contractor may elect, but is not required, to use the Government-assigned serial number to construct the UII.(End of clause)252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)(a) Definitions. As used in this clause--Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submissionof Payment Requests and Receiving Reports.(c) WAWF access. To access WAWF, the Contractor shall--(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests toughWAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/.(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:(1) Document type. The Contractor shall use the following document type(s).COMBO(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.N64709, STRATEGIC WEAPONS FACILITY ATLANTIC(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in thesystem.Routing Data Table*--------------------------------------------------------------------------------------------Field Name in WAWF Data to be entered in WAWF--------------------------------------------------------------------------------------------Pay Official DoDAAC N68732Issue By DoDAAC N64709Admin DoDAAC N64709Inspect By DoDAAC N/AShip To Code N/AShip From Code ____Mark For Code ____Service Approver (DoDAAC) N64709Service Acceptor (DoDAAC) N64709 LPO DoDAAC N64709DCAA Auditor DoDAAC ____Other DoDAAC ______--------------------------------------------------------------------------------------------(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system.Acceptor/COR: Daren Pocernik / 912-573-2231 / email: Daren.Pocernik@swflant.navy.mil(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.Lilliamor Bicanovsky/912-573-0547 email: lilliamor.bicanovsky@swflant.navy.milPamela King/912-573-4385 email: pamela.king@swflant.navy.mil(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.(End of clause)
N6470918R0005 Department of the Navy Strategic Systems Programs
3/19/18, 3:16 PM