UT test calibration standards

Added: Sep 13, 2017 12:59 pm
AMENDMENT SUMMARY OF CHANGES

1. Solicitation close adjusted to 20 September at 4:00 PM.

2. Required Delivery Date adjusted to 9 March 2018.

3. Note added to advise offerors to include the cost of the data in the price of supplies.
4. CDRL numbering has been corrected to reflect 00A thru 00E vice 010 thru 014.

5. CDRL references in the item nomenclatures adjusted to reflect the numbering identified in item 4.

6. CDRL A007 removed from CLIN 0002 as it does not apply to CLIN 0001.

7. The following CDRLs have been changed:
• CDRLs A/B/C/D 004
• CDRLs A/B/C/D 006
• CDRLS B/C/D 007
• CDRLS B/C/D 00C
• CDRLS B/C/D 00E

8. Clause 52.212-2, Evaluation-Commercial Items, has been adjusted accordingly to reflect all changes.

9. Clause 52.211-8, Time of Delivery, has been changed to reflect the new RDD.

10. The amendment inadvertently overlooked a requirement to sign and submit a copy of the amendment with your order to verify you are quoting the latest version of this requirement. Thanks!

Offerors are cautioned that although the Contract Specialist has attempted to summarize the amendment here, the amendment should be reviewed prior to submitting your offer.
If there should be any questions, please direct them to the Government POC:
Michael "Mike" Schesser
Email: Michael.R.Schesser@navy.mil
Tel: 207-438-1931

Added: Aug 24, 2017 4:10 pm Modified: Sep 08, 2017 11:25 amTrack Changes THE GOVERNMENT, PORTSMOUTH NAVAL SHIPYARD LOCATED IN KITTERY, ME HAS AN URGENT, TIME SENSITIVE REQUIREMENT FOR UT CALIBRATION STANDARDS.  INTERESTED VENDORS MUST BE NAVSEA APPROVED TO PERFORM ELECTROSLAG WELDING ON VIRGINIA CLASS SHAFTS OR DEMONSTRATE THEY ARE USING A VENDOR WHO HAS BEEN NAVSEA APPROVED TO PERFORM ELECTROSLAG WELDING ON VIRGINIA CLASS SHAFTS.

IT IS RECOMMENDED THAT OFFERORS REVIEW ALL OF THE ATTACHMENTS WITH PARTICULAR EMPHASIS ON FAR 52.11-8 (PAGE 37 OF 63) AND FAR 52.212-2 (PAGE 42 OF 63).  THERE IS A SIGNFICANT AMOUNT OF DATA WHICH THE GOVERNMENT IS REQUIRING BE SUBMITTED WITH THE OFFER'S SUBMISSION IN ORDER TO EANBLE THE GOVERNMENT TO PERFORM A TECHNICAL COMPLIANCE REVIEW.  FAR 52.212-2 ATTEMPTS TO SUMMARIZE THESE REQUIREMENTS WHICH ARE IDENTIFIED IN THE ATTACHED DD 1423s.  THAT SAID VENDORS SHOULD REVIEW THE CONTRACT DATA REQUIRMENTS (DD 1423s) TO ENSURE ALL OF THE DATA REQUIRED FOR SUBMISSION WITH THE OFFER ARE PROVIDED.

WHEN SUBMITTING YOUR OFFER WITH THE REQUESTED DATA, PLEASE ENSURE THE DATA IS ANNOTATED TO ENABLE IT TO BE CROSS REFERENCED TO THE APPROPRIATE SEQ NUMBER SO THE CONTRACT SPECIALIST CAN PERFORM A PRELIMINARY INVENTORY OF THE REQUIRED SUBMISSIONS PRIOR TO FORWARDING TO TECHNICAL FOR TECHNICAL EVALUATION.

IF QUESTIONS SHOULD ARISE, YOU ARE ENCOURAGED TO CONTACT THE GOVERNMENT POC FOR THIS SOLICITATION:

MICHAEL "MIKE" SCHESSER
TEL:  207-438-1931
EMAIL:  MICHAEL.R.SCHESSER@NAVY.MIL

THIS AMENDMENT IS ISSUED WITHOUT AN AMENDMENT TO THE SOLICITATION AS THE AMENDMENT TO THE SOLICITATION WILL BE POSTED EARLY THE WEEK OF 10 SEPT.  BASED ON WHEN THE AMENDEMENT IS POSTED THE CLOSE MAY BE FURTHER EXTENDED.  THE AMENDMENT IS NECESSARY TO ENABLE THE GOVERNMENT TO FURTHER REFINE AND CLARIFY IT'S TECHNICAL COMPLIANCE CRITERIA AS WELL AS ADDRESS SOME ADMINISTRATIVE ISSUES REGARDING CDRL NUMBERING ETC.  THANKS FOR YOUR PATIENCE AND UNDERSTANDING.

Added: Aug 24, 2017 4:10 pm THE GOVERNMENT, PORTSMOUTH NAVAL SHIPYARD LOCATED IN KITTERY, ME HAS AN URGENT, TIME SENSITIVE REQUIREMENT FOR UT CALIBRATION STANDARDS.  INTERESTED VENDORS MUST BE NAVSEA APPROVED TO PERFORM ELECTROSLAG WELDING ON VIRGINIA CLASS SHAFTS OR DEMONSTRATE THEY ARE USING A VENDOR WHO HAS BEEN NAVSEA APPROVED TO PERFORM ELECTROSLAG WELDING ON VIRGINIA CLASS SHAFTS.

IT IS RECOMMENDED THAT OFFERORS REVIEW ALL OF THE ATTACHMENTS WITH PARTICULAR EMPHASIS ON FAR 52.11-8 (PAGE 37 OF 63) AND FAR 52.212-2 (PAGE 42 OF 63).  THERE IS A SIGNFICANT AMOUNT OF DATA WHICH THE GOVERNMENT IS REQUIRING BE SUBMITTED WITH THE OFFER'S SUBMISSION IN ORDER TO EANBLE THE GOVERNMENT TO PERFORM A TECHNICAL COMPLIANCE REVIEW.  FAR 52.212-2 ATTEMPTS TO SUMMARIZE THESE REQUIREMENTS WHICH ARE IDENTIFIED IN THE ATTACHED DD 1423s.  THAT SAID VENDORS SHOULD REVIEW THE CONTRACT DATA REQUIRMENTS (DD 1423s) TO ENSURE ALL OF THE DATA REQUIRED FOR SUBMISSION WITH THE OFFER ARE PROVIDED.

WHEN SUBMITTING YOUR OFFER WITH THE REQUESTED DATA, PLEASE ENSURE THE DATA IS ANNOTATED TO ENABLE IT TO BE CROSS REFERENCED TO THE APPROPRIATE SEQ NUMBER SO THE CONTRACT SPECIALIST CAN PERFORM A PRELIMINARY INVENTORY OF THE REQUIRED SUBMISSIONS PRIOR TO FORWARDING TO TECHNICAL FOR TECHNICAL EVALUATION.

IF QUESTIONS SHOULD ARISE, YOU ARE ENCOURAGED TO CONTACT THE GOVERNMENT POC FOR THIS SOLICITATION:

MICHAEL "MIKE" SCHESSER
TEL:  207-438-1931
EMAIL:  MICHAEL.R.SCHESSER@NAVY.MIL