NCAO Fire Alarm System Replacement

NCAO Fire Alarm System Replacement.

NCAO Fire Alarm System Replacement.

NCAO Fire Alarm System Replacement.

NCAO Fire Alarm System Replacement.

The Mid-Pacific Region of the Bureau of Reclamation intends to issue an Invitation for Bid (IFB) for a firm fixed-price construction contract for NCAO Fire Alarm System Replacement. This procurement is restricted to HUBZone business concerns. The work to be performed is described below. The applicable North American Industry Classification System (NAICS) Code is 811219 and the related small business size standard is $20.5M. This notice is not an invitation for offers and the information presented in this announcement will not obligate the Bureau of Reclamation in any manner. The estimated cost of this project is between 1,000,000.00 and $5,000,000.00. The work is located at the Northern California Area Offices which are encompassed with ten facilities spread across Northern California, including Shasta powerplant, Keswick Powerplant, Trinity Powerplant, JF Carr powerplant, Spring Creek Powerplant, Lewiston Powerplant, Keswick office building, Shasta maintenance center, Shasta Dam and Shasta upper vista house. The project work will reside in Shasta and Trinity county.
PRINCIPAL COMPONENTS OF WORK:
A. Inspect existing Fire Alarm system for all ten facilities and provide inspection report.
B. Design Fire Alarm system for all ten facilities based on findings in inspection and in
accordance with codes including, but not limited to, NFPA 72 and NFPA 101.
C. Furnish, install and test Fire Alarm system for all ten facilities according to the approved design and code.
D. Furnish all Fire Alarm system devices (heat detectors, smoke detectors, pull stations,
horn / strobes, strobes) and cables / conductors.
E. Furnish and install Fire Alarm system control panel in all facilities with addressable
control panel.
F. Furnish and install conduit for new Fire Alarm system devices when existing conduits are found corrosive and degraded. Install/re-use existing conduit for connecting Fire Alarm devices based on condition of the existing conduit.
G. Connect the Fire Alarm of each facility with Elevator and HVAC systems in accordance with NFPA 72.
H. Furnish and install outdoor Fire Alarm system display for all facilities.
I. Connect and test existing cable tray fire detection system to the new fire alarm system
according to NFPA 72 code. Provide a report on test results, code-compliant options with
cost estimates and a recommendation to government.
J. Furnish and install beam detector in large open areas of powerplant to detect smoke from generator units. Control panel shall have features to disable beam detector during crane operation.
K. Furnish and install communication systems to communicate between fire alarm system
and Shasta control center room for all ten facilities. Fire Alarm should use existing
communication system, and should be capable of upgrading to radio, cell phone, and
fiber optic in future.
L. Provide as-built drawings for Fire Alarm system devices after Fire Alarm installations
and modifications.
M. Provide training and training materials for operation and maintenance of the Fire Alarm system to each facilities.
Solicitation 140R2019B0012 will be posted electronically via www.fedbizopps.gov on or about May 15, 2019. The date for receipt of offers will be approximately June 14, 2019. The solicitation must be downloaded at the above website; no paper copy of this solicitation will be distributed.
Prospective contractors MUST be actively registered in the System for Award Management (SAM) database at http://www.sam.gov to be eligible for award.
.