Base wide Water Meters

Added: Nov 09, 2016 5:25 pm The design build contractor shall provide and install water conserving fixtures throughout the

installation in accordance with Figure 1 and Figure 2 – Water Fixture Inventories. This project

shall reduce water use by replacing all standard plumbing fixtures with appropriate equivalent

water conserving fixtures including toilets, urinals, lavatory and kitchen faucet aerators, and

showerheads. This project serves to meet DoN Water Goals for reduced consumption. A single

fixture product line for all buildings is sought to ensure ease of maintenance and uniformity.

Color shall be silver or match existing fixture.

All fixtures purchased and installed will be WaterSense labeled.

Toliets will be high efficiency type, 1.28 gallons per flush or less with dual flush technology.

Urinals will be one pint per flush.

Waterless type will not be accepted.

Lavatory faucet aerators will have a flowrate of 0.5 gallons per minute.

Kitchen faucet aerators will have a flowrate of 1.5 gallons per minute.

Showerheads will have a flowrate of 1.5 gallons per minute for General Water Fixture Inventory,

Figure 1.

Showerheads will have a flowrate of 2 gallons per minute for NGIS Water Fixture Inventory,

Figure 2.