Install Denial Barrier and Pedstrian Walkway
Closed Pre-Solicitation Posted
A newer pre-solicitation was posted. See the latest pre-solicitation from .
- Solicitation number
- 70LGLY18RSSB00021
- Agency
- Federal Law Enforcement Training Center Department of Homeland Security
- Responses due
- Set-aside
- HUBZone
Opportunity facts
- Contract number
- 70LGLY18CSSB00011 Federal contract award
- NAICS code
- 238190 Other Foundation, Structure, and Building Exterior Contractors
- PSC
- Not on record
- Place of performance
- 1131 Chapel Crossing Road Glynco, Georgia 31524, United States
Notice details come from SAM.gov. Updated .
Notice text
5 versions
Update #5 · Latest ·
Each contractor will be required to complete and email the completed a DHS 11000-6 to the contracting officer prior to drawings being released.
Each contractor that plans to attend the public opening must submit a FTC-SEM-17Z to Terrence Johnson @ terrence.johnson@fletc.dhs.gov or at least report to B1 Main Secuirty for access to FLETC NLT 1200 on the bid opening day. Please submit the 17z NLT than 1400 on September 7, 2018. The public opening will at B93 on September 10, 2018..
Update #4 ·
Each contractor will be required to complete and email the completed a DHS 11000-6 to the contracting officer prior to drawings being released..
Update #3 ·
The contractor will be required to complete a DHS 11000-6 prior to drawings being released..
Update #2 ·
Denial Barrier and Pedestrian Walkway at the Federal Law Enforcement Training Center
1. Demolition of ±76 LF of 4' concrete sidewalk.
2. Demolition of (1) bollard.
3. Removal of traffic striping as necessary to install new denial barrier and new crosswalks.
4. Removal of ±73 LF of chain-link fence with 3-strand barbed wire.
5. Removal of (2) cantilever gates with (1) gate operator. Contractor shall coordinate with Contracting Officer's Representative (COR) for location to store existing cantilever gates and operator.
6. Sawcut and remove ±85 SY of asphalt pavement and base necessary to install new denial barrier mat foundation.
7. Remove and relocate (1) sign as necessary to install concrete sidewalk.
8. Install and maintain ±461 LF of 'Type-B' Non-sensitive Silt Fence.
9. Install ±231 LF of 5' concrete sidewalk along with 14.33' x 25' concrete pad at proposed security turnstile location.
10. Install ±91 LF of 4' concrete sidewalk.
11. Install (4) accessible ramps per GDOT Detail 'A-3.'
12. Install (3) 24" x 24" wireless solar powered LED pedestrian warning signs.
13. Install (1) MUTCD R10-15 advanced warning sign.
14. Install (2) crosswalks per detail provided in drawings.
15. Provide and Install ±36 LF of chain-link fence with 3-strand barbed-wire. Fence to
16. Provide and Install (1) 6' chain-link pedestrian gate with lock.
17. Provide and Install 2-Leaf manual operated swing gate.
18. Provide and Install Full Height Security Turnstile.
19. Provide and Install Full Height Pedestrian Gate.
20. Provide and Install ±4 LF of Full Height Powdered-Coated Security Fencing or equivalent.
21. Provide and Install PIV Card Access Reader.
22. Provide and Install (22) 10' New Jersey concrete barriers.
23. Provide and Install (1) Active Vehicle Barrier with Battery Backup.
Contractor shall install approved active vehicle barrier per manufacturer recommendations. Work to include materials, labor, and equipment to route power to existing electrical panel shown on plans..
Update #1 ·
Denial Barrier and Pedestrain Walkway at the Federal Law Enforcement Training Center
1. Demolition of ±76 LF of 4' concrete sidewalk.
2. Demolition of (1) bollard.
3. Removal of traffic striping as necessary to install new denial barrier and new crosswalks.
4. Removal of ±73 LF of chain-link fence with 3-strand barbed wire.
5. Removal of (2) cantilever gates with (1) gate operator. Contractor shall coordinate with Contracting Officer's Representative (COR) for location to store existing cantilever gates and operator.
6. Sawcut and remove ±85 SY of asphalt pavement and base necessary to install new denial barrier mat foundation.
7. Remove and relocate (1) sign as necessary to install concrete sidewalk.
8. Install and maintain ±461 LF of 'Type-B' Non-sensitive Silt Fence.
9. Install ±231 LF of 5' concrete sidewalk along with 14.33' x 25' concrete pad at proposed security turnstile location.
10. Install ±91 LF of 4' concrete sidewalk.
11. Install (4) accessible ramps per GDOT Detail 'A-3.'
12. Install (3) 24" x 24" wireless solar powered LED pedestrian warning signs.
13. Install (1) MUTCD R10-15 advanced warning sign.
14. Install (2) crosswalks per detail provided in drawings.
15. Provide and Install ±36 LF of chain-link fence with 3-strand barbed-wire. Fence to
16. Provide and Install (1) 6' chain-link pedestrian gate with lock.
17. Provide and Install 2-Leaf manual operated swing gate.
18. Provide and Install Full Height Security Turnstile.
19. Provide and Install Full Height Pedestrian Gate.
20. Provide and Install ±4 LF of Full Height Powdered-Coated Security Fencing or equivalent.
21. Provide and Install PIV Card Access Reader.
22. Provide and Install (22) 10' New Jersey concrete barriers.
23. Provide and Install (1) Active Vehicle Barrier with Battery Backup.
Contractor shall install approved active vehicle barrier per manufacturer recommendations. Work to include materials, labor, and equipment to route power to existing electrical panel shown on plans..
Attachments
| File | Type | Posted |
|---|---|---|
| _Redacted.pdf | ||
| Solicitation_70LGLY18RSSB00021.pdf | ||
| DHS_Form_11000-6.pdf | ||
| ATTACHMENTS.docx | DOCX document | |
| Solicitation_70LGLY18RSSB00021.pdf | ||
| FTC-OSPR-17z.pdf | ||
| Exhibit_A_-_Proposal_breakdown.xls | XLS spreadsheet | |
| DHS_Form_11000-6.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Denial Barrier and Pedestrian Walkway | Pre-Solicitation | |
| Install Denial Barrier and Pedstrian Walkway | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity