Furnish and Install Submersible pumps and Control Panel

.

This solicitation has changed and brand name is no longer required. The required submersible pump specifications are in the updated statement of work and summarized below:
Two (02) centrifugal wastewater type pumps.
i. Pumps shall be non-clog, solids handling, submersible, wastewater type, and compatible with existing discharge piping
ii. Pumps shall produce 130 GPM at 40 feet TDH.
iii. Pumps shall be configured with guide shoe and hardware to allow for operation with existing guide rail system.
iv. Motors shall be 5 HP, three Phase, and 480 volts.
b. Replace control panel for automatic operation of duplex pumps.
i. Replacement Control panel design shall be similar to current installation and include: high water alarm light and horn mounted on panel, four mercury level control float switches and junction box (duplex Nema 4X)
ii. Control panel shall be designed to include the ability to operate pumps independently, in both manual operation and automatic operation modes.
iii. Control panel and conduit design shall be such that all control panel components will be protected from sewer gas and moisture intrusion.
iv. Conduit design and cable length shall include enough cable to provide a "service loop" for maintenance of pumps and float switches
.

This is a combined synopsis/solicitation prepared in accordance with the format in subpart 12.6 of the Federal Acquisition Regulation as supplemented with additional information included in this notice. This announcement constitutes only a solicitation. Proposals are requested and a written solicitation will not be issued.

The solicitation number is 70Z029-19-0-PNF112. This combined synopsis constitutes a solicitation and incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-97.

This is set-aside 100% for Small Business.
The NAICS code for this solicitation is 333996.
The contract type will be a firm fixed price purchase order awarded to the lowest price technically acceptable.

All prospective contractors must perform a site visit in order to familiarize themselves with the site conditions. A site visit can be scheduled by contacting Senior Chief Ian Helm (504)253-4566 or Chief Warrant Officer Sterling Davis (504)253-4513.

Submersible pumps and control panel must be energized and tested in the presence of Senior Chief Helm before work on site can be concluded.

This a brand name solicitation for two (02) Myers Pentair model WGX75HH-43 submersible pumps. No other brand name will be considered.
Prospective contractor will furnish and install the following:

Two (02) Myers Pentair model WGX75HH-43 submersible pumps with 2.5" discharge and 3/60/480V service. 7.5 HP Pump with 30' cords. Includes discharge guide shoe for mounting on existing rails.

One (01) Panel: Duplex, alternating control panel in NEMA 4X SS enclosure. Includes four (04) non-mercury float switches and mounting bracket for level control.

.