A07_Solicitation_AMD_003_B.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

W91CRB

ACC-APG - DIVISION D (W91CRB)

6515 INTEGRITY COURT

APG, MD 21005-3013

TIANNA WOODS

EMAIL: TIANNA.WOODS.CIV@MAIL.MIL

W91CRB-18-Q-5007

2018MAY01

X

X 2018MAY24 10:00am

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 5

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: TIANNA WOODS

Buyer Office Symbol/Telephone Number: CCAP-CCD/(410)278-0887

Type of Contract 1: Firm Fixed Price

Type of Contract 2: Cost No Fee

Kind of Contract: Other

*** End of Narrative A0000 ***

A. This amendment changes to section 3.1.2 of the Statement of Work, changes the closing date and answers question(s) asked:

Question No. 1: In regards to the EMC VNXe 3200, can you clarify the details and specifications for the Server such as CPU, memory, disk space, etc?

Answer: Pleas see Statement of Work Section 3.1.2.

B. This amendment changes the closing date and time to Thursday May 24, 2018 10:00 a.m. Eastern.

C. All responses should be submitted to Tianna Woods as Contract Specialist and Primary POC at tianna.woods.civ@mail.mil and copy

Elizabeth Nordell as contracting officer and secondary POC at elizabeth.m.nordell.civ@mail.mil.

*** END OF NARRATIVE A0003 ***

2 5

W91CRB-18-Q-5007 0003

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

STATEMENT OF WORK:

1.0 Scope. This document defines the requirements to deliver IT equipment as described under Paragraph 3 for Foreign Military Sales

(FMS) case AM-B-UBK (AE18027). This is a procurement for Armenia through the US Army FMS process. The word Government in this document refers to the United States Government. The word Country in this document refers to the FMS Customer.

2.0 Applicable Documents.

2.1 Military and Federal Specifications

MIL-STD-130N Identification Marking of U.S. Military Property

MIL-STD-129R Military Markings for Shipment and Storage

2.2 Commercial, Contractor and Government Approved Documents

International Standard for Number15 Guides for Regulating Wood Packaging Material

Phytosanitary Measures in International Trade w/ Mood to Amex I 2006

Standard Practice For

Commercial Packaging ASTM D 3951-10

3.0 Requirements. The contractor shall provide the following, or equivalent items meeting or exceeding the described characteristics, including that all items must be for European power supply (Armenia):

3.1.1 Quantity one (1) Cisco UCS C240 M4 Rack Server or equivalent:

a.Must meet or exceed: 2x Intel Xeon E5-2660 v2 (10 cores, 2.20GHz, 25MB cache); 2U rack rail kit; 2x650W pwr supply; 4x16GB DDR3

1866MHz PC3-14900; 24 DIMM slots to 768 GB; 2x500GB SATA 6Gb/s 7.2K rpm SFF Hot Plug 2x 100 GB SATA 2.5 SSD hot plug; HD up to 24TB;

megaRAID 9271CV w/8 internal SAS/SATA ports; 2x1Gigabit Ethernet LAN; Flash 16GB SD card module. For European power supplies, with

European power cords.

3.1.2 Quantity one (1) EMC VNXe 3200 or equivalent, with the following key features:

a.Archiving Server: VNXE3200; Dual Storage Processor (2x SP), disk processor enclosure (DPE):

a.8 Gb/s Fibre Channel Module b.12x3.5" SAS/NL SAS drives (2u) c.Security and compliance Suite for EMC VNX d.Remote protection suite for EMC VNX e.VNXE Base Software package f.BASE OE v2.0 DUAL SP EMC ECOSYS g.EMC-VNXE DEPLOYMNENT SUPPORT h.VNXe eLearning Value Pak i.EMC-ENHANCED HW SUPPORT-WARR UPG j.ENHANCED SOFTWARE SUPPORT-PLATFORM/ELM. Manufacturer: EMC. For European power supplies, with European power cords.

3.1.3 Quantity one(1) Cisco ASA5545 meeting or exceeding the following capabilities:

Firewall: Cisco ASA5545 with FirePower Bundle and Dual Power Supplies. Includes ASA 5545, Botnet Traffic Filtering, IPS, Application

Control, Advanced Malware protection. 1 Year subscription. Includes Also Fire sight Management Center 750 with 10 managed devices licenses. For European power supplies, with European power cords.

3.1.4 Quantity ten (10) Juniper EX4200-48T switches meeting or exceeding the following:

Ports 48 -10/100/1000 a.2- XFP-LR b.Uplink modul EX-UM-4SFP c.Rail Kit 1U Rack unit Rail kit d.Data Rate EX4200-24P/24T/24F: 88 Gbps e.Backplane f.Speed 128 Gbps (Virtual Chassis) g.MAC Addresses 32,000 h.IPv4 Unicast I Multicast Routes 16,000 I 8,000 i.Number of VLANs 4,096 j.ARP Entries 16,000 k.For European power supplies, with European power cords.

3.1.5 Quantity one (1) Cisco UCS C220 M3 Rack Server meeting or exceeding the following capabilities:

a.Processor 2 x Intel Xeon E5-2660 v2 (10 cores, 2.20GHz, 25MB Cache) b.Rail Kit 1U Rack unit Rail kit for C220 Server

3 5

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

c.Power Supply Power Supply 2 x 650W power supply d.Memory, Standard 4 x 16GB DDR3 1866MHz PC3-14900 e.Memory Slots 16 DIMM slots, up to 512 GB f.Included Hard Drives 2 x 1TB SATA 6Gb/s 7.2K SFF Hot Plug g.2x300GB SAS 6Gb/s 15K SFF Hot Plug h.Hard Drive Capacity Up to 8TB i.RAID Controller MegaRAID 9271CV with 8 internal SAS/SATA ports j.Ethernet Card 2 x 1Gigabit Ethernet LAN k.Cisco Flexible Flash 16GB SD Card module l.For European Power supplies, with European power cords.

3.1.6 Quantity twenty (20) IP Phone 3905 or equivalent, meeting or exceeding the following:

a.Licensing Basic User Connect License b.power Power Injector (CP-PWR-INJ) c.Codec support G.71,G.722,G.729a,iLBC d.For European power supplies, with European power cords.

3.1.7 Quantity five (5) IP Phone 7821 supporting two lines or equivalent, meeting or exceeding the following:

a.Licensing Basic User Connect License b.power Power Injector (CP-PWR-INJ) c.Codec support G.71,G.722, G.729a,iLBC.

d.For European power supplies, with European power cords.

3.1.8 Quantity three (3) IP Phone 7841 supporting four lines or equivalent, meeting or exceeding the following:

a.Licensing Basic User Connect License b.power Power Injector (AIR-PWRINJ5) c.Codec support G.71,G.722, G.729a,iLBC.

d.For European power supplies, with European power cords.

3.1.9 Quantity two (2) IP Phone 7861 supporting 16 lines or equivalent, meeting or exceeding the following:

a.Licensing Enhanced User Connect License b.power Power Injector (CP-PWR-INJ) c.Codec support G.71,G.722, G.729a,iLBC d.For European power supplies, with European power cords.

3.1.10 Quantity ten (10) Cisco Unified IP Phone 8945- EOL use 8845 meeting or exceeding the following specifications, a.Licensing Enhanced User Connect License b.power power adapter (CP-PWR-CUBE-3 c.Codec support G.71, G.71, G.729a,G.729ab,G.722, d.and Internet Low Bitrate (iLBC) audio compression codecs are supported.

e.For European power supplies, with European power cords.

3.1.11 Quantity nine (9) Cisco Unified IP Phone 9971 - EOL use 8851 meeting or exceeding the following specifications:

a.Licensing Enhanced IP User Connect License for UCM release 7.1(5) or later b.Power CP-PWR-CUBE-4= c.Codec support G.71, G.71, G.729a, G.729ab,G.722, d.iSAC and Internet Low Bitrate Codec (iLBC) e.Protocols SIP for signaling f.H.264 for video g.For European power supplies, with European power cords.

3.1.12 Quantity twenty (20) Juniper EX4200-24T meeting or exceeding the following specifications:

a.Ports 24 -10/100/1000 b.2- XFP-LR c.Rail Kit 1U Rack unit Rail kit d.Data Rate EX4200-24P/24T/24F : 88 Gbps e.Backplane Speed 128 Gbps (Virtual Chassis) f.MAC Addresses 32,000 g.IPv4 Unicast I Multicast Routes 16,000 I 8,000 h.Number of VLANs 4,096 i.ARP Entries 16,000 j.For European power supplies, with European power cords.

3.2. Commercial Markings. All other items shall have acceptable commercial markings that meet the guidelines in Department of Defense

Guide to Uniquely Identifying Items http://www.acq.osd.mil/uid .

4 5

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

3.3 Inspection, Testing, and Control.

3.3.1 Inspection and Testing. The contractor shall assure that all necessary inspections and tests are performed on completed products, and this shall include all inspections and tests, which are normally performed for the equipment on order.

3.3.2. Sites for Inspection, testing and Acceptance. Inspection, testing and acceptance of all equipment and US services shall be at origin. Inspection and testing shall be performed by the contractor. Acceptance shall be via DD-250 based on conformance with SOW part number or by item description matching required characteristics (in the case of offers of an equivalent to the SOW part number). The DD-

250 shall be mailed or FAX or sent via WAWF to the PCO.

3.4 Warranty. The contractor shall supply a commercial warranty for all items furnished herewith.

*** END OF NARRATIVE C0001 ***

5 5