6911_Carpet_SOW.pdf

Replace Carpet in Building 6911 (Security Forces)

Battle Creek ANG Base

Project Description:

Replace existing commercial carpeting and vinyl base in building 6911 at the Battle Creek Air National

Guard (ANG) Base.

Project Scope:

Complete specified work in the following building room numbers (see provided floorplan):

216, 217, 261, 262, 263, 264, 265, 269, 270, 271, north-east corner of room 274 (shown on drawing with grid pattern), half of office 227 (full depth, approximately 26’ wide), closet adjacent to lobby (215). .

Scope includes adjacent closets as applicable.

Removal:

Remove and dispose of all carpet and resilient base. Prep floor as necessary for installation of new carpet. Repair and paint all wall damage caused by base removal.

Installation:

Install new carpet in all areas specified above in accordance with attached specification section. Color to be selected from manufacturer’s full range. Basis of design is Shaw Contract Group, Text Ultraloc, style number 5A124, or equal (as approved by the owner). Alternative products must meet or exceed the performance characteristics of the basis of design (attached).

Install new resilient base in all areas specified above. Use type TS rubber base, 1/8” thickness, 4” height. Color to be selected from manufacturer’s full range.

Furniture/Equipment :

Installer will move all furniture and equipment necessary to facilitate removal and installation of all carpet and base.

Submittal Process:

Provide material submittals for all materials to be used on the job for approval by the owner. Provide color samples for carpet and base. Provide Safety Data Sheets and estimated use quantities for any chemicals used on the project, including glue, surface prep materials, adhesive, solvents, etc.

Documents must be submitted and approved prior to bringing materials on base.

text ultraloc® collection: Turn-Key performance broadloom specifications style name text ultraloc® style number 5A124 construction pattern loop fiber eco solution q® nylon dye method 87% solution dyed / 14% yarn dyed u.s. metric pattern repeat 0.60"w x 0.70"l 15.24 mm w x 17.78 mm l tufted weight 26.0 881.55 g/m² gauge 1/10 39.37 per 10 cm stitches per inch 11.0 43.31 per 10 cm finished pile thickness 0.150 3.81 mm total thickness 0.292 7.42 mm average density 6240 11.62 kilotex product size 12 foot 3.66 m primary backing synthetic secondary backing ultraloc® protective treatments ssp® shaw soil protection testing radiant panel Class I nbs smoke less than 450 electrostatic propensity less than 3.5 kv warranties lifetime commercial limited installation method direct glue coordinating products venture capital, urban, digital, in-transit, global, metro, space, culture, evolution, innovation, terra, fossil, divide, equal, edit, mecca, graphic, graphic, text, blog, blog ultraloc® environmental certification green label plus certification number glp 2271 nsf140 gold cradle to cradle silver certified shawcontractgroup.com | 1 800.257.7429 | shawcontractgroup.cn | +86 400 800 7429 (Asia Pacific) text ultraloc® ingredients face fiber nylon 6 dye method 86% solution dyed / 14% yarn dyed backing performance polymer emulsion surface treatments non c8 fluorocarbon chemistry recycled content total recycled content (by weight) 10.0 % pre-consumer 10.0 % post-consumer 0.0 % bio-based/rapidly renewable content (by weight) 0.0 % packaging 100% recyclable country of origin (manufacturer) USA

MBDC cradle to cradle silver certified NSF 140 gold certified CRI green label plus GLP 2271 USGBC LEED contributes eco impacts end of life To recycle call 800.509.Shaw or +86 400 800 Shaw (Asia Pacific) materials does not contain PVC, phthalates, or PBD/PBDE

Meets or exceeds all local and national regulations in country of manufacture.

Manufactured in an ISO9001 & ISO14001 certified facility or equivalent.

Recycled content is calculated using system allocation, mass balance, and direct insertion.

The actual recycled content in this product will likely vary. For more information email info@shawgreenedge.com.

third party certifications