USCGC alert (wmec 630) dockside

Added: Nov 19, 2010 1:22 pm The United States Coast Guard Surface Forces Logistics Center, Contracting and Procurement Branch 1, intends to issue a Commercial Request for Quote (RFQ) for Dockside Repairs to the USCGC ALERT (WMEC 630), a 210 FOOT "B' CLASS MEDIUM ENDURANCE CUTTER. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1,000 employees.

The acquisition will be issued as a 100% HUBZone Small Business Set-Aside, Best Value Request for Quote (RFQ), on or about December 15, 2010. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. This requirement will be evaluated using past performance as an evaluation factor. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service.
A CD-ROM containing all applicable drawings will be available free of charge to contractors upon request no later than six (6) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

The acquisition is for DOCKSIDE repairs to the USCGC ALERT (WMEC 630), a 210 FOOT "B' CLASS MEDIUM ENDURANCE CUTTER. All work shall be performed at the vessel's home pier: 2185 S.E. 12th Place, Warrenton, OR 97146. The performance period is scheduled for 52 days and is expected to start on or about April 19, 2011.

The scope of the acquisition will include, but is not limited to:
WORK ITEM 1: Anchor Windlass, Level 2 Inspect and Repair
WORK ITEM 2: Main Diesel Engine (MDE) Exhaust Piping , Clean and Inspect
WORK ITEM 3: Ship Service Diesel Generator (SSDG) Exhaust Piping, Clean and Inspect
WORK ITEM 4: Boiler Exhaust Piping , Clean and Inspect
WORK ITEM 5: Fuel Valves, Overhaul or Renew
WORK ITEM 6: Compressed Air System Valves , Inspect and Test
WORK ITEM 7: Helo Talon Grids, Inspect and Test
WORK ITEM 8: Forward Urinal Drain System, Clean and Flush
WORK ITEM 9: Firemain Valves, Overhaul or Renew
WORK ITEM 10: Steam Valves, Renew
WORK ITEM 11: Piping Insulation, Renew
WORK ITEM 12: Warping Capstan , Level 2 Inspect and Repair
WORK ITEM 13: Tanks (Potable Water), Preserve " 100% "
WORK ITEM 14: Signal Lights, Install
WORK ITEM 15: Mast Lighting Multi Cable Transit Block, Renew
WORK ITEM 16: Deck Covering (Wet/Dry), Seal
WORK ITEM 17: Deck Covering (Interior Wet/Dry) , Renew
WORK ITEM 18: Davit, Single Point, Level 2 Inspect and Repair
WORK ITEM 19: Starboard Laundry Bulkhead, Inspect, Preserve, and Re-insulate
WORK ITEM 20: SW Heat Exchangers; Clean, Inspect and Hydro
WORK ITEM 21: Ship Service Diesel Generator, Clean & Inspect
WORK ITEM 22: General Stores Compartment, Preserve and Repair
WORK ITEM 23: Compressed Air System Valves,Renew

No geographic restrictions. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.

All responsible sources may submit an offer which will be considered by the government