W912ES-15-T-0187_Amendment_0004.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to re-insert the trade-in of the CAT 330BL excavator for this procurement.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Nov-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912ES-15-T-0187

X 9B. DATED (SEE ITEM 11)

24-Sep-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Nov-2015

CODE

CONTRACTING DIVISION

USACE - ST. PAUL

180 5TH STREET E SUITE 700

ST. PAUL MN 55101-1678

W912ES 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912ES-15-T-0187

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

SPECIFICATIONS

The US Army Corps of Engineers, St. Paul District, intends to acquire one new standard commercial configuration steel tracked Heavy-Duty Hydraulic Excavator to support the dredging mission of the Corps of Engineers Dredge, William L. Goetz. This Excavator will be regularly transported by a barge in conjunction with the Dredge Goetz fleet. Due to the rated deck load capacity of the transport barge, the maximum weight of the excavator (fully loaded (sans operator) and fueled) must be no more than 70,000 lbs. The principal purposes of the excavator include placing and installing drop structures, constructing earthen containment berms, and undertaking mechanical dredging of the Mississippi River and its tributaries from the deck of the transport barge. That work will entail the excavation, lifting, and placement of wet sand at full arm/boom extension.

The Government intends to issue a purchase order to the quoter providing the lowest-priced product that meets ALL of the following salient characteristics. Compliance with the salient characteristics of the solicitation will be determined by evaluating the standard commercial configuration product quoted against the requirements of the solicitation using product brochures, catalogs and other publicly available information. Quotations offering nonstandard products or nonstandard product configurations will not be considered. Multiple quotations from the same vendor will not be considered.

SALIENT CHARACTERISTICS:

Ground pressure not to exceed 6.5 pounds per square inch Net Horsepower (per SAE J1349/ISO 9249 standards) shall be a minimum of 200 HP.

Engine shall have a U.S. EPA Tier 4 final rating.

Minimum bucket reach at ground level shall be no less than 33’.

Excavator shall be equipped with a hydraulically controlled thumb attachment.

Excavator shall be equipped with an auto grease system.

Excavator shall be equipped with factory installed heat and air conditioning.

Excavator shall be equipped with an attachment quick coupler system to allow the operator to change attachments from the operator seat, *See Quick Coupler specifications below*.

Manufacturer’s published standard warranty against defects in materials and workmanship of not less than one year from the date of delivery Two complete sets of operation and service manuals to be included.

Track pads minimum of 31.5” in width.

Minimum bucket capacity 2.25 cubic yards with lifting eye.

Shall have exterior cab lighting and boom lights installed for night operations.

Shall be equipped with rear view mirrors and a camera with in-cab monitor.

The excavator shall be delivered fully assembled and ready to be placed in service.

The operators station shall be pressurized with a positive air filtration system.

Quick Coupler specifications:

The quick coupler shall be installed on the excavator when delivered.

Coupler shall be a factory product designed to mount on the excavator being provided.

The quick coupler shall be able to be hydraulically actuated from the operator station.

Trade-in machine:

Caterpillar 330BL, serial number 6DR01574 Machine hours approximately 5,200. The machine hours are approximate because the excavator is still in services.

Undercarriage is on run out.

DELIVERY ADDRESS:

Fountain City Service Base 431 North Shore DR Fountain City WI 54629

TECHNICAL POINT OF CONTACT:

Keith Graham, Plant Manager, 651-290-5141 Or Jake Bernhardt, Physical Support Branch Chief, 651-290-5981

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 16-Nov-2015 11:00 AM to 04-Dec-2015 11:00 AM.

(End of Summary of Changes)

Heavy Duty Hydraulic Excavator Procurement

ITEM NO ITEM DESCRIPTION QUANTITY UNIT UNIT PRICE

000101 New Heavy Duty Hydraulic Excavator Firm Fixed Price FOB: Destination

1 Each

ITEM NO ITEM DESCRIPTION QUANTITY UNIT UNIT PRICE

000102 Trade-in of a Caterpillar 330BL Serial number 6DR01574 Firm Fixed Price FOB: Destination

1 Each

NET AMOUNT: __________________________