W912ES15T0187_Amendment_0003.doc

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

SPECIFICATIONS

The US Army Corps of Engineers, St. Paul District, intends to acquire one new standard commercial configuration steel tracked Heavy-Duty Hydraulic Excavator to support the dredging mission of the Corps of Engineers Dredge, William L. Goetz. This Excavator will be regularly transported by a barge in conjunction with the Dredge Goetz fleet. Due to the rated deck load capacity of the transport barge, the maximum weight of the excavator (fully loaded (sans operator) and fueled) must be no more than 70,000 lbs. The principal purposes of the excavator include placing and installing drop structures, constructing earthen containment berms, and undertaking mechanical dredging of the Mississippi River and its tributaries from the deck of the transport barge. That work will entail the excavation, lifting, and placement of wet sand at full arm/boom extension.

The Government intends to issue a purchase order to the quoter providing the lowest-priced product that meets ALL of the following salient characteristics. Compliance with the salient characteristics of the solicitation will be determined by evaluating the standard commercial configuration product quoted against the requirements of the solicitation using product brochures, catalogs and other publicly available information. Quotations offering nonstandard products or nonstandard product configurations will not be considered. Multiple quotations from the same vendor will not be considered.

SALIENT CHARACTERISTICS:

Ground pressure not to exceed 6.5 pounds per square inch

Net Horsepower (per SAE J1349/ISO 9249 standards) shall be a minimum of 200 HP.

Engine shall have a U.S. EPA Tier 4 final rating.

Minimum bucket reach at ground level shall be no less than 33’.

Excavator shall be equipped with a hydraulically controlled thumb attachment.

Excavator shall be equipped with an auto grease system.

Excavator shall be equipped with factory installed heat and air conditioning.

Excavator shall be equipped with an attachment quick coupler system to allow the operator to change attachments from the operator seat, *See Quick Coupler specifications below*.

Manufacturer’s published standard warranty against defects in materials and workmanship of not less than one year from the date of delivery

Two complete sets of operation and service manuals to be included.

Track pads minimum of 31.5” in width.

Minimum bucket capacity 2.25 cubic yards with lifting eye.

Shall have exterior cab lighting and boom lights installed for night operations.

Shall be equipped with rear view mirrors and a camera with in-cab monitor.

The excavator shall be delivered fully assembled and ready to be placed in service.

The operators station shall be pressurized with a positive air filtration system.

Quick Coupler specifications:

The quick coupler shall be installed on the excavator when delivered.

Coupler shall be a factory product designed to mount on the excavator being provided.

The quick coupler shall be able to be hydraulically actuated from the operator station.

DELIVERY ADDRESS:

Fountain City Service Base

431 North Shore DR Fountain City WI 54629

TECHNICAL POINT OF CONTACT:

Keith Graham, Plant Manager, 651-290-5141

Or

Jake Bernhardt, Physical Support Branch Chief, 651-290-5981

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 29-Sep-2015 11:00 AM to 16-Nov-2015 11:00 AM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description including trade-in of a Caterpillar 330BL serial number 6DR01574 has been deleted.

The following have been added by reference:

(End of Summary of Changes)