Tube assembly, metal

Added: Nov 10, 2015 11:03 am

This is a Sources Sought Notice only.  No synopsis and solicitation are being issued at this time.  The amount of information available for publication at this time is limited.  This notice is also issued for the purpose of market research in accordance with Federal Acquisition Regulation (FAR) Part 10.  Please review the approved source of supply below and provide us with any sources that are able to manufacture the NSN 4710015516240.  Also porovide the location (City and State) and POC for these manufacturers if available.  All of this information can be submitted to Heinrick Alfman.

TUBE ASSEMBLY, METAL. ENGINE, AIRCRAFT, F100 PW220 (F-15 C/D/E) FUEL SUPPLY, AUGMENTOR SPRAY ASSY CONSIST OF 1 EA TUBE, ELBOW, P/N 4028746, ELBOW, P/N 4081853, NUT P/N 4081854, AND WIRE

NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY.

THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI). . SOURCE INSPECTION REQUIRED . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. ,, WHEN FIRST ARTICLE IS REQUIRED IN THE CONTRACT, THE CONTRACTOR SHALL MARK THE OUTER SHIPPING CONTAINER IN 2 INCH BOLD, RED LETTERS "FIRST ARTICLE". THE CONTRACTOR SHALL ALSO PROVIDE THE TESTING FACILITY WRITTEN NOTIFICATION OF WHEN THE FIRST ARTICLES EXHIBITS WILL BE SHIPPED TWO WEEKS BEFORE THE SHIP DATE. ,, THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25.

CRITICAL APPLICATION ITEM

UNITED TECHNOLOGIES CORPORATION 52661 P/N 4081852-01 UNITED TECHNOLOGIES CORPORATION 77445 P/N 4081852-01 E. A. PATTEN CO., THE DBA 05819 P/N 4081852-01

IAW REFERENCE QAP 77445 QAD4028746 REVISION NR B DTD 06/20/1994 PART PIECE NUMBER:

IAW REFERENCE QAP 77445 QAD675680 REVISION NR DTD 01/01/1951 PART PIECE NUMBER:

IAW REFERENCE QAP 77445 QAD4081854 REVISION NR DTD 09/01/2006 PART PIECE NUMBER: