Idaho Panhandle NF, Avery Warehouse Improvements Phase II & III

Added: Jan 10, 2017 6:36 pm Modified: Feb 03, 2017 12:12 pmTrack Changes

The remaining work in Avery Warehouse project consists of constructing Option Items 1 and 2 (see page 3 of 18 in the Architectural Drawings/Specifications, under Scope of Work). The Base Item work has been completed along with all the concrete work in Option Item 1. This is the final phase of the project.  Option Item 1 includes three parts: Part 1) Install a new SAW SHOP (room 109) approximately 338 square feet on existing foundation, power strips with outlets on four walls, 4 light fixtures, double 4' doors, 1 heater (match new ceiling heaters installed in Base Item; specifications modified stainless heaters to painted steel Dimplex/Electromode), 1 exhaust fan, and one 220 plug; Part 2) Install a new WILDLIFE STORAGE shed (room 113) approximately 221 square feet with 1 light fixture and power strip on four walls with four outlets, and double 3' doors; and Part 3) Install power strip on four walls of existing Work Out Room (room 110) with five outlets and three light fixtures.  All walls insulated to R-20 and ceilings to R-38 (batt insulation can be substituted for spray foam polyurethane and must meet or exceed R value noted in each location).  Option Item 2 includes one part: Part 1) Replace the 4 bay overhead doors with 2 large overhead insulated doors, install two steel beams and maintain the existing door height (see Beam Garage Door Clearance Clarification), and install 2 automatic garage door openers to operate the new overhead doors (drawings/specs incorrectly call for 4 garage door openers).  A formal site visit will NOT be scheduled when the solicitation is issued. Site visits may be arranged during normal duty hours by contacting:

Scott McIlhargey
Facility Operation Specialist
Phone: 208-245-6230 Avery, ID or 208-245-6030 St. Maries, ID
scottlmcilhargey@fs.fed.us

Added: Jan 10, 2017 6:36 pm

The St. Joe Ranger District of the Idaho Panhandle National Forests (IPNF) will solicit for the final phases (II & III) of Avery Warehouse Improvements. The project consists of installing a new saw shop approximately 338 square feet and matching the adjacent shed. Enclosing, insulating, and sheeting workout room adjacent to new saw shop. Installing power strips in one corner, 4 light fixtures, double 4' doors, 1 heater, 1 exhaust fan, and one 220 plug. Installing a new wildlife area shed approximately 221 square feet with 2 light fixtures and outlets on 4 walls. Installing double 3' doors, closing in the existing bays, and adding 3 outlets. Insulating all walls and ceilings. Installing 4 automatic garage door openers. Replacing the 4 bay overhead doors with 2 large overhead insulated doors and maintaining the existing door height. Providing 2 garage door openers to operate the new overhead door. The price range is between $25,000 and $100,000. Estimated start date is March, 2017 with completion in approximately 60 calendar days. Solicitation to be issued on or about January 30, 2017. A formal site visit will NOT be scheduled when the solicitation is issued. Site visits may be arranged during normal duty hours by contacting:

Scott McIlhargey
Facility Operation Specialist
Phone: 208-245-6230 Avery, ID or 208-245-6030 St. Maries, ID
scottlmcilhargey@fs.fed.us