Manufacture Rubber Blocks

Added: Jun 08, 2016 12:04 pm Modified: Sep 12, 2016 5:12 pmTrack Changes

The Defense Logistics Agency, DLA Maritime Norfolk of Norfolk Naval Shipyard Contracting Office, intends to negotiate a Firm Fixed Price contract to procure Rubber Blocks manufactured to the industry specification of  ASTM D2000 M4BG610A14B14E014 to be used in Norfolk Naval Shipyard on board the USS SAN FANCISCO The North American Industry Classification System (NAICS) code is 339991(Gasket, packing, and sealing device manufacturing). The procurement will be 100% set aside for small business. The contract line item is as follows:

0001: Manufacture Rubber Blocks 18-1/2" X 24-3/4" X 2-3/4" thick to the industry specification of ASTM D2000 M4BG610A14B14E014 (296) EA

0002: Manufacture Rubber Blocks 20" X 25" X 2-3/4" Thick to the industry specification of ASTM D2000 M4BG610A14B14EO14 (24) EA

Ordering Data: ASTM D2000 M4BG610A14B14E014

•·       M - all values stated in SI units

•·       4 - Grade number;  the number 4 means additional requirement are called out in the classification such as A14, B14, and E014

•·       BG - material is polyurethane

•·       610 - hardness is 60  +/- 5 shore A; Tensile strength is a minimum of 1,450 psi, and Ultimate elongation is a minimum of 300%

•·       A14 - "A" means heat resistance, 14 means ASTM test is D 573 run for 70 hours at 100 Deg C.

•-          Hardness, max, points    +/-5

•-          Tensile strength, max, %   +/-15

•-          Ultimate elongation, max, %  -15

 •·       B14 - "B" means compression set resistance, 14 means ASTM test is D 395 using method B for 22hours, @ 100 Deg C with the following properties called out: 50 

•·       EO14 - "EO" means Fluid Resistance, 14 means ASTM test is D 471 IRM 901 Oil 70 hours, @ 100 Deg C with the following properties called out:

•-          Hardness, max, points, -7 to +5

•-          Tensile strength, max, %, -20

•-          Ultimate elongation, max, %, -40

•-          Volume, % -5 to +5 

The solicitation number is SPMYM1-16-Q-0078 Amendment 0001 is expected to be posted on or around 12 September and closed on 19 September 2016. Technical questions must be written and sent by email kristen.cote@navy.mil. Please make sure that the solicitation number (SPMYM1-16-Q-0078) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues.  

Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.fedbizopps.gov, as this office no longer issues hard-copy solicitations.  By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency. 

Added: Jul 06, 2016 8:56 am Modified: Sep 12, 2016 5:12 pmTrack Changes The solicitation number is SPMYM1-16-Q-0078 Amendment 0001 of the solicitation is expected to be posted on or around 12 September 2016 and closed on 19 September 2016.

Added: Jul 06, 2016 8:56 am The solicitation number is SPMYM1-16-Q-0078 and the solicitation is expected to be posted on or around 06 July 2016 and closed on 22 July 2016.

Added: Jun 08, 2016 12:04 pm Modified: Jun 08, 2016 5:12 pmTrack Changes

 The Defense Logistics Agency, DLA Maritime Norfolk of Norfolk Naval Shipyard Contracting Office, intends to negotiate a Firm Fixed Price contract to procure Rubber Blocks manufactured to the industry specification of  ASTM D2000 M2BG610A14B14E014 to be used in Norfolk Naval Shipyard on board the USS SAN FANCISCO The North American Industry Classification System (NAICS) code is 339991(Gasket, packing, and sealing device manufacturing). The procurement will be 100% set aside for small business. The contract line item is as follows:

0001: Manufacture Rubber Blocks 18-1/2" X 24-3/4" X 2-3/4" thick to the industry specification of ASTM D2000 M2BG610A14B14E014 (296) EA

0002: Manufacture Rubber Blocks 20" X 25" X 2-3/4" Thick to the industry specification of ASTM D2000 M2BG610A14B14E014 (24) EA

Ordering Data: ASTM D2000 M2BG610A14B14E014

•·       M - all values stated in SI units

•·       2 - Grade number;  the number 2 means additional requirement are called out in the classification such as A14, B14, and E014

•·       BG - material is polyurethane

•·       610 - hardness is 60  +/- 5 shore A; Tensile strength is a minimum of 1,450 psi, and Ultimate elongation is a minimum of 300%

•·       A14 - "A" means heat resistance, 14 means ASTM test is d 573 RUN FOR 70 HOURS AT 100 Deg C. However, there are no values for a Grade 2 material. This likely because urethanes don't change hardness & tensile properties under a test of a short duration like 70 hours.

•·       B14 - "B" means compression set resistance, 14 means ASTM test is D 395 using method B for 22hours, @ 100 Deg C with the following properties called out: 

Hardness change, -5 to +10

Max Tensile loss, 25%

Max Elongation loss, 45%

Volume change % -10 to -5

The solicitation number is SPMYM1-16-Q-0078 and the solicitation is expected to be posted on or around 30 June 2016 and closed on 12 July 2016. Technical questions must be written and sent by email kristen.cote@navy.mil. Please make sure that the solicitation number (SPMYM1-16-Q-0078) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues. 

Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.fedbizopps.gov, as this office no longer issues hard-copy solicitations.  By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency. 

Added: Jun 08, 2016 12:04 pm

 The Defense Logistics Agency, DLA Maritime Norfolk of Norfolk Naval Shipyard Contracting Office, intends to negotiate a Firm Fixed Price contract to procure Rubber Blocks manufactured to the industry specification of  ASTM D2000 M2BG610A14B14E014 to be used in Norfolk Naval Shipyard on board the USS SAN FANCISCO The North American Industry Classification System (NAICS) code is 339991(Gasket, packing, and sealing device manufacturing). The procurement will be 100% set aside for small business. The contract line item is as follows:

0001: Manufacture Rubber Blocks 18-1/2" X 24-3/4" X 2-3/4" thick to the industry specification of ASTM D2000 M2BG610A14B14E014 (296) EA

0002: Manufacture Rubber Blocks 20" X 25" X 2-3/4" Thick to the industry specification of ASTM D2000 M2BG610A14B14E014 (24) EA

Ordering Data: ASTM D2000 M2BG610A14B14E014

•·       M - all values stated in SI units

•·       2 - Grade number;  the number 2 means additional requirement are called out in the classification such as A14, B14, and E014

•·       BG - material is polyurethane

•·       610 - hardness is 60  +/- 5 shore A; Tensile strength is a minimum of 1,450 psi, and Ultimate elongation is a minimum of 300%

•·       A14 - "A" means heat resistance, 14 means ASTM test is d 573 RUN FOR 70 HOURS AT 100 Deg C. However, there are no values for a Grade 2 material. This likely because urethanes don't change hardness & tensile properties under a test of a short duration like 70 hours.

•·       B14 - "B" means compression set resistance, 14 means ASTM test is D 395 using method B for 22hours, @ 100 Deg C with the following properties called out: 

Hardness change, -5 to +10

Max Tensile loss, 25%

Max Elongation loss, 45%

Volume change % -10 to -5

The solicitation number is SPMYM1-16-Q-0078 and the solicitation is expected to be posted on or around 22 June 2016 and closed on 29 June 2016. Technical questions must be written and sent by email kristen.cote@navy.mil. Please make sure that the solicitation number (SPMYM1-16-Q-0078) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues. 

Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.fedbizopps.gov, as this office no longer issues hard-copy solicitations.  By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.