Bldg. 2 and Hangar 7 Electrical Upgrades
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- PANNGB-20-P-0000-009923
- Agency
- New York National Guard Army National Guard, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 238210 Electrical Contractors and Other Wiring Installation Contractors
- Place of performance
- Schenectady NY 12302 USA
Notice details come from SAM.gov. Updated .
Notice text
The 109th Airlift Wing Base Contracting Office, Stratton Air National Guard Base, Scotia, NY 12302 intends to award a firm fixed price contract to replace Building 2 Switchgear, located here at the base. The general scope of work is below. Work will be conducted in strict accordance with contract and all applicable Federal, State, and local laws, regulations, codes, and directives. Estimated Construction Range: Between $25,000 and $100,000. This procurement will be 100% set aside for small business concerns. North American Industrial Classification System (NAICS) Code applicable to this acquisition is 238210. Small Business Size Standard for this acquisition is $16,500,000.
BUILDING 2 SWITCH GEAR
The Contractor shall provide all construction services and materials to replace the existing 120/208 volt 3 phase; 4 wire 800 amp electrical switch gear equipped with an 800 main breaker, located in Building 2. Switch gear that is currently in place is manufactured by Federal Pacific. The switch gear powers the main hangar (Hangar 1), along with all of Building 2 and Building 12. New switch gear must be equivalent or superior in performance and capacity to the current configuration.
Photos will be available with solicitation.
OPTION #1 – HANGAR 7 FREQUENCY CONVERTER
In addition, Contractor shall provide all construction services and materials to replace the existing precision frequency converter in Hangar 7. Existing frequency converter is 90 kVA, 400 Hz equipment manufactured by FCX Systems, Model #PFC072-V-40-FM.
New frequency converter must be equivalent, or superior in performance and capacity compared to the existing converter. Converter manufacturer, design and model number must be approved by the COR prior to purchase and installation.
Codes and Standards:
Purchase and installation of the frequency converter must be compliant with the following codes: a. UFGS 26 35 43; b. MIL-STD-704F; c. NFPA 70
The project will begin 14 days following the Notice to Proceed and completed within 6 months including lead time required for equipment ordering.
This is not a solicitation for quotes; solicitation will be posted after April 22, 2020. Date and time for site visit will be set up at that time.
Send any email inquiries directly to the Contracting Officer, Wanda Yarbor at wanda.d.yarbor.mil@mail.mil
Notice history
| Notice | Type | Posted |
|---|---|---|
| Bldg. 2 and Hangar 7 Electrical Upgrades | Award Notice | |
| Bldg. 2 and Hangar 7 Electrical Upgrades | Solicitation | |
| Bldg. 2 and Hangar 7 Electrical Upgrades | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity