OMAX Waterjet

Closed Solicitation Posted Sep 2, 2020

Solicitation number: FA5606-20-Q-2015
Agency: Air Forces Europe and Africa Air Force, Department of Defense
Responses due: Sep 16, 2020, 8:30 AM ET
Set-aside: No set-aside

Opportunity facts

NAICS code: 423830 Industrial Machinery and Equipment Merchant Wholesalers
PSC: 3441 Bending And Forming Machines
Place of performance: spangdahlem DEU

Notice details come from SAM.gov. Updated Sep 8, 2020.

About this opportunity

Written by GovTribe AI · Dec 29, 2023

The 52nd Fighter Wing of the Department of the Air Force at Spangdahlem Air Base in Germany seeks to procure an OMAX Model 55100 abrasive waterjet system and additional components. The solicitation requires the waterjet machine measure approximately 12'11" by 7'10" with a maximum load capacity of 400 pounds per square foot and include a 600 pound bulk abrasive hopper and 30 horsepower direct drive pump. Quotes are due by September 16th and must remain valid until October 1st. Award will be made to the lowest priced technically acceptable quote from a responsible contractor meeting the requirements.

There is no set-aside designation. The primary NAICS code is 333512 and PSC code is J019. The incumbent contractor is OMAX Corporation. The place of performance is Spangdahlem Air Base and the solicitation seeks to replace an existing OMAX waterjet system used for manufacturing and modeling on base. Required additional components include a tilt-a-jet, variable speed solids removal system, water recycle system with chiller, and unlimited software licenses with lifetime upgrades.

Notice text

2 versions

As posted on SAM.gov.

Update #2 · Latest · Sep 8, 2020

The 52d MXG is requesting an OMAX abrasive Water Jet to be used for manufacturing and modeling. Please see listing below for a full description of the required items. This requirement is to fit existing in components already in place and the system must have an AFNET certification by the Air Force Security Control Assessor which the software on this version of the OMAX abrasive Water Jet has. OMAX WaterJet Machining Center Model 55100 Brand name

1. Machine will be approximately 12' 11" by 7' 10" with maximum supported load of 400 lbs per sq ft, table size 10' 6" by 5' 5", 3 Phase 380-480VAC +-110%, 50-60Hz

2. Machine will be able to cut materials up to 4ft by 8ft

3. 600 lb Bulk Abrasive Hopper

4. Direct Drive Pump- 30 horsepower, output pressure, 60,000psi, maximum jet power 25.5 horsepower,

5. One piece integrated nozzle warranted for 500 hours,

6. Pallet of Garnet abrasive, approx 2200 lbs.

7. Meets and exceeds the federally mandated green energy requirement

Additional Components

1. Tilt a Jet

2. Variable Speed Solids Removal System

3. WRS Consumables Kit, Closed Loop System

4. Water Recycle System w/ 60,000 BTU/HR (5 Ton) Chiller and Laminar Filter, Single Pump

5. Material holding Kit

6. Nozzle Spare Parts Kit, Tilt-A-Jet, 5i

7. Basic Enduro MAX Pump Spares

8. Rotary Axis

9. Rotary Axis - ER40 Collet Adapter Kit

10. Rotary Axis - Universal Adapter Flange Kit

11. Unlimited Seats of Software

12. Software Upgrades for the Life of Machine

13. Pertinent Trainings

Question 1. In one line it says a table size of 10’ 6” by 5’ 5”, but in the next it says “cut materials up to 4ft by 8ft”. I just wanted to know which one is correct?

Response 1. Water Jet must be able to cut metal up to 4ft by 8ft sheets. Our recommendation to fit a full sheet of metal is a table size at least 10’6’ by 5’5”.

Update #1 · Sep 2, 2020