1. 85mm Electronic Calibration Module
Closed Solicitation Posted
- Solicitation number
- NB672010-25-01851
- Agency
- National Institute of Standards and Technology Department of Commerce
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334516 Analytical Laboratory Instrument Manufacturing
- Place of performance
- United States
- Points of contact
-
- Clifford Nicholson clifford.nicholson@nist.gov (303) 497-5185
- Daniel Kent daniel.kent@nist.gov (303) 497-6533
Notice details come from SAM.gov. Updated .
About this opportunity
The National Institute of Standards and Technology (NIST) is procuring a single Keysight 1.85mm Electronic Calibration Module through solicitation NB672010-25-01851, a combined synopsis/solicitation conducted under FAR 12.6 and 13.106. The module is required for NIST's Communications Technology Laboratory's Radio Frequency Technology Division to calibrate their existing Keysight large signal vector network analyzer covering DC to 67 GHz frequency range, supporting critical failure analysis and hardware security research on communications components and semiconductor devices under high-power conditions. The procurement specifies that only new equipment will be considered, with no used, refurbished, prototype, or remanufactured items eligible for award. The government will evaluate quotations on a lowest price technically acceptable basis, focusing on technical capability and price reasonableness. Quotations are due August 11, 2025, with questions accepted up to five calendar days after the solicitation's issuance date of July 30, 2025.
This procurement is conducted on an unrestricted basis with no set-aside designation, making it open to all qualified offerors under NAICS code 334516 (Analytical Laboratory Instrument Manufacturing) with a size standard of 1,000 employees. While specific contract values are not disclosed in the solicitation, offerors must provide firm fixed price quotations for the single electronic calibration module. The equipment must be delivered to NIST's Boulder, Colorado campus by September 31, 2025, with inspection and acceptance occurring within seven days of receipt. The brand name justification indicates this is a sole-source procurement specifically requiring Keysight equipment to maintain compatibility with existing systems and prevent potential research delays or equipment damage. Contractors must maintain active System for Award Management (SAM) registration and complete required representations and certifications to be eligible for award consideration.
Notice text
THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS OR SERVICES PREPARED IN ACCORDANCE WITH THE FORMAT IN SUBPART 12.6, AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED.
Solicitation number NB672010-25-01851 is a Combined Synopsis/Solicitation request for quote (RFQ) conducted under FAR 12.6 and 13.106. Procedures from FAR 15 will not be used. Please acknowledge receipt of this RFQ.
This RFQ, incorporated provisions, and clauses are those in effect through Federal Acquisition Circular (FAC) 2025-04. The associated NAICS is 334516 – Analytical Laboratory Instrument Manufacturing with a size standard of 1000 employees. This requirement is solicited on an unrestricted basis.
Attached are the Specifications describing the requirements for solicitation NB672010-25-01851 for the following line-item number(s) (CLINs) to include a description of the item(s), quantities, and units of measure (including any applicable option(s)).
All offerors shall provide a firm fixed price (FFP) quotation for the following line items: (All equipment must be new. Used, refurbished, prototype, or remanufactured will not be considered for award).
Item Number Supplies/Services Description QTY Unit of Issue Unit Price Amount
0001 BRAND NAME Keysight 1.85mm 1 EA $ $
Electronic Calibration Module
Total Value: $ $
This shall be provided in accordance with the Specifications Document attached herein.
A Description of the requirements for the items to be acquired are in the attached Requirements/Specifications document.
Attachments
| File | Type | Posted |
|---|---|---|
| Atch 2 - Brand Name Justification.pdf | ||
| RFQ NB672010-25-01851 Electronic Calibration Module.pdf | ||
| Atch 1 - Specifications.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| 1. 85mm Electronic Calibration Module | Solicitation | |
| SOURCES SOUGHT - 1. 85mm Electronic Calibration Module | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity