CNC Cylindrical Grinder
Awarded Award Notice Posted
- Solicitation number
- BEP-RFP-16-0478
- Agency
- Office of the Comptroller of the Currency Department of the Treasury
- Awarded
- to Reinen Machine Sales, Inc.
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- TEPS1634777 Federal contract award
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- Not on record
- Place of performance
- BEP Washington, DC facility: Bureau of Engraving and Printing Attn: To-be-completed upon award BM- 5 D Street, Between 13th & 14th Streets, S.W. Washington, District of Columbia 20228, United States
Notice details come from SAM.gov. Updated .
Notice text
4 versions
Update #4 · Latest ·
Added: Sep 23, 2016 2:12 pm
This amendment clarifies questions #4 and #5 that were addressed in the previous amendment.
4. There are two roll-up doors inside the Plating Room Division.
Roll-up door #1: From the outside, one would access door #1 from the parking level. The parking level wall cannot be removed to allow a crane to access the roll-up door behind the window in the building.
Roll-up door #2: From the outside, one would access door #2 via the alleyway between the BEP and the Holocaust Museum.
5. Is there a drawing available for the freight elevator, with the safety specifications for loading?
Response: The correct freight elevator is #10, which is located across from the Plating Room Division. The freight elevator specs are:
Door Opening - Width 6'6" and Height 6"11"
Floor Metal Bumpers - Width 9'5" x Dimension 7'4"
Elevator - Width 10'1" x D 8'2" x H 7'8 1/2" less 3" for side wood bumpers
Weight Capacity - 15,000lbs
Update #3 ·
Added: Sep 19, 2016 5:10 pm
The purpose of this requirement is to procure a CNC Grinder for the Bureau of Engraving and Printing (BEP). See attached Solicitation document and Statement of Work for more details.
Please pay close attention to the dates for the final round of questions, as well as the close date for the requirement as outlined in the solicitation.
Update #2 ·
Added: Aug 30, 2016 4:16 pm This amendment corrects the set aside. Requirement will be unrestricted (full and open).
Update #1 ·
Added: Aug 29, 2016 1:23 pm
The Bureau of Engraving and Printing (BEP) has a requirement for a new CNC Grinder.
A site visit will be held at the Washington, DC Currency Facility. Interested vendors are encouraged to attend. Attached is the Statement of Work. The SOW is provided for your review. The BEP anticipates releasing the official Request for Proposal shortly after the site visit.
Note: An award is anticipated by 30 September 2016.
FAR 52.237-1 SITE VISIT ( APR 1984) Offerors are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award. (End of provision)
Due to the nature and space restriction of this requirement, offerors are encouraged to attend the site visit. The purpose of the site visit is for interested offerors to familiarize themselves with the tasks at hand and verify all measurements. The site visit will be conducted for all interested vendors at 1:00 pm EST on Thursday, September 8, 2016.
Interested vendors who are confirmed for the visit shall meet at the Bureau of Engraving and Printing Washington, DC Currency Facility located at 14th & C Street, S.W. Washington, DC 20228 entrance no later than 30 minutes prior to the start of the visit. This entrance is located across the street from the BEP Tour Entrance which is located next to the Holocaust Museum.
Parking will NOT be provided for this site visit. All interested vendors attending the site visit will need to forward your name and company information to Gladys.wilks@bep.gov no later than 12:00 pm EST Wednesday, September 7, 2016.
Attachments
| File | Type | Posted |
|---|---|---|
| CNC_Grinder_Q A.pdf | ||
| BEP-RFP-16-0478_CNC_Grinder_Solicitation_(Sept-21-16)_Amended.pdf | ||
| CNC_Grinder_SOW_(9.19.16).pdf | ||
| BEP-RFP-16-0478_CNC_Grinder_Solicitation_(Sept-19-16).pdf | ||
| Site_Visit_Sign-In_List.pdf | ||
| CNC_Grinder_SOW_(8.29.16).pdf | ||
| 75D-07.0-04_EHS_Contractor_Requirements.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity