Elastomeric Seals for Miter and Tainter Gates

The U.S. Army Corps of Engineers - St. Paul District seeks a contractor to supply a replacement miter gate seal for Lock & Dam 5A, and tainter gate seals for Lock & Dam 2, in addition to spare seals. 

Item              Part Name                                   Part Number        Description          Length (ft)      Qty        

0001             Miter Gate Quoin Seal                 L5A-21/202-L          SU Mold 4814         33                  2 

0002         Custom Miter Gate Quoin Seal           None                     NEW                       27                 1

0003         Custom Miter Gate Quoin Seal           None                     NEW                       33                 2

0004         Tainter Gate Side Seal                      M-L2-48-20/20.6      NEW                      24                 22

Elastomeric seal descriptions are Seal’s Unlimited brand standard molds which are currently installed at the locks on the Upper Mississippi River. Other seals with matching dimensions shall be acceptable. Seals shall be accepted in raw stock lengths, with simple traverse end cuts. Bolt holes will be drilled by Government personnel.

 Please see images and full specifications in SOW posted to SAM.gov. 

Seals shall be delivered to the USACE Fountain City, Wisconsin Service Base no later than June 1, 2024.

This is a 100% Small Business Set-Aside solicitation.
NAICS Code: 339991
Size Standard: 600 employees

Please include the manufacturer, model numbers, and specifications of all supplies your firm is quoting, to ensure that they fully meet specifications. Please include the Country of Origin for all supplies offered.

OFFEROR SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections with the NAICS code applicable to the solicitation.
For assistance with SAM, contact information is below:
SAM by GSA
Hours of Operation: Monday – Friday 8am to 8pm ET,
U.S. Calls 866-606-8220,
Service desk website: http://www.fsd.gov/

Quotes received after the deadline are considered late, and may not be considered for award.

 The seals shall meet all SOW requirements, which include (but are not limited to):

• Seals shall be natural rubber/polyisoprene or neoprene.
• Seals shall be molded.
• Quoin seals shall have ASTM A36 3/8” x 4” steel reinforcement plates molded into the legs of the seal running continuously along the length of the entire seal. All edges to have 1/8” radius on all edges.
• Seals shall not contain reclaimed polymers and shall include reinforcing carbon black, zinc oxide, accelerators, antioxidants, vulcanizing agents and plastizer.