TF33 3rd and 4th Stage Turbine Blade Sets
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA812123R0025
- Agency
- Air Force Sustainment Center Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336412 Aircraft Engine and Engine Parts Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
The Federal Contract Opportunity involves the repair of TF33 Turbofan Engine 3rd and 4th Stage Low Speed Turbine Blades. The contractor is required to provide all necessary tooling, labor, material, parts, facilities, test equipment, and incidentals for the repair. The contractor is also expected to adhere to quality management systems, provide a Certificate of Conformance for each part repaired, and meet or exceed the delivery schedule.
Products and Services to be provided:
- Repair of TF33 Turbofan Engine 3rd and 4th Stage Low Speed Turbine Blades.
- Provision of all necessary tooling, labor, material, parts, facilities, and test equipment for the repair.
- Adherence to quality management systems.
- Provision of a Certificate of Conformance for each part repaired.
- Timely delivery of repaired parts.
Notice text
3 versions
Update #3 · Latest ·
This is an amendment to the solicitation for the Repair of TF33 3rd and 4th Stage Turbine Blade Sets. The above numbered solication is amended as set forth below.
Amendment 0002
FIRST: Extend the proposal due date as follows:
FROM: July 31, 2023 at 12:00 PM
TO: Aug 7, 2023 at 12:00 PM
SECOND: All other terms and conditions remain unchanged and in full force and effect.
End of Amendment 0002
This is an amendment to the solicitation for the Repair of TF33 3rd and 4th Stage Turbine Blade Sets. The above numbered solication is amended as set forth below.
Amendment 0001
FIRST: This is an amendment to incorporate the following clauses:
52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.
52.203-12 Limitation on Payments to Influence Certain Federal Transactions.
52.204-7 System for Award Management.
52.204-13 System for Award Management Maintenance.
52.204-21 Basic Safeguarding of Covered Contractor Information Systems.
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.
252.204-7019 Notice of NISTSP 800-171 DoD Assessment Requirements.
252.204-7020 NIST SP 800-171DoD Assessment Requirements.
SECOND: The hour and date specified for receipt of offeror is not extended.
THIRD: Except as provided herein, all terms and conditions remain unchanged and in full
force and effect.
This is small business set aside to Qualified Sources.
The Air Force Sustainment Center (AFSC/PZAAA) at Tinker Air Force Base, Oklahoma reserves the right to apply Delivery Protection Plan proceedures for the firm fixed price acquisition of aforementioned service.
Proposals will be accepted on or before the closing date, 12:00pm, July 31, 2023. Offerors shall include the completed RFP document (including prices, delivery, and clause fill ins IAW instructions to offerors) as well as the completed Pricing Matrix document.
Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs).
For Questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the AFSC Small Business Office at: AFSC/SB 3001 Staff Drive, Suite 1AG 85A Tinker AFB, OK 73145-3009 Email: afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp . The actual SAR Package submission itself shall be submitted electronically through DoD SAFE https://safe.apps.mil/. DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the POC email addresses below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the POC email addresses below, and ask that they "Request a Drop-Off" to your email address via DoD SAFE, which will enable you to be able to Upload the SAR Submission Package documents to DoD SAFE. 29SCMS.SASPO.Workflow@us.af.mil and stacy.cochran@us.af.mil.
Update #2 ·
This is an amendment to the solicitation for the Repair of TF33 3rd and 4th Stage Turbine Blade Sets. The above numbered solication is amended as set forth below.
Amendment 0001
FIRST: This is an amendment to incorporate the following clauses:
52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.
52.203-12 Limitation on Payments to Influence Certain Federal Transactions.
52.204-7 System for Award Management.
52.204-13 System for Award Management Maintenance.
52.204-21 Basic Safeguarding of Covered Contractor Information Systems.
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.
252.204-7019 Notice of NISTSP 800-171 DoD Assessment Requirements.
252.204-7020 NIST SP 800-171DoD Assessment Requirements.
SECOND: The hour and date specified for receipt of offeror is not extended.
THIRD: Except as provided herein, all terms and conditions remain unchanged and in full
force and effect.
This is small business set aside to Qualified Sources.
The Air Force Sustainment Center (AFSC/PZAAA) at Tinker Air Force Base, Oklahoma reserves the right to apply Delivery Protection Plan proceedures for the firm fixed price acquisition of aforementioned service.
Proposals will be accepted on or before the closing date, 12:00pm, July 31, 2023. Offerors shall include the completed RFP document (including prices, delivery, and clause fill ins IAW instructions to offerors) as well as the completed Pricing Matrix document.
Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs).
For Questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the AFSC Small Business Office at: AFSC/SB 3001 Staff Drive, Suite 1AG 85A Tinker AFB, OK 73145-3009 Email: afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp . The actual SAR Package submission itself shall be submitted electronically through DoD SAFE https://safe.apps.mil/. DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the POC email addresses below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the POC email addresses below, and ask that they "Request a Drop-Off" to your email address via DoD SAFE, which will enable you to be able to Upload the SAR Submission Package documents to DoD SAFE. 29SCMS.SASPO.Workflow@us.af.mil and stacy.cochran@us.af.mil.
Update #1 ·
This is a solicitation for the Repair of TF33 3rd and 4th Stage Turbine Blade Sets.
This is small business set aside to Qualified Sources.
The Air Force Sustainment Center (AFSC/PZAAA) at Tinker Air Force Base, Oklahoma reserves the right to apply Delivery Protection Plan proceedures for the firm fixed price acquisition of aforementioned service.
Proposals will be accepted on or before the closing date, 12:00pm, July 31, 2023. Offerors shall include the completed RFP document (including prices, delivery, and clause fill ins IAW instructions to offerors) as well as the completed Pricing Matrix document.
Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs).
For Questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the AFSC Small Business Office at: AFSC/SB 3001 Staff Drive, Suite 1AG 85A Tinker AFB, OK 73145-3009 Email: afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp . The actual SAR Package submission itself shall be submitted electronically through DoD SAFE https://safe.apps.mil/. DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the POC email addresses below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the POC email addresses below, and ask that they "Request a Drop-Off" to your email address via DoD SAFE, which will enable you to be able to Upload the SAR Submission Package documents to DoD SAFE. 29SCMS.SASPO.Workflow@us.af.mil and stacy.cochran@us.af.mil.
Attachments
| File | Type | Posted |
|---|---|---|
| FA8121-23-R-0025 0002.pdf | ||
| FA812123R0025RFP_Amendment0001.pdf | ||
| QA Pre Soliciation Conference.pdf | ||
| 3131191_UIIEC_REPORT.pdf | ||
| 1617474_RDL_REPORT.pdf | ||
| GFP_FA812123R0025_1.pdf | ||
| 3714558_PKGRQMT_REPORT.pdf | ||
| DID 80503.pdf | ||
| FA8121-23-R-0025 Turbine Blades.pdf | ||
| 3575356_QUALRQMT.pdf | ||
| 3131193_ITMDESC_REPORT.pdf | ||
| 3131195_QUALRQMT.pdf | ||
| 3570963_ITMDESC_REPORT.pdf | ||
| 3714553_TRNSPDATA_REPORT.pdf | ||
| 3707486_CDRL1_REPORT.pdf | ||
| 3710424_CAVAF reporting requirments.docx | DOCX document | |
| DID 80727A.pdf | ||
| 3707588_DID 81838.pdf | ||
| 3707587_DID 81832.pdf | ||
| PricingMatrix_TF33_3rd_and_4th_Turbine_Blade_Sets.xlsx | XLSX spreadsheet | |
| 3649886_RDL_REPORT.pdf | ||
| 3131196_UIIEC_REPORT.pdf | ||
| 3714524_PWS.docx | DOCX document | |
| DID 80441D.pdf | ||
| 3707589_DID 81995A.pdf |
Show all 25
Notice history
| Notice | Type | Posted |
|---|---|---|
| TF33 3rd and 4th Stage Turbine Blade Sets | Award Notice | |
| TF33 3rd and 4th Stage Turbine Blade Sets | Solicitation | |
| DRAFT RFP TF33 3rd and 4th Stage Turbine Blade Sets | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity