Engines, Turbines, and Components

Awarded Award Notice Posted

Solicitation number
FA8122-13-R-0030
Agency
AFLCMC Tinker AFB Lifecycle Management Center, Department of Defense
Awarded
to Chromalloy Component Services Inc.
Set-aside
No set-aside

Opportunity facts

Contract number
FA8122-14-D-0005 Federal IDV award
NAICS code
336412 Aircraft Engine and Engine Parts Manufacturing
PSC
Not on record

Notice details come from SAM.gov. Updated .

Notice text

3 versions

Update #3 · Latest ·

Added: Oct 23, 2013 2:18 pm Amendment FA8122-13-R-0030-02

The purpose of this amendment is to address questions/comments.


FIRST: Questions were received for solicitation FA8122-13-R-0030. The
responses to the questions are as follows:


Q1: Is there any way that info can be published describing the general
condition of these cases?


A1: The most probable repair will be to replace the OGV spad due to FOD
damage. The case is pretty durable and usually is serviceable when it is
removed from the engine. However the OGV's can get damaged when
metco liberation occurs. The repair source should anticipate other
repairs since we cannot predict what damage is going to occur in
operation.


Q2: Are Scrap Assemblies to be considered as out of Scope / over and
above?


A2: The Statement of Work paragraph 1.8, gives instructions on condemned
assets. There will not be an over and above CLIN on this contract.


Q3: SB72-0525 indicates certain S/N of Assemblies no longer fit for use, this
being said can it be excluded.


A3: The repair source must follow SB 72-0525 and make sure that none of the
Serial #'s received match any of the serial #'s in the SB. If a case listed in
this SB, the Contractor shall contact the Contracting Officer that it will be
scrapped in accordance with SB 72-0575.


Q4: SB 72-0604 is very expensive and without an accurate picture of the
Customer fleet it will be difficult to price, can this SB be excluded and
charged as over and above.


A4: Contractor shall inform the Contracting Officer when SB 72-0604 is
applicable and an equitable adjustment may be negotiated if necessary.


SECOND: The solicitation closing date is hereby extended as follows:


FROM: 31 Oct 2013 at 3:00 PM CST


TO: 8 Nov 2013 at 3:00 PM CST


THIRD: All other terms and conditions remain unchanged.


 

Update #2 ·

Added: Sep 06, 2013 10:01 am The purpose of this amendment is to revise the Estimated Issue Date, Estimated Closing/Response Date, Estimated Award Date and to change the Classification Code as follows:

FIRST: The Estimated Issue Date is changed as follows:


From: 29 July 2013
To: 18 September 2013


SECOND: The Estimated Closing/Response Date is changed as follows:


From: 03 September 2013
To: 18 October 2013



THIRD: The Estimated Award Date is changed as follows:


From: 30 September 2013
To: 15 November 2013


FOURTH: The Classification Code is changed as follows:


From: J028
To: 2840


FIFTH: All other terms and conditions remain unchanged and in full force and effect.

Update #1 ·

Added: Jul 11, 2013 4:14 pm 1. Estimated issue date and estimated closing/response date issued 29 July 2013,Closes 03 September 2013

2. Anticipated Award Date - 30 September 2013


3. RFP# - FA8122-13-R-0030


4. PR# - FD2030-13-00853


5. Nomenclature/Noun -F108 Module 8 Combustion Chamber Case


6. NSN - 2840-01-262-0495PN


7. PN - 9523M17G13/G15, 9529M99G04/G08/G09, 1359M77G03/G05, 9523M17G10 and 9529M99G02


8. Classification Code - J028


9. Application (Engine or Aircraft) - F108


10. AMC - R1/C


11. History - FA8121-09-D-0002


12. Description:


The F108 Module 8 Combustion Chamber Case provides the structural interface, transmits the engine axial load, and provides gas flow path between the compressor and LPT. The case is approximately 17.5" in diameter and made of Inconel 718.


A Commercial, Firm-Fixed Price, Requirements-type contract is contemplated and will be solicited as one basic year and four one-year option periods.


L/I 0001 - Remanufacture - F108 Module 8 CDN Case
Basic Year BEQ: 12 ea


L/I 1001 - Remanufacture - F108 Module 8 CDN Case
Option Year I BEQ: 10 ea



L/I 2001 - Remanufacture - F108 Module 8 CDN Case
Option Year II BEQ: 11 ea


L/I 3001 - Remanufacture - F108 Module 8 CDN Case
Option Year III BEQ: 8 ea


L/I 4001 - Remanufacture - F108 Module 8 CDN Case
Option Year IV BEQ: 9 ea


L/I 0002 - Over & Above - 1 Lot


L/I 0003 - Data Item - 1 Lot


Current Approved Sources:
Chromalloy Component Services Inc - CAGE: 1LKE9
GEES - CAGE: 062W2


13. Destination: SW3211, Tinker AFB, OK 73145-9013


14. Delivery: Required Delivery - 2 each per month beginning 30 days ARO
15. Qualification Requirements (QRs): QRs are available for this part number and data is available upon request. There are approved sources at this time. Award will be made only if the offeror meets QRs in accordance with FAR clause 52.209-1. Qualification information can be obtained from: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009


16. Mandatory Language: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.


All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.


17. Keri Sampson, (405) 734-4633, keri.sampson@tinker.af.mil

Attachments

Files attached to this notice, newest first
File Type Posted
FA8122-13-R-0030-0002.pdf PDF
SOW_10Oct13.docx DOCX document
FA812213R0030_______0001.pdf PDF
FA812213R0030_Special_pkg.docx DOCX document
FA812213R0030_Vendor_Pack.pdf PDF
FA812213R0030.RTF RTF text file
FA812213R0030_Packaging.pdf PDF
FA812213R0030_SOW.pdf PDF
FA812213R0030_Safety_Specifications.docx DOCX document
FA812213R0030_Vendor_Trans.docx DOCX document
FA812213R0030_Transportation.pdf PDF
FA812213R0030_CDRL.pdf PDF
FA812213R0030_CAV_SOW.docx DOCX document
Show all 13

On GovTribe

Work this opportunity on GovTribe

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity