Cap, screw

Added: Mar 28, 2018 3:06 pm CAP, SCREW

 

OQE Ordering Requirement For CIM

 Provide written verification that the chemical and mechanical properties have been determined and are acceptable for all document(s) in this package, as follows:N42158-8060-B304 thru

8060-B308, N42158-8060-B309 thru 8060-B315, N42158-8060-B316 thru 8060-B321 and

N42158-8060-B322 thru 8060-B328.

 (a) Provide written verification that the chemical analysis and mechanical properties tests have been determined and are acceptable. All test reports will contain a signed certification that the results represent the actual values for the material provided and that they are in full compliance with the contract specification. Material certification data shall be recorded on the testing company's letterhead and shall bear the name, title and signature of the authorized company representative. The name and title shall be clearly legible.  Certification data supplied to the government shall be either the original mill material certification, the original copy from the testing facility, or exact photocopies of these documents. The data forwarded by the manufacturer shall contain a signed certification that the reported results represent the actual attributes of the material furnished and indicate full compliance with all applicable specification and contract requirements.  Statements on material certification documents must be positive and unqualified. The material certification data reports shall include quantitative data representing the actual values obtained during testing.

 (b) Test reports will list all verified attributes and will be traceable to the material via a heat, lot, or batch number applied to the material by the manufacturer. Each piece of material must be marked with the applicable heat, lot, or batch number shown on the test reports provided.

 (c) Test reports labeled "Typical," those with words such as "to the best of our knowledge" or "we believe the information contained herein is true" or those that have results transcribed from other reports or documents are not acceptable.

 (d) Certify that a slow strain tensile (SSRT) test of "start material" has been accomplished per QQ-N-N286 requirements.

 Note 1: Enter the specification

 Note 2: Enter the document number