El Paso Drilling
Closed Solicitation Posted
- Solicitation number
- 6973GH-22-R-00110
- Agency
- Franchise Acquisition Servies Federal Aviation Administration, Department of Transportation
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 238990 All Other Specialty Trade Contractors
- Place of performance
- El Paso, Texas, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation from the Department of Transportation Federal Aviation Administration Franchise Acquisition Services seeks geophysical surveying and mapping services including cone penetration testing, deployment of various geophysical surveying technologies, drilling up to twenty-five uncased twenty-four-inch diameter boreholes and two lined forty-two-inch diameter boreholes up to one-hundred feet deep, and provision of earth-moving equipment. The contractor must perform ten CPTs to depths of one-hundred feet, deploy magnetometer and electrical resistivity sensors or a probe-based camera to record subsurface data as a function of depth, and deliver all location-tagged data to sub-centimeter GPS accuracy upon completion by May 13, 2022.
There is no set-aside designation. The work will be performed in El Paso, Texas and includes ten CPTs, twenty-five uncased 24-inch boreholes, two lined 42-inch boreholes all to depths of 100 feet. Prevailing wage rates apply. The contractor must follow all safety and security requirements and provide deliverables such as daily reports and waste disposal documents over the approximate twelve-month performance period.
Notice text
The United States Border Patrol (USBP) requires geophysical surveying and mapping services to perform cone penetration testing (CPT) (or acceptable substitute), deploy a variety of geophysical surveying technologies, drill up to twenty-five (25) uncased twenty-four-inch (24”) diameter boreholes up to one-hundred-feet (100’) deep, drill up to two lined forty-two-inch (42”) diameter boreholes up to one-hundred- feet (100’) deep, and provide earth-moving equipment to manage the drilling spoils and aid with geophysical surveying. The work will be completed at specific locations as directed by DHS personnel within the El Paso, TX Port of Entry area.
The Contractor shall perform ten (10) CPTs to a depth of one-hundred (100’) feet at specific locations as indicated by USBP/CBP representative. The contractor shall deploy magnetometer based sensors, electrical resistivity sensors or a probe based camera at the direction of USBP/CBP representative to record data as a function of depth. All recorded data along with locations of each test to sub-centimeter accuracy GPS coordinates shall be delivered at completion of project.
Attachments
| File | Type | Posted |
|---|---|---|
| 16 Attachment 3 Contractor Release Form.doc | DOC document | |
| 16 6973GH-22-R-00110.pdf | ||
| 16 Attachment 6 Past Experience Form.docx | DOCX document | |
| 16 Attachment 5 Performance Bond.pdf | ||
| 16 Attachment 1 Statement of Work.pdf | ||
| 16 Attachment 4 Payment Bond.pdf | ||
| 16 Attachment 2 WD.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity