Submit a qoute to privide. Install. And maintain a 1GB ethernet service at 1 GB from 310 eagle way dover AFB, DE 19902 to 700 robbins street philadelphia, PA 19111.

Added: Mar 05, 2018 5:08 pm Modified: Jul 23, 2018 3:57 pmTrack Changes PURPOSE OF AMEND 0002 IS AS FOLLOWS: 1. ADD ETHERNET FRAME SIZE WILL BE CONFIGURED TO SUPPORT MAXIMUM TRANSMISSION UNIT (PHYSICAL MTU) OF 9100 OCTETS (BYTES) JUMBO FRAMES. 2. UPDATE TESTING REQUIREMENTS FOR JUMBO FRAMING. 3. CHANGE THE QUOTE DUE DATE TO 13 AUG 18 TO ALLOW FOR QUOTES. 4. CHANGE THE SERVICE DATE TO 24 NOV 18. 5. ALL CONTRACTORS THAT PREVIOUSLY SUBMITTED QUOTES MUST SUBMIT NEW REFRESHED QUOTES.

Added: Mar 05, 2018 5:08 pm Modified: May 03, 2018 2:59 pmTrack Changes CHANGE CIRCUIT REQUIREMENT TO READ; "START A COMMERCIAL LEASE USING THE IQO CONTRACT BETWEEN IN BLDG 310 RM 101; 310 EAGLE WAY DOVER AFB, DE 19902 AND BLDG 9800 RM M2AB104; 9800 SAVAGE ROAD, FT GEORGE G MEADE, MD 20755-6000". A. (1.0GBE) WILL REQUIRE VENDOR TO DELIVER 1.0GB ETHERNET INTERFACE (OPITCAL HANDOFF-1000BASE-LX-SINGLE MODE FIBER) AT THE DROP SIDE OF THE COMMERCIAL DEMARC'S AT THE "A" AND "Z" LOCATIONS. B. VENDOR IS RESPONSIBLE FOR INSTALLATION AND MAINTENANCE OF THE SERVICE FROM THE LINE SIDE OF THE DISA IE1 PROVIDED FIBER TERMINATING PATCH PANEL INSTALLED IN THE JUNIPER MX-240 ROUTER SUITE (UJEWDOV030) BLDG 310, ROOM 101 TO THE DROP SIDE OF THE COMMERCIAL FIBER POINT OF PRESENCE FIBER DISTRIBUTION PANEL BLDG 310, ROOM 101 USING SINGLE MODE FIBER. COORDINATE TYPE CONNECTORS TO BE USED FOR TERMINATION TO THE DISA PROVIDED PATCH PANEL. C. SEE UNIQUE INSTALL FACTORS AND ATTACHMENTS 2. ESTABLISH NEW QUOTE DUE DATE OF 4 JUN 18.

Added: Mar 05, 2018 5:08 pm SUBMIT A QOUTE TO PRIVIDE. INSTALL. AND MAINTAIN A 1GB ETHERNET SERVICE AT 1 GB FROM 310 EAGLE WAY DOVER AFB, DE 19902 TO 700 ROBBINS STREET PHILADELPHIA, PA 19111.This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a request for quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. The provisions that apply to this acquisition are identified in the DITCO Basic Agreements and Section M of the attached document. The associated North American Industrial Classification System (NAICS) code for this procurement is 517110 with a small business size standard of 1500. All quoted prices shall be identified in CLIN 0001 and applicable SLINs 0001AA, 0001AB, etc as applicable for monthly recurring charges and CLIN 0002 and applicable SLINs 0002AA, 0002AB, etc as applicable for non-recurring charges. CLIN/SLINs shall include item descriptions, quantities and units of measure. The requested service date and acceptance criteria are outlined in the attached inquiry. The product and service code for this telecommunications requirement is D304. The selected company must comply with the following commercial item terms and conditions, which are incorporated herein by reference and as outlined in existing basic agreements: FAR 52.212-1, Instructions to Offerors, Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications Commercial Items the selected offeror must submit a completed copy of the listed representations and certifications if there is no existing basic agreement; FAR 52.212-4, Contract Terms and Conditions Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the selected clauses in paragraph (b) in the existing basic agreement. Quotes are due 4 APR 18, by 4:00PM (CDT) at DITCO Scott AFB, IL 62225-5406 Point of Contact(s): KEVIN KNOWLES, 618-229-9527, kevin.l.knowles4.civ@mail.mil