Injection Molded Viton Seals for ECLSS SBAR System
Closed Solicitation Posted
- Solicitation number
- 80NSSC26932799Q
- Agency
- Shared Services Center National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 339991 Gasket, Packing, and Sealing Device Manufacturing
- Place of performance
- Huntsville, Alabama 35812, United States
- Points of contact
-
- Tracy Bremer tracy.g.bremer@nasa.gov (228) 813-6136
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center seeks injection molded Viton seals for the ECLSS SBAR system through a sole-source procurement from C T GASKET & POLYMER CO INC A, with capability statements due May 15, 2026 by 4:00 p.m. Central Time. The procurement carries a sole-source intent under FAR 12.102(a), and the Government reserves the right to convert to competitive basis based on responses received.
Place of performance is Marshall Space Flight Center in Huntsville, Alabama. The contractor must develop injection molds from NASA-provided valve drawings and deliver seals conforming to two specified drawings for cabin air and vacuum valve applications. Seals must be permanently bonded to the valve body, fully continuous in both radial and axial directions, and accompanied by acceptable Viton formulation data. NASA will furnish valves to the contractor for seal injection molding, with finished units delivered to MSFC no later than 10 weeks after contract award. The vendor must demonstrate highly capable, specialized expertise in Viton seal injection molding and mold development.
The NAICS code is 339991, Gasket, Packing, and Sealing Device Manufacturing; PSC code is 6695, Combination and Miscellaneous Instruments. Commercial items procedures under FAR Part 12 apply. The Government intends to acquire using commercial item provisions, clauses, and procedures. NASA FAR Supplement Clause 1852.215-84 (Ombudsman) applies; the Center Ombudsman is listed at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf. Oral communications are not acceptable. Point of contact is Tracy Bremer, Procurement Specialist, tracy.g.bremer@nasa.gov.
Notice text
NASA/NSSC has a requirement for Injection Molded Viton Seals for ECLSS SBAR System.
NASA/NSSC intends to issue a sole source contract to C T GASKET & POLYMER CO INC A, 12308 Cutten
RD, Houston, Texas, 77066-1808, United States under the authority of FAR 12.102(a). It has been determined
that C T GASKET & POLYMER CO INC A is the sole provider of Injection Molded Viton Seals for ECLSS SBAR
System.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space
Flight Center (MSFC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures
prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 339991.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the
identified point of contact not later than 4:00 p.m. Central Standard Time on 5/15/2026. Such
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the
government.
Oral communications are not acceptable in response to this notice.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this
acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-
Advocate-Listing.pdf .
Primary Point of Contact:
Tracy Bremer
Procurement Specialist
tracy.g.bremer@nasa.gov
Attachments
| File | Type | Posted |
|---|---|---|
| SOW.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity