Flat Deck Barge
Awarded Award Notice Posted
- Solicitation number
- NNS16597828R
- Agency
- Stennis Space Center National Aeronautics and Space Administration
- Awarded
- to Sterling Shipyard LP
- Set-aside
- Total Small Business
Opportunity facts
- Contract number
- NNS17AA25C Federal contract award
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
Added: Sep 14, 2016 11:41 am
In addition to specification/requirements identified in the original posting for this synopsis, awardee will be required to submit the following information. More detail will be provided with the Request for Proposal (RFP). Anticipated release date of the RFP is on or about September 30, 2016
- General arrangement drawings to review.
- Design calculation for deck loading.
- Two (2) sets of As-Built drawings.
- Surface cleanliness to standards specified for all blasted cleaned surfaces, including
surface specified profile measurements.
- Inspection reports performed by Coating Representative which shall include but not limited
to: environmental conditions, abrasive blast cleaning, surface profile and coating
applications performed in accordance with the Manufacturer's recommendations.
- Sacrificial anode design including calculations, hull anode specification and dimensioned
drawings that show the location and layout of all anodes attached to hull.
- Two (2) complete sets of final construction drawings.
- Materials of construction and mill certificates.
Update #1 ·
Added: Sep 12, 2016 4:11 pm
The NASA/SSC Office of Procurement intends to issue a Request for Proposal (RFP) for the procurement of a new flat deck barge in accordance with the following specification/requirements:
LENGTH: 120'- 0" to 160'- 0" (molded)
BREATH: 30'- 0" to 35'- 0" (molded)
HULL DEPTH: 6'-11" - 8'- 0" (molded)
DECK TYPE: Flat (cargo), anti-slip with raised bow and stern
DECK PLATE: 3/8" (minimum)
SIDE PLATE: 3/8" (minimum)
BOTTOM PLATE: 3/8" (minimum)
DESIGN DECK LOAD: 2000 PSF (minimum)
DISPLACMENT: 120 long tons
HULL PROTECTION: One (1) 1" x 6" plate (Typical - Port & Starboard)
CARGO TIE DOWN RAILS: 4" Standard Pipe (Typical - Port & Starboard)
COMPARTMENTS: 6 (minimum)
MANHOLES: 8" x 24" (minimum) opening above each compartment with ladders to gain access into each compartment. Cover plates for manholes shall be flush with deck
BITTS: Double bitt (typical 4 places)
KEVEL CHOCK: 36" (typical 4 places)
ANODES: PORT & STARBOARD - Shall be 24 lb. magnesium type. Installed at 12 locations
BOW & STERN - shall be 5 each 22 lb. (barge will be continually used in brackish water)
VESSEL CLASSIFICATION: American Bureau of Shipping (ABS) Class "A1,
Barge, River Services, Reinforcement B"
The government intends to issue the RFP under Negotiated Acquisition of Commercial Items procedures in accordance with Federal Acquisition Regulation (FAR) Parts 12 and 15. Any resultant award will be made in the form of a Firm Fixed Price (FFP) Contract.
This competitive procurement will be set aside 100% for small business.
The NAICS Code and small business size standard for this procurement are 336611 and 1,250 employees, respectively.
The anticipated release date of the RFP is on or about September 30, 2016, with an anticipated proposal due date of on or about October 28, 2016. The firm date for receipt of proposals will be stated in the RFP.
The period of performance for this action is 180 days from date of award.
Evaluation and award of the solicitation will be best value. Evaluation factors are in development and will likely include Relevant Experience, Past Performance and Price. The Government reserves the exclusive right to award to other than the low offeror on this "Best Value" procurement.
The solicitation and related documents will only be issued electronically. These documents may be accessed and downloaded at the Federal Business Opportunities (FedBizOpps) website at www.fbo.gov. Offerors unable to access the solicitation at this address may contact the Contracting Office for assistance.
All questions regarding this acquisition shall be submitted in writing to the Contracting Officer at leanne.olson@nasa.gov. Telephone questions will not be accepted.
Offerors are responsible for monitoring this site for the release of the solicitation and any associated documentation or amendments. Offerors are responsible for downloading their own copy of the solicitation and any associated documentation or amendments.
An Ombudsman has been appointed. The installation Ombudsman is Mr. Ken Human at ken.r.human@nasa.gov or (228) 688-2123.
Attachments
| File | Type | Posted |
|---|---|---|
| NNS16597828R_Amendment_003.pdf | ||
| 31G00-G002_Rev__1.pdf | ||
| NNS16597828R_Amendment_0002.pdf | ||
| NNS16597828_Amendment_0001.pdf | ||
| Solicitation_NNS16597828R.pdf | ||
| Attachment_2_Solicitation_Provisions.pdf | ||
| Attachment_3_Past_Perf_Form.doc | DOC document | |
| Attachment_1_Specification__31G00-G002.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity