Indicator fault LOC

Added: Jan 04, 2017 10:13 am Modified: Feb 17, 2017 3:15 pmTrack Changes  

Federal Business Opportunities (FedBizOpps) Synopsis Information Form

 

1.  ACTION CODE:  (X  ) P = Presolicitation   (   ) M = Modification to a Previous Presolicitation Notice

2.  CLASSIFICATION CODE: 6625

3.  NAICS CODE: 334519

4.  TITLE: INDICATOR FAULT LOC

5.  RESPONSE DATE: 4/10/2017

6.  PRIMARY POINT OF CONTACT: Ryan Gulick

7.  SECONDARY POINT OF CONTACT:

8.  SOLICITATION NUMBER: SPM7M2-16-R-0065

9.  DESCRIPTION:

                 NSN(s): 6625-01-455-3846

                 Item Description:

 INDICATOR,FAULT LOC

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

 

RA001: THIS DOCUMENT INCORPORATES TECHNICALAND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL ANDQUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS,THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

 

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERSAND

NON-MANUFACTURERS)

 RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

 RQ011: REMOVAL OF GOVERNMENTIDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RT001: MEASURING AND TEST EQUIPMENT 837

 RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY 829 DOCUMENTATION (AUG 2016)

 52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

 

FARCLAUSE 52.246-11 APPLIES.  A QUALITY MANAGEMENT PROGRAM MEETING THE

REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO9001:2008

(EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;

OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008

(EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE

OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHENHIGHER LEVEL QUALITY IS

REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES

WHICH CITE THE ENTIRE INTERNATIONALSTANDARD ARE INTERPRETED AS

EXCLUSIONS TO THIS DOCUMENT.

DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

 

4.1 Generalrequirements, [excluding reference to 1.2 and excluding NOTE

3 c)]

4.2.1 General, [excluding subparagraph a)]

4.2.2 Quality manual,[excluding subparagraph a)]

4.2.3 Control of documents

4.2.4 Control of records

5.1 Management commitment

5.3 Quality policy

6.2.2Competence, training and awareness

6.4 Work environment

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determinationof requirements related to the product

7.2.2 Review of requirements related to the product

7.2.3 Customer communication

7.3.7Control of design and development changes

7.4.1 Purchasing process

7.4.3 Verification of purchased product

7.5.1 Control ofproduction and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6Control of monitoring and measuring equipment

8.1 General, [excluding subparagraph b) and subparagraph c)]

8.2.2 Internalaudit

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventiveaction

 

*

*

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS,REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENTLAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURYOR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

*

THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE

(ODS) IN THE DESIGN, MANUFACTURING,TESTING,

CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM

UNDER ANY MILITARY OR FEDERAL SPECIFICATION,

STANDARD OR DRAWING REFERENCED IN THIS ITEM

DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE

WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS

OBTAINED.  THISPROHIBITION SUPERSEDES ALL

SPECIFICATION REQUIREMENTS BUT DOES NOT

ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.

THIS DOES NOTAPPLY TO COMMERCIAL ITEMS, AS

DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-

ONLY ITEMS.

*

NOTE:  THE CITED DRAWING IS A SOURCECONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED.  EVEN THOUGHSOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING.  OFFERORS WHOARE INTERESTED IN

QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THISTIME.

 

TELEDYNE CONTROLS, LLC DBA 98571 P/N 843591-3

 

IAW BASIC DRAWING NR 78286 70550-01108

REVISION NR R   DTD 03/12/2007

PARTPIECE NUMBER: 70550-01108-107

 

IAW REFERENCE DRAWING NR 78286 70550-01108

REVISION NR R   DTD 03/01/1995

PART PIECE NUMBER:

 

IAWREFERENCE DRAWING NR 78286 70550-01108

REVISION NR AK  DTD 07/29/2005

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 7828670550-01108-107

REVISION NR     DTD 04/27/2012

PART PIECE NUMBER:

  

Quantity : 200 approximately

 This solicitation will include an option and quantity ranges up to 200 units.

  Unit of Issue:  EA

Destination Information:
 INSPECTION AND ACCEPTANCE AT DESTINATION, FOB ORIGI N.

Delivery Schedule: 240 DAYS

 

All responsible sources may submit an offer/quote which shall be considered.

  One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979.

  All offers shall be in the English language and in U.S. dollars.

  All interested suppliers may submit an offer.

 Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice

 The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation. During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction. This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., "Offeror A"). By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction. An offeror's final auction price will be considered its final proposal revision. No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307.

 The solicitation will be available in FedBizOpps on its issue date of  3/8/2017.

 Specifications, plans or drawings are not available.

 This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data;  therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).  Approved sources are: Teledyne cage 98571 for part 843591-3.

While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.

 

 

 

 

 

 

 

 

 

Added: Jan 11, 2017 1:55 pm Modified: Feb 17, 2017 3:15 pmTrack Changes