DOTD Small Striping Machine(S42)

Solicitation # 3000024352
Posted 2/19/25, 1:00 AM
No Updates
Due 2/27/25, 12:59 AM
Source
No public source available
Similar Opportunities
The Louisiana Department of Transportation & Development (DOTD) is seeking sealed bids for 51 Pulsar portable traffic counter and classifier units (Part #82-1999) through a proprietary purchase with no substitutes permitted. The procurement is specifically for East Baton Rouge Parish and requires very precise equipment specifications, including single block aluminum housing, two road tube nozzles, one USB communications port, encapsulated electronics, lithium battery, communications...
The Louisiana Department of Transportation and Development (DOTD) is seeking to procure a Class 8 tractor truck through a competitive bidding process, with the solicitation (3000024330) targeting a tandem axle truck with a 53,200 lbs GVWR that meets state and federal safety and emission standards. The procurement specifically references an International HX620 as the reference model, with detailed technical specifications outlined in Attachment B, including requirements for a 14.8L electronic...
The Louisiana Department of Transportation and Development (DOTD) initiated a procurement opportunity for 4 mechanical sweeper trucks under RFx number 3000023737, targeting a 33,000 lb GVWR cab and chassis with a mechanical sweeper attachment. The solicitation, originally scheduled for bid opening on November 14, 2024, was subsequently cancelled on February 12, 2025, via Addendum No. 1 due to bid products not meeting technical specifications. The procurement encompasses a detailed technical...
The Louisiana Office of State Procurement is seeking bids for the Louisiana Department of Transportation and Development (DOTD) to purchase one 66,000 GVWR Heavy Haul Tractor Truck, specifically referencing the International HV613 model or an equivalent vehicle. The procurement is focused on a Class 8 tandem axle truck tractor that must meet all state and federal safety and emission standards, with extensive technical specifications including a 12.4L electronic diesel engine producing 500 HP,...
The Louisiana Department of Transportation and Development (DOTD) is seeking bids for two bumper pull 20 ft. container trailers through the Office of State Procurement, with the procurement specifically targeting suppliers in East Baton Rouge Parish and Baton Rouge City. The required trailers must meet detailed technical specifications, including a 24' total length, 8' width, 19'10" deck length, and 14,000 lb gross vehicle weight rating (GVWR). Key requirements include a 6" I-beam...
The Louisiana Department of Transportation and Development (DOTD) is soliciting bids for a comprehensive Barricade Kit procurement through Invitation to Bid #3000024303. The contract seeks to acquire 325 Type III panel assemblies and 570 leg assemblies for traffic channelizing during roadway maintenance. Each panel assembly consists of three 8' x 8" panels mounted on two 1" square steel uprights, featuring white and orange reflective sheeting from an approved manufacturer. The leg...

The Louisiana Department of Transportation and Development (DOTD) is soliciting emailed bids for a Small Striping Machine under RFx #3000024352, specifically seeking one Trantex TXEQ-360MIIT or equivalent machine that meets DOTD Equipment Specification 255-500E, Rev. 2-1-23. The procurement targets an operator-propelled 360 lb. capacity thermoplastic applicator designed for roadway marking, with strict technical requirements including a 650 lb frame capacity, 10" airless front wheels, 20 lb propane heating system, and a 50 lb glass bead dispensing system. Bids must be submitted via email to adrian.stallone@la.gov by February 26, 2025, at 11:59 PM CST, with the RFx No. required in the subject line to be considered. Delivery will be coordinated with Jarrett Lambert and accepted at 7686 Tom Drive, Baton Rouge, between 7:30 AM and 3:30 PM, Monday through Friday. Vendors must be registered in LaPac, in good standing with the Louisiana Secretary of State, and provide complete documentation including service policies, operator/service manuals, and build sheets upon delivery.

The procurement includes potential preference considerations for U.S. and Louisiana-manufactured products, with a 5% price differential for U.S. manufacturers and a 10% preference for Louisiana-produced items, contingent on workforce composition and specific manufacturing criteria. Bidders must complete and submit U.S. Preference and Louisiana Preference forms prior to bid opening to be eligible for these considerations. Vendors must have at least one authorized dealer in Louisiana capable of providing parts and service, and the equipment must be a new, current production model meeting all state and federal safety and emission standards. While no specific budget range is explicitly stated, the bid requires delivered pricing with no additional fees, and allows for up to 30-day payment terms with potential early payment discounts. Electronic Funds Transfer (EFT) payments are strongly encouraged, and all bid amounts must be submitted in U.S. dollars with pricing independently determined without collusion.

Generated 2/20/25, 8:19 AM