Indicator fault LOC

Added: Aug 17, 2016 3:22 pm

 

This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR

PROPOSALS, QUOTATIONS, OR BIDS. All of the following information is approximate and may be altered in the actual solicitation. Responses to this sources sought announcement will be used by the

Government to make appropriate acquisition decisions.

 DLA Land and Maritime anticipates issuing a solicitation in the near future for approximately 53 each of NSN  6625-014553846 on Solicitation Number SPE7M216R0065. Item will be purchased I/A/W the following:

 INDICATOR,FAULT LOC

*

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

 

FAR CLAUSE 52.246-11 APPLIES.  A QUALITY MANAGEMENT PROGRAM MEETING THE

REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008

(EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;

OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008

(EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE

OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS

REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES

WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS

EXCLUSIONS TO THIS DOCUMENT.

DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

 

4.1 General requirements, [excluding reference to 1.2 and excluding NOTE

3 c)]

4.2.1 General, [excluding subparagraph a)]

4.2.2 Quality manual, [excluding subparagraph a)]

4.2.3 Control of documents

4.2.4 Control of records

5.1 Management commitment

5.3 Quality policy

6.2.2 Competence, training and awareness

6.4 Work environment

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to the product

7.2.2 Review of requirements related to the product

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.1 Purchasing process

7.4.3 Verification of purchased product

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6 Control of monitoring and measuring equipment

8.1 General, [excluding subparagraph b) and subparagraph c)]

8.2.2 Internal audit

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

 

*

*

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

*

THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE

(ODS) IN THE DESIGN, MANUFACTURING, TESTING,

CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM

UNDER ANY MILITARY OR FEDERAL SPECIFICATION,

STANDARD OR DRAWING REFERENCED IN THIS ITEM

DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE

WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS

OBTAINED.  THIS PROHIBITION SUPERSEDES ALL

SPECIFICATION REQUIREMENTS BUT DOES NOT

ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.

THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS

DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-

ONLY ITEMS.

*

NOTE:  THE CITED DRAWING IS A SOURCE CONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED.  EVEN THOUGH SOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING.  OFFERORS WHO ARE INTERESTED IN

QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THIS TIME.

 

TELEDYNE CONTROLS, LLC DBA 98571 P/N 843591-3

 

IAW BASIC DRAWING NR 78286 70550-01108

REVISION NR R   DTD 03/12/2007

PART PIECE NUMBER: 70550-01108-107

 

IAW REFERENCE DRAWING NR 78286 70550-01108

REVISION NR R   DTD 03/01/1995

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 78286 70550-01108

REVISION NR AK  DTD 07/29/2005

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 78286 70550-01108-107

REVISION NR     DTD 04/27/2012

PART PIECE NUMBER:

 

The anticipated destinations and anticipated quantity breakdowns are as follows: 53 each to be shipped to NEW CUMBERLAND PA 17070-5002;  The anticipated packaging requirements are as follow :

 

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001  PRES MTHD:41  CLNG/DRY:1  PRESV MAT:00

WRAP MAT:EA  CUSH/DUNN MAT:JC  CUSH/DUNN THKNESS:X

UNIT CONT:E5  OPI:M

INTRMDTE CONT:DO  INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

 

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

   

                                       

.

The solicitation is anticipated to require inspection of the supplies and packaging at destination. The NAICS code for this item is 334519. All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Ryan Gulick, at ryan.gulick@dla.mil on or before 08/24/2016.