CM22033001, 4330--filter parts kit

This requirement is for NSN 4330-01-125-5432. This NSN has an estimated annual demand of 2,387 kits.

This acquisition is for a Fixed Price, Indefinite Quantity Contract (IQC). FAR Part 15 – Contracting by Negotiation. The proposed procurement contains a one-year (1-year) base period plus two (2) option years. The total contract period shall not exceed 3 years. Award will be made on an ALL OR NONE BASIS per NSN for items supplied covered under this contract.

Copies of the solicitation is available at the https://www.dibbs.bsm.dla.mil/RFP/ and available approximately 15 days after this notice is published in SAM.gov.

The approved source is Pall Aeropower (18380), part number AA-9718E-25KF1.

This solicitation is UNRESTRICTED. All offers shall be in the English language and in US dollars.

The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation.

The solicitation shall be available in DIBBS on or about March 22, 2022. All responsible sources may submit an offer/quote which shall be considered.

(X) PART NUMBER: Specifications, plans, or drawings related to the procurement described are not available and cannot be furnished by the Government.

(X) 12 Trade Agreements Acts

(X) 22 Sole Source (FAR 6.302)

(X) 26 Commercial Notice (when the Government does not intend to use Part 12, Commercial Acquisition Procedures)(FAR 5.206(e)(4))

(X) Unrestricted

(X) The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation.

-
*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:011255432

     PARTS KIT, FLUID PRESSURE FILTER.
     REFERENCE NUMBER:RP001
     REFERENCE NUMBER:RA001
     REFERENCE NUMBER:RQ011

     REFERENCE NUMBER:RQ009
     REFERENCE NUMBER:RC001

     REFERENCE NUMBER:A0003

     REFERENCE NUMBER:ZD080
     REFERENCE NUMBER:RD002
     REFERENCE NUMBER:CA060

     REFERENCE NUMBER:CS187
     REFERENCE NUMBER:RQ002
     REFERENCE NUMBER:CS241
     KIT CONSISTS OF 1 EA  2945-01-125-5432 FILTER ELEMENT, AND 2 EA
     M83248/1-022 PACKING PREFORM(O-RING). O-RINGS ARE TO BE LIGHTLY
     LUBRICATED WITH MIL-L-7808 OIL PRIOR TO BEING PLACED AND SEALED IN
     PLASTIC BAG. END ITEM 2840-01-070-1003, T700-GE-700
     REFERENCE NUMBER:ZQA06

     CRITICAL APPLICATION ITEM

     PALL AEROPOWER CORPORATION 18350 P/N AA-9718E-25KF1

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
     QUP:001  PRES MTHD:ZZ  CLNG/DRY:1  PRESV MAT:00
     WRAP MAT:ZZ  CUSH/DUNN MAT:ZZ  CUSH/DUNN THKNESS:Z
     UNIT CONT:ZZ  OPI:M
     PACK CODE:U
     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
     SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

     PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
      REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER:ZD037

     REFERENCE NUMBER:CS284

************************************************************************************************************

                                                    GLOSSARY

************************************************************************************************************
PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER RA001

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ011

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

     REFERENCE NUMBER RQ009

     RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

     REFERENCE NUMBER RC001

     RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

     REFERENCE NUMBER A0003

     MIL-STD-130N(1) DATED 16 NOV 2012.
     IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

     REFERENCE NUMBER ZD080

     SAMPLING:
     THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
     H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
     SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
     STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
     AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
     VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
     ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
     SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
     MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
     PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
     SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
     UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

     REFERENCE NUMBER RD002

     RD002, COVERED DEFENSE INFORMATION APPLIES

     REFERENCE NUMBER CA060

     NO DATA IS AVAILABLE.  THE ALTERNATE OFFEROR IS
     REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
     INCLUDING DATA FOR THE APPROVED AND ALTERNATE
     PART FOR EVALUATION.

     REFERENCE NUMBER CS187

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
     USED NOR INCORPORATED IN ANY ITEMS TO BE
     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
     SPECIFICATION REQUIREMENTS.

     REFERENCE NUMBER RQ002

     RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

     REFERENCE NUMBER CS241

     NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
     REQUIRES ENGINEERING SOURCE APPROVAL BY THE
     GOVERNMENT DESIGN CONTROL ACTIVITY.

     REFERENCE NUMBER ZQA06

     THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY
     ITEM (CSI).
     .
     ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
     FORWARDED TO THE DSC CONTRACTING OFFICER
     FOR REVIEW AND APPROVAL.
     .
     ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
     MIL-STD-129.  IN ADDITION, EACH UNIT PACK WILL
     BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE)<(>,<)>
     CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
     CAGE CODE AND PART NUMBER.

     REFERENCE NUMBER ZD037

     COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN
     ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W
     MIL-STD-129.

     PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT
     TO PREVENT DAMAGE TO CONTENTS OF KIT.  IF ONE BOX IS INSUFFICENT, ENSURE
     THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT
     (THAT IS, 1 OF 2, 2 OF 2, ETC.)

     CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE
     OF CONTENTS.  EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS
     WITHIN THE KIT.

     REFERENCE NUMBER CS284

     EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,
     CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE
     CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.