16-B-0016_Amend_0002.pdf

W68SBV61963019

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to revise the plans and specifications.

The bid opening date is extended from October 28, 2016 to November 1, 2016 at 2 pm Pacific.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 25-Oct-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912EF-16-B-0016

X 9B. DATED (SEE ITEM 11)

27-Sep-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

25-Oct-2016

CODE

USAED, WALLA WALLA - CONTRACTING DIV.

CRISTINA VEGA

201 N. THIRD AVENUE

WALLA WALLA WA 99362-1876

W912EF 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912EF-16-B-0016

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

The following have been added by full text:

AMENDMENT 02

Summary of changes for Amend -0002 Ice Harbor Trolley and Fish Release Pipes

16-B-0016

1. Revised the following Specification:

SECTION 05 50 01.00 28 METALWORK FABRICATION

Revised the following paragraphs:

1.1 REFERENCES:

Added ASTM A193/A193M

1.2 SUBMITTALS:

Removed Concrete Anchors Added Trolley Pipe Concrete Anchors and

Fish Release Pipe Concrete Anchors

Added par’s: 2.6.1.1 Trolley Pipe Concrete Anchors and

2.6.1.2 Fish Release Pipe Concrete Anchors

2. Revised the following Drawing:

S-502 See Bracketed areas for changes

3. Revised the following Clause: See yellow highlights for change

252.236-7001 CONTRACT DRAWINGS, MAPS, AND SPECIFICATIONS (AUG 2000)

SECTION 00700 - CONTRACT CLAUSES

The following have been modified:

252.236-7001 CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall--

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Drawing Number

Sheet Number

Title

Revision Number

Date

ICE HARBOR LOCK AND DAM

TROLLEY AND FISH RELEASE PIPES

GENERAL

IHG-1-0-1/512 G-001 COVER SHEET AND LOCATION MAPS

IHG-1-0-1/513 G-002 INDEX TO DRAWINGS

STRUTURAL

IHD-1-5-4/3 S-101 POWERHOUSE - PARTIAL PLAN

IHD-1-5-4/4 S-102 SOUTH AUXILIARY PUMP WALL - PARTIAL

PLAN

IHD-1-5-4/5 S-103 FALL PROTECTION PLAN - AND ELEVATION

IHD-1-5-4/6 S-301 POWERHOUSE - TRANSVERSE SECTION -

TROLLEY PIPES

IHD-1-5-4/7 S-302 POWERHOUSE - TRANSVERSE SECTION -

FISH RELEASE PIPES

IHD-1-5-4/8 S-303 PUMPHOUSE - TRANSVERSE SECTION -

TROLLEY PIPES SHEET 1

IHD-1-5-4/9 S-304 PUMPHOUSE - TRANSVERSE SECTION -

TROLLEY PIPES SHEET 2

IHD-1-5-4/10 S-501 TROLLEY AND FISH RELEASE PIPE -

SECTIONS AND DETAILS

IHD-1-5-4/11 S-502 TROLLEY AND FISH RELEASE PIPE -

SUPPORT DETAILS

A 10-24-16

IHD-1-5-4/12 SA201 TROLLEY ELEVATIONS

IHD-1-5-4/13 SA301 TROLLEY SECTIONS

IHD-1-5-4/14 SA501 TROLLEY - PLAN DETAILS

FOR INFORMATION ONLY (FIO)

The Government does not warrant the accuracy of the FIO drawings. The Government recommends that the Contractor verify the accuracy of FIO drawings.

IHP-1-4-2/26 FIO-001 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - TAILRACE -

LONGITUDINAL SECTION

IHP-1-4-2/1 FIO-002 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - TYPICAL TRANSVERSE

SECTION

IHP-1-4-2/21 FIO-003 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - DRAFT TUBE SECTIONS

- REINF.

IHP-1-4-2/22 FIO-004 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - TAILRACE - TYP

TRANSVERSE SECT

IHP-1-4-2/23 FIO-005 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - TAILRACE - PLAN AT EL

315.00

IHP-1-4-2/24 FIO-006 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - TAILRACE PLAN AT EL

332.5 & 349.5

IHP-1-4-2/25 FIO-007 POWERHOUSE - CONCRETE OUTLINE -

GENERATOR BAYS - TAILRACE - DECK PLAN

& DETAILS

IHP-1-0-0/6 FIO-008 SHEET TITLE LINE 1 - PUMPHOUSE -

GENERAL PLAN AND SECTIONS

IHP-1-0-0/7 FIO-009 SHEET TITLE LINE 1 - PUMPHOUSE - PLANS

AND TRANSVERSE SECTION

103371A FIO-010 115 KV TRANSMISSION LINE - LONG MILE 1

FROM ICE HARBOR - (5648')

103371B FIO-011 115 KV TRANSMISSION LINE - LONG MILE 1

FROM ICE HARBOR - (5526')

154201A FIO-012 115 KV TRANSMISSION LINE - LONG MILE 1

OF 9 MILES - FROM ICE HARBOR (5450.1')

154201 FIO-013 115 KV TRANSMISSION LINE - LONG MILE 1

OF 9 MILES - FROM ICE HARBOR (5450.1')

IHD-1-5-3/75 FIO-014 BIRD EXCLUSION WIRE - PLAN

IHD-1-5-0/14 FIO-015 PUMPHOUSE MISCELLANEOUS -

METALWORK - HANDRAIL PLAN - AND

DETAILS

(End of clause)

Microstation V8 is the only CAD system used by Walla Walla District. Contract drawings created on CAD in Microstation V8 will be available in electronic form for use by the Contractor. No For Information Only drawings are available on CAD. The Contractor assumes all risks associated in using electronic CAD drawings. The contract drawings shall govern if there are any discrepancies between the electronic copy and the contract drawing. The Contractor shall promptly notify the Contracting Officer of any discrepancies. The Government will not be responsible to correct the electronic CAD drawing. If contract modifications are issued, the associated electronic CAD drawings will not be available to the Contractor.

Electronic copies of CAD drawings are only available in Bentley MicroStation format. The Government will provide the files on CD ROM.

(End of Summary of Changes)