Surgical Instruments - Richmond VAMC

Added: Nov 24, 2017 10:30 am The Department of Veterans Affairs, Network Contracting Office 6, Hunter Holmes McGuire VA Medical Center, Richmond, VA intends to award a contract for the purchase of various Arthrex® Surgical Instruments. The NAICS code for this requirement is 339112 and business size standard is 1,000 employees.



This is not a request for bids, quotes, or proposals. This is a SOURCES SOUGHT announcement only. The purpose of this notice is to conduct market research and obtain information from qualified businesses. The responses to this announcement will assist in determining the socio-economic set aside if feasible. VA is required by Public Law 109-461 to give first priority to SDVOSB and VOSB concerns if there should be sufficient firms available to compete under a set aside. If insufficient veteran owned and small business response is received to establish the basis for setting this action aside for other than large business participation then the action will be advertised as full and open competition, in which case, all interested parties responding shall be eligible to bid.



The Richmond VA Medical Center, located at 1201 Broad Rock Blvd, Richmond, VA 23249 is seeking a potential qualified contractor than can provide the following items (no gray market items accepted):



ITEM DESCRIPTION

QUANTITY

RetroConstruction Drill Guide System Instrument Case

02

Hook, Multi-Use

02

Tibial PCL, Hook Arm

02

2.4 mm Guide Pin Sleeve

02

Obturator, 3.5 mm for Stepped Drill Sleeve

02

Parallel Guide Sleeve, 2.4 mm Pins

02

Tunnel Plug for 8, 9, 10, 11 and 12 mm Drill Holes

02

Cannulated Headed Reamer, 8 mm

02

Cannulated Headed Reamer, 9 mm

02

Cannulated Headed Reamer, 10 mm

02

Cannulated Headed Reamer, 11 mm

02

Reamer Handle and Pin Puller

02

2.4 mm, Ratchet Drill Sleeve

02

Footprint Femoral ACL Guide, Left

02

Footprint Femoral ACL Guide, Right

02

Stepped, Ratchet Drill Sleeve

02

RetroConstruction Drill Guide Handle, Side Release

02

Tunnel Notcher

02

ACL Cruciate ToolBox Instrumentation Case

02

Driver, Quick Connect BioComposite Interference Screw

02

Cannulated Screwdriver Shaft, 3.5 mm Hex, Ø5.5 mm x 17 cm

02

Tap, 7 mm, BioComposite, Interference Screw, Quick Connect

02

Tap, 8 mm, BioComposite, Interference Screw, Quick Connect

02

Tap, 9 mm, BioComposite, Interference Screw, Quick Connect

02

Ratcheting Screwdriver Handle

02

Chuck Key

02

Cannulated Headed Reamer, 12 mm

02

Suture Cutter, Open Ended, Left Notch

02

Knot Pusher, closed end

02

KingFisher Suture Retriever

02

Punch, for 5.5 mm Corkscrew FT, 4.75 mm and 5.5 mm SwiveLock

02

Extra Long Switching Stick, 4 mm

02

Suture Hook

02

Reusable Obturator for AR-6550, AR-6567 or AR-6570

02

Graft Sizing Block, 4.5-12 mm holes in 0.5 mm increments

02

GraftPro Graft Preparation System (includes the following items):

> Graft Sizing Block, 4.5-12 mm holes in 0.5 mm increments

> GraftPro, Adjustment Post

> GraftPro, RetroButton Holder

> GraftPro, Graft Preparation Board

> GraftPro, Graft Preparation Instrument Case

> GraftPro, GraftLink Holder

> GraftPro, GraftLink Tensioner

> GraftPro, Soft Tissue Clamp

02

Fibular Marking Hook

02

Collateral Ligament, Reconstruction Instrument Case

02

Tibial Collateral Marking Hook

02

Femoral Collateral Marking Hook

02

Collateral Ligament Retractor

02

Tenodesis Screw Instrumentation Set (includes the following items):

> Cannulated Drill, 4 mm

> Cannulated Drill, 4.5 mm

> Long Driver for 15 mm Bio-Tenodesis Screw

> Cannulated Headed Reamer, 5 mm

> Cannulated Headed Reamer, 5.5 mm

> Cannulated Headed Reamer, 6 mm

> Cannulated Headed Reamer, 6.5 mm

> Cannulated Headed Reamer, 7 mm

> Cannulated Headed Reamer, 7.5 mm

> Cannulated Headed Reamer, 8 mm

> Cannulated Headed Reamer, 8.5 mm

> Cannulated Headed Reamer, 9 mm

> Cannulated Headed Reamer, 10 mm

> Driver for 10 mm Bio-Tenodesis Screw

> Driver for 23 mm Bio-Tenodesis Screw

> Driver for 10 mm and 12 mm Bio-Tenodesis Screw

> Tenodesis Screw Instrumentation Case

> Tear Drop Handle w/Suture Cleat

02

PinLock II Cannulated Screwdriver, 3.5 mm Hex, 5.5 mm x 14 cm Long

02

Knee Scorpion

02

Pin Tip Tibial Marking Hook for RetroConstruction ACL Guide

02

Tap, 6 mm, BioComposite, Interference Screw, Quick Connect

02

Noncannulated Short Screwdriver Shaft, 2.5 mm Hex, 5.5 mm x 17 cm

02

ACL PCL Cortical Fixation Set (includes the following items):

> Staple Driver

> SLAP Hammer/Extractor

> Drill for Low Profile Cancellous Screws, 25 mm

> ACL PCL Cortical Fixation Instrument Case

> Drill for Bi-Cortical Post

> Tap (for 6.5 mm Bi-Cortical Post)

> 4.8 mm Drill for 6.5 mm Post

> Noncannulated Short Screwdriver Shaft, 2.5 mm Hex, 5.5 mm x 17 cm

> Screwdriver Shaft, Short 3.5 mm Hex, Cannulated

> Ratcheting Screwdriver Handle

> Depth Device, 2.7/ 3.5/ 4.0 mm, Low Profile

02

Chondro Pick Set (includes the following items):

> Chondro Pick, 20°

> Chondro Pick, 40°

> Chondro Pick, 60°

> Chondro Pick, 25°, Curved Tip

> Chondro Pick, 35°, Curved Tip

> Chondro Pick Instrument Case

02



This notice shall not be construed as a commitment by the Government to ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. All information submitted in response to this announcement is voluntary; the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government.

All information submitted in response to this Sources Sought notice become property of the Government.



Interested and capable respondents are requested to provide the information below. All responses to this notice shall include: company name, address, point of contact, phone number, DUNS number (www.dnb.com ), list of available compatible products, procurement source (open market or GSA Schedule), the geographical location the respondent is able to service, and documentation of authorized distributor certification (if a brand name product is intended for offer should the requirement go to solicitation).



(1) Business size (small or large business concern), and number of employees;



(2) Type of small business

a. Service Disabled Veteran Owned Small Business

b. Veteran Owned Small Business

c. Small Disadvantaged

d. HubZone

e. Woman Owned

f. Small Business



Responses to this notice should be emailed to Matthew R. Gray at Matthew.Gray@va.gov. Telephone responses will not be accepted. Responses must be received in writing no later than 28 November 2017 at 5:00 PM EST. This notice is to assist the VA in determining sources only. All contractors interested in doing business with the Government must be registered in the System for Award Management (SAM) database. The website for registration is www.sam.gov. Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses should also indicate whether the company is verified by the VA in the Vendor Information Pages (VIP) Database at www.vetbiz.gov.