A02_-_Statement_of_Work_(SOW).pdf

Statement of Work US Army Corps of Engineers Memphis District (MVM)

Specifications for three replacement Propellers for the Dredge Hurley propulsion system.

Scope: The contractor shall deliver the parts listed below to 2915 Riverport Road, Memphis, Tenn. 38109 Shipping and Receiving.

Three Replacement Propellers

The three Propellers must be obtained from any vendor that’s register in System for Award Management (SAM). Vendor must supply items that comply with all safety and health standards.

The Motor Vessel Dredge Hurley is equipped with 3 Ulstein Z- Drives systems. The fixed pitch propellers are installed on the Z-Drive system (1 per system). New wheels must match manufacturer’s recommendations:

Diameter X Pitch: 74” X 95”

Style: Kaplan (Sound Propeller) * FAR 52.211-6 Brand name or Equal**

Rotation: Right Hand

Developed Blade Area: 0.72

Material: CF3 Stainless Steel

Number of Flukes: Four (4)

Bore diameters/length (an actual propeller to be sent for measuring to awarded vendor)

Weight: 2800 lbs.

Design power: 1200 hp.

Design shaft RPM: 250 RPM

Thickness rule: ABS

Vendor shall be responsible for measuring, recording, and employing – Greater and lesser bore diameters, taper length, hub thickness, adequate fluke thickness provisions for longevity and durability. Also included, completing of any ancillary machining/drilled/tapped holes.

Final price to include freight to/from of a single propeller sent for measuring (once awarded) and freight for three propellers to Ensley Engineering Yard.

Place of Performance: Deliver to Ensley Engineering Yard Building 8, 2915 Riverport Road, Memphis, TN 38109 within 26 Weeks of contract award, P.O.C for questions regarding specifications is Wade Channell by phone 901-544-3607.

Type of Contract: The Government will award a Firm Fixed Price (FFP) purchase order.

Physical Security: The Contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use, if needed.

Contractor will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas. All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or restricted areas.

Access and General Protection/Security Policy and Procedures: All Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provide by government representative). The Contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshall Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

Pre-Screen Candidates Using E-Verify Program: The Contractor must pre-screen Candidates using the E-verify Program (http://www.dhs.gov/E-Verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award.

Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government.

These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

http://www.dhs.gov/E-Verify