Amendment 1 RFQ - W912DY20Q0222 -RAMSTEIN HIGH SCHOOL.pdf

DIRECTORATE OF CONTRACTING - HNC

ATTN JAMES ZEIGLER

(256) 895-9385

HUNTSVILLE AL 35816

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

a. Update Attachment 1 dated 5 October 2020.

b. Update Attachment 2 (FID) dated 5 October 2020

c. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912DY20Q0222

X 9B. DATED (SEE ITEM 11)

05-Oct-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0001

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

05-Oct-2020

CODE

US ARMY ENGINEERING & SUPPORT CENTER

475 QUALITY CIRCLE NW

HUNTSVILLE AL 35806

W912DY 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W912DY

FACILITY CODECODE

EMAIL:TEL:

W912DY20Q0222

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

(End of Summary of Changes)

FID Items 1 300 ea 24.1 Item No. C21: Folding Chair, Metal Frame, Upholstered $0.00

2 4 ea 24.2 Item No. AF06: Chair Cart, Folding Chairs $0.00 3 1 ea 24.3 Item No. S22: Tote Tray Storage Cabinet $0.00 4 2 ea 24.4 Item No. A19: Flatwork Truck $0.00 5 6 ea 24.5 Item No. AF24: Pottery Wheel $0.00 6 1 ea 24.6 Item No. AF25: Slab Roller $0.00 7 1 ea 24.7 Item No. AF27: Light Table $0.00 8 1 ea 24.8 Item No. D12: Audio Visual Desk, Metal/Laminate $0.00 9 1 ea 24.9 Item No. AF13: Hospital Bed $0.00 10 14 ea 24.10 Item No. AF17: Outdoor Bench with Back, Concave $0.00 11 8 ea 24.11 Item No. AF18: Outdoor Bench with Back, Convex $0.00 12 2 ea 24.12 Item No. AF19: Outdoor Bench, Backless $0.00 13 2 ea 24.13 Item No. A01: Conductor’s System $0.00 14 76 ea 24.14 Item No. A02: Music Stand, Student $0.00 15 4 ea 24.15 Item No. A03: Music Stand Cart $0.00 16 81 ea 24.16 Item No. C08: Music Chair, Metal Frame, Thermoplastic/Polypropylene $0.00

17 6 ea 24.17 Item No. AF07: Chair Cart, Music Chairs $0.00 18 7 ea 24.18 Item No. AF12: Garment Rack $0.00 19 1 ea 24.19 Item No. AF28: Guitar Rack $0.00 20 1 ea 24.20 Item No. AF29: Violin/Viola Rack $0.00 21 1 ea 24.21 Item No. AF30: Instrument Storage $0.00 22 1 ea 24.22 Item No. AF33: Sheet Music Storage $0.00 23 2 ea 24.23 Item No. AF34: Tuba / Sousaphone Storage Rack, Mobile $0.00

24 8 ea 24.24 Item No. AF35: Mobile Choral Risers $0.00 25 1 ea 24.25 Item No. A23: Ice Machine with Bin $0.00 26 3 ea 24.26 Item No. A24: Bottom Freezer Refrigerator $0.00 27 1 ea 24.27 Item No. A25: Top Freezer Refrigerator $0.00

HNC Unit Cost

HNC Total Cost

AMD 05OCT20 - Admin NC, DoDEA, Ramstein High School, Ramstein AFB, Germany - OPEN MARKET

# Qty Unit

FID

Para. Item Code & Description - See Note 1

Vendor Quoted

Product Line Quoted

Model Quoted

28 1 ea 24.28 Item No. A26: Medical Refrigerator $0.00 29 4 ea 24.29 Item No. A27: Washer $0.00 30 4 ea 24.30 Item No. A28: Condensing Dryer $0.00 31 7 ea 24.31 Item No. S25: Drying Cabinet $0.00 32 1 ea 24.32 Item No. S26: Damp Proof Cabinet $0.00 33 8 ea 24.33 Item No. A22: Goggle Sanitizer Cabinet $0.00

$0.00

31 1 LS $0.00

32 1 LS $0.00

33 1 LS $0.00

$0.00

Provide Installation amount to right:

Provide Shipping amount to right:

Provide Commercial Shipping amount to right:

Evaluated Items - Installation & Shipping: Furniture Subtotal:

Installation of Furniture.

Commercial Shipping

Shipping. Per Note 2 below.

GRAND TOTAL:

*NOTE 1: See attached sheet(s) for item locations

*NOTE 2: Shipping is only allowed on ancillary items.

Furniture Item Descriptions (FID) DoDEA, Ramstein High School, Ramstein AFB, Germany – OPEN MARKET

AMENDED 05OCT20

Attachment #2 Page 1 of 39

Attachment #2

ADMIN NC

Attachment #2 Page 2 of 39

TABLE OF CONTENTS PAGE NO.

1.0 GENERAL

1.1 Submittal Requirements

1.1.1 RFQ Response

1.1.2 Non-Conforming RFQ Response

1.2 Submittal and Clarifications Format

1.3 Post Award Submittal

1.4 Contractor General Notes

2.0 Construction Requirements - Panel Supported Work Stations – NOT USED

3.0 Construction Requirements - Freestanding Integrated Desk Systems – NOT USED

4.0 Construction Requirements - Metal/Laminate Desks – NOT USED

5.0 Construction Requirements - Metal/Laminate Open Frame Technical Workstations –

NOT USED

6.0 Construction Requirements - Metal Furniture: Lateral Files, Storage Towers/Cabinets, & Bookcases – NOT USED

7.0 Construction Requirements - Laminate Tables, Metal Bases – NOT USED

8.0 Construction Requirements - Laminate Training Tables– NOT USED

9.0 Construction Requirements - Wood Casegoods, Executive II – NOT USED

10.0 Construction Requirements - Wood Casegoods, Executive III – NOT USED

11.0 Construction Requirements - Wood Conference Tables, Executive II – NOT USED

12.0 Construction Requirements - Wood Conference Tables, Executive III – NOT USED

13.0 Construction Requirements - Laminate Casegoods – NOT USED

14.0 Construction Requirements - Laminate Conference Tables – NOT USED

15.0 Construction Requirements - Ergonomic Task & Conference Seating – NOT USED

16.0 Construction Requirements - Executive Seating – NOT USED

17.0 Construction Requirements - Ergonomic Task Stool – NOT USED

18.0 Construction Requirements - Traditional Executive Seating – NOT USED

19.0 Construction Requirements - Seating, Metal Frame – NOT USED

20.0 Construction Requirements - Seating, Tablet Arm – NOT USED

21.0 Construction Requirements - Seating, Wood Frame – NOT USED

22.0 Construction Requirements - Lounge Seating – NOT USED

23.0 Construction Requirements - Industrial Storage Cabinet – NOT USED

24.0 Ancillary Items

24.1 Item No. C21: Folding Chair, Metal Frame, Upholstered

24.2 Item No. AF06: Chair Cart, Folding Chairs

24.3 Item No. S22: Tote Tray Storage Cabinet

24.4 Item No. A19: Flatwork Truck

24.5 Item No. AF24: Pottery Wheel

24.6 Item No. AF25: Slab Roller

24.7 Item No. AF27: Light Table

24.8 Item No. D12: Audio Visual Desk, Metal/Laminate

24.9 Item No. AF13: Hospital Bed

24.10 Item No. AF17: Outdoor Bench with Back, Concave

24.11 Item No. AF18: Outdoor Bench with Back, Convex

24.12 Item No. AF19: Outdoor Bench, Backless

Attachment #2 Page 3 of 39

24.13 Item No. A01: Conductor’s System

24.14 Item No. A02: Music Stand, Student

24.15 Item No. A03: Music Stand Cart

24.16 Item No. C08: Music Chair, Metal Frame, Thermoplastic/Polypropylene

24.17 Item No. AF07: Chair Cart, Music Chairs

24.18 Item No. AF12: Garment Rack

24.19 Item No. AF28: Guitar Rack

24.20 Item No. AF29: Violin/Viola Rack

24.21 Item No. AF30: Instrument Storage

24.22 Item No. AF33: Sheet Music Storage

24.23 Item No. AF34: Tuba / Sousaphone Storage Rack, Mobile

24.24 Item No. AF35: Mobile Choral Risers

24.25 Item No. A23: Ice Machine with Bin

24.26 Item No. A24: Bottom Freezer Refrigerator

24.27 Item No. A25: Top Freezer Refrigerator

24.28 Item No. A26: Medical Refrigerator

24.29 Item No. A27: Washer

24.30 Item No. A28: Condensing Dryer

24.31 Item No. S25: Drying Cabinet

24.32 Item No. S26: Damp Proof Cabinet

24.33 Item No. A22: Goggle Sanitizer Cabinet

25.0 Construction Requirements - Benching Systems - NOT USED

26.0 Construction Requirements - Console Systems – NOT USED

APPENDIX – FINISHES

Attachment #2 Page 4 of 39

1.0 General

Item descriptions and quality requirements, as described in the FID (Furniture Item Descriptions), are for the quality, functional performance and design intent of the furnishings required for this project. Products quoted that meet all functional and quality requirements, including all salient features listed in the product descriptions, will be considered responsive provided they are fully compliant with the RFQ requirements.

Compliance shall be determined by performance, features, quality, design intent, and value. Any item descriptions, salient features or quality requirements listed within this document are not intended to be proprietary.

1.1 Submittal Requirements

All manufacturers shall provide manufacturer’s technical documentation and manufacturer’s construction specifications for each item quoted for verification the proposed products meet all requirements listed in the FID. The RFQ response shall be submitted in the format outlined below.

1.1.1 RFQ Response

RFQ technical responses are the documents which, together with contractual documents (SF18, SF30, Attachment 1 in Excel), make up an overall RFQ response (the quote). RFQ technical responses shall be clearly organized into (1) Adobe Acrobat (PDF) document. The PDF document shall be searchable and include book marks for each item number and be organized per item number of the FID. Each RFQ is a separate contract activity, and specifications from previous projects will not be retrieved and reviewed. All product specifications and information presented shall be legible.

All technical documentation related to each item number shall be located within the same tab in the RFQ response and shall be submitted in the following order:

1. Product Information Required for Each Item Number:

a. Item number for each product submitted in the RFQ response.

b. Manufacturer, product line, and model number for each item and its components.

c. Overall dimensions.

d. Product image.

e. Fabric and finish options proposed for RFQ pricing that have been priced for each item.

2. Drawings:

a. Provide plan view drawings clearly legible and labeled showing legend of components and dimensions for each freestanding desk and panel-supported work station, including clusters.

b. Provide elevations or isometrics.

i. Elevations required with stacking/segmented drawings for panel tiles

Attachment #2 Page 5 of 39

c. Electrical and data shall be on a separate drawing from itemized component drawing. Drawing shall be clearly legible and labeled, identifying all locations of electrical and data/communication outlets.

3. Product Specific Compliance Documentation:

a. Provide published, detailed, technical documentation including, but not limited to, specification guides, price catalogs, and manufacturer’s published GSA Price List to demonstrate compliance with requirements.

b. Highlight, circle, or mark the model, size, type, and any optional features proposed in the RFQ response.

4. Technical Supporting Compliance Documentation:

a. Provide manufacturer’s technical and construction specifications demonstrating compliance to requirements.

b. Documentation shall only be submitted once for multiple items from the same product line.

c. Clearly indicate the item numbers that submitted documentation supports.

5. Testing Documentation:

a. Contractors are NOT required to submit testing documentation with quotes; however, the Contracting Officer reserves the right to request actual copies of test reports at any time before or after award.

6. Environmental Documentation:

a. Contractors are NOT required to submit environmental documentation with quotes; however, the Contracting Officer reserves the right to request actual copies of environmental documentation at any time before or after award.

b. Provide certification for Indoor Air Quality (GREENGUARD or equivalent).

c. Provide documentation regarding recycled content and recyclability for all products submitted.

7. Warranty Documentation:

a. Warranty documentation is required to be submitted for seating only.

b. Contractors are NOT required to submit warranty documentation with quotes; however, the Contracting Officer reserves the right to request actual copies of warranties at any time before or after award.

c. Although all other items do not require warranty documentation, the contractor is responsible for providing warranty coverage as required in the FID.

d. Provide any additional or extended warranty that exceeds manufacturer’s standard warranty; extended warranty shall be clearly stated on manufacturer’s letterhead and include a verifiable digital signature containing encryption or handwritten signature, date, and title of the company official accepting technical responsibility.

e. Some warranties may exceed GSA warranties. Refer to item descriptions for specific warranty requirements by product type.

1.1.2 Non-Conforming RFQ Response

Submittal of product brochures shall not be acceptable in place of technical documentation or construction specifications. Submittal of a general price list containing

Attachment #2 Page 6 of 39 large amounts of items not relevant to the procurement is not acceptable. Extended warranties shall not be typed onto the manufacturer’s current warranty. Submittals not in compliance with Section 1.1.1 of the FID shall be considered non-conforming and declined.

1.2 Submittal and Clarifications Format

The RFQ shall be submitted via electronic communications as stated in Section 1.1.1.

The technical supporting documentation shall be submitted in a searchable Adobe Acrobat (PDF) document and organized and bookmarked by item number of the FID.

Embedded objects, i.e. embedded links, files, images within clarification responses, shall be considered non-conforming.

1.3 Post Award Submittal

Refer to Statement of Work (SOW).

1.4 Contractor General Notes

1. Awarded contractor is responsible for verifying all existing field conditions i.e.

including, but not limited to electrical conditions.

2. Although such work is not specifically indicated, furnish and install all supplementary or miscellaneous items, appurtenances, and devices incidental to, or necessary for, sound, secure, and complete installation.

3. Furniture, fixtures and equipment heights shall be a minimum of 18” from the top of the panel to the deflector plate of the sprinkler head. Awarded contractor shall confirm dimensions in field prior to manufacturing.

4. Exposed storage backs that are not located against walls shall be fully finished.

5. Design Intent - Furniture, fixtures and equipment shall conform to the following to ensure finish materials are coordinated throughout the facility as much as possible:

i. In learning and classroom lab areas, items supporting the teaching environment, such as student seating and desks and teacher desks shall be from the same manufacturer with matching or coordinating finish material selections. Refer to specific requirements in the FID item descriptions.

ii. All wood casegoods and wood seating in a common suite or in the same room shall have identical veneer and finish process to ensure complete match in finish and sheen level. If furniture is not from the same manufacturer, a custom match shall be required with a benchmark sample to be required for approval.

Coloration of the sample shall be within industry standards.

iii. All laminate casegoods in a common suite or in the same room shall have identical finish materials to ensure complete match in finish.

iv. In staff areas and offices, all metal/laminate desks, storage and tables shall be from the same manufacturer to ensure continuity of finish and product styling.

v. All products proposed to be installed within one office, suite, or area shall consist of items of one style and finish. All products shall be free of rough or sharp edges. Proposed products shall include all components necessary to provide a

Attachment #2 Page 7 of 39 complete and stable unit. Items shall have consistent quality standards as described and required in the FID.

6. Keying Intent - Items required to be keyed shall conform to the requirements specified within each item description. The general intent follows:

i. Generally, items within a Learning Neighborhood, i.e. learning studios and hubs, labs locks are noted to be keyed alike.

ii. Generally, items at desks or in offices that house staff and teachers are noted to be keyed specific to the desk or within the room.

7. Upholstery Specifications

i. Refer to Appendix – Finishes for required upholstery specifications.

ii. If providing an equivalent upholstery or finish, provide end user with a full colorway with a minimum of three options of different patterns solid and/or textured textiles and varying colored fabrics within the same manufacturer or graded in range for selection after award.

iii. If equivalent upholstery and finishes are proposed, bidders shall provide actual samples or color images and specifications for the alternate fabric or finish. The Government retains the right to reject any alternates that are not equal to the required specification.

iv. Contractor shall be responsible for requesting testing and/or approval for Customer’s Own Material (COM) upholstery proposed as an alternate equivalent for an item.

8. Seating

i. Contractor shall provide casters suitable for hard surface or resilient floors.

ii. Seat width and depth shall be measured using the CMD (Chair Measurement

Device) protocol, where applicable. Seat width shall be measured from the widest outer points of the seat. Seat depth shall be measured from the most forward point of the back lumbar to the front edge of the seat. Overall height shall be measured from the finished floor to the top of the backrest.

iii. If the CMD (Chair Measurement Device) protocol is not used, seat width measurement shall be the dimension between arms, seat depth shall be measured from the front of the seat to the front of the backrest and overall height shall be measured from the finished floor to the top of backrest.

9. Plans provided may not match project requirements in all instances. Follow FID descriptions and configurations and Attachment 1 quantities and locations.

END OF SECTION

Attachment #2 Page 8 of 39

2.0 Construction Requirements - Panel Supported Work Stations – NOT USED

3.0 Construction Requirements - Freestanding Integrated Desk Systems – NOT USED

4.0 Construction Requirements - Metal/Laminate Desks – NOT USED

5.0 Construction Requirements - Metal/Laminate Open Frame Technical Workstations

– NOT USED

6.0 Construction Requirements - Metal Furniture: Lateral Files, Storage

Towers/Cabinets, & Bookcases – NOT USED

7.0 Construction Requirements - Laminate Tables, Metal Bases – NOT USED

8.0 Construction Requirements - Laminate Training Tables– NOT USED

9.0 Construction Requirements - Wood Casegoods, Executive II – NOT USED

10.0 Construction Requirements - Wood Casegoods, Executive III – NOT USED

11.0 Construction Requirements - Wood Conference Tables, Executive II – NOT USED

12.0 Construction Requirements - Wood Conference Tables, Executive III – NOT USED

13.0 Construction Requirements - Laminate Casegoods – NOT USED

14.0 Construction Requirements - Laminate Conference Tables – NOT USED

15.0 Construction Requirements - Ergonomic Task & Conference Seating – NOT USED

16.0 Construction Requirements - Executive Seating – NOT USED

17.0 Construction Requirements - Ergonomic Task Stool – NOT USED

18.0 Construction Requirements - Traditional Executive Seating – NOT USED

19.0 Construction Requirements - Seating, Metal Frame – NOT USED

20.0 Construction Requirements - Seating, Tablet Arm – NOT USED

21.0 Construction Requirements - Seating, Wood Frame – NOT USED

22.0 Construction Requirements - Lounge Seating – NOT USED

23.0 Construction Requirements - Industrial Storage Cabinet – NOT USED

24.0 Ancillary Items

Attachment #2 Page 9 of 39

24.1 Item No. C21: Folding Chair, Metal Frame, Upholstered

Seat Width: 18” minimum Seat Depth: 18” minimum

General Requirements:

a. Upholstered, cushioned seat and back pad

b. Heavy-duty steel frame seat and backrest

c. Backrest shall have concave shape and fully curled edges

d. Seat shall have fully curved edges

e. Flip up seat

f. (2) welded crossbars, front and rear

g. Replaceable, non-marring linear polypropylene feet

h. Shall be compatible with item AF06

Finish:

a. Vinyl: Manufacturer’s standard or graded-in selection equivalent to Virco Linen Gray

b. Metal: Manufacturer’s standard powder coat paint selection shall include silver

24.2 Item No. AF06: Chair Cart, Folding Chairs

Overall Dimensions: 68”W x 30.75”D x 69.75”H

Researched product lines:

Virco – 168 KI – Design Line

Item image is for general illustration purposes only, and it is not an exact representation of the requirement.

Researched product lines:

Virco – HCT6072

KI – KDT84

Attachment #2 Page 10 of 39

General Requirements:

a. Frame shall have a uni-welded construction with components welded into an integral unit

b. Double tier chair storage

c. Chairs suspend from tines

d. Stacks 84 chairs, minimum

e. (2) Fixed, (2) swivel 4” wheels

f. Shall coordinate with item C21

a. Metal: Manufacturer’s standard selection

24.3 Item No. S22: Tote Tray Storage Cabinet

Overall Dimensions: 48”W x 22”D x 84”H

Researched product lines:

Diversified Woodcrafts 350-4822K or equal

Item image is for general illustration purposes only, and it is not an exact representation of the requirement.

a. Solid maple frame with birch plywood panels

b. Hinged doors, locking

c. (48) Plastic tote trays

d. Shelves and divider for storing tote trays

a. Wood Veneer: Manufacturer’s standard stain selection shall include maple

Attachment #2 Page 11 of 39

b. Metal: Manufacturer’s standard selection

24.4 Item No. A19: Flatwork Truck

Overall Dimensions: 34.5”W x 24”D x 74.5”H

a. Bailey ware truck with racks

b. Heavy duty angle iron posts

c. Galvanized rungs

d. (26) Division racks

e. Shall fit a 24” x 32” full shelf

f. Plywood ware board shelves, ½” thick minimum

g. Casters

24.5 Item No. AF24: Pottery Wheel

Overall Dimensions: 20”W x 21”D x 20”H

NASCO – Z15243A101, 9719058 or equal

Shimpo – RK-Whisper European model or equal

Item image is for general illustration purposes only, and it is not an exact representation of the requirement.

Attachment #2 Page 12 of 39

a. Drive system: direct drive DC brushless motor

b. Wheel-head direction adjustment: clockwise/counter-clockwise

c. 304MM/12” Light alloy casting wheel-head drilled for bat pins

d. Centering: 5KG/100 lbs.

e. Wheel head speed: 0-250RPM

f. Speed control; fixed foot pedal with hand lever

g. Quiet, beltless operation

h. Wheel head acts as a banding wheel when the pedal is at stop

i. Pedal stops the wheel head immediately

j. Higher torque requires no belts

k. Electrical requirements: 400W, Single phase 230V 50/60HZ

l. All electric components shall be compatible with 230V/50HZ German power and manufactured with a Schuko Type F plug

m. European model required

n. Warranty: 5 year

a. Metal: Manufacturer’s standard powder coat finish selection

24.6 Item No. AF25: Slab Roller

Overall Dimensions: 76”W x 34”D x 40”H

a. Steel construction

b. Circular handle to move roller

c. Double cable system

d. Cast iron mounted ball bearings

e. Canvas covered boards

f. (3) Shims provided

a. ¼” Plain

b. ¼” Canvas

Amaco Brent – SR20 or equal

Attachment #2 Page 13 of 39

c. 1/8” Plain

24.7 Item No. AF27: Light Table

Overall Dimensions: 54”W x 42”D x 39”H

a. Powder coated steel base frame with post legs and stringer

b. Heavy duty foot rest

c. LED light table

d. 48”W x 36”D Work area

e. Self-contained light box with translucent 1/8” acrylic diffuser panel, ¼” glass and hardwood frame

f. Shatter resistant, Plexiglas face

g. Adjustable tilt (0 thru 40 degree)

h. Adjustable leg glides

i. Input voltage 90-260 VAC, 50-60HZ international voltage

j. All electric components shall be compatible with 230V/50HZ German power and manufactured with a Schuko Type F plug

a. Metal: Manufacturer’s standard powder coat selection

24.8 Item No. D12: Audio Visual Desk, Metal/Laminate

Overall Dimensions: 4’-8”W x 2’-8”D

Researched product lines:

Omnirax – Presto4-B or equal

Gagne – Porta Trace LED Light Table or equal

Attachment #2 Page 14 of 39

Contractor shall:

*Coordinate layout with existing windows, wall-mounted data boxes, etc., as applicable.

Components:

a. Broadcast video console with laminate constructed chassis shall include the following:

i. Laminate worksurface

ii. Laminate riser shelf, above worksurface

iii. Built-in keyboard tray shall slide under worksurface

iv. Rack space below riser shelf

b. Fixed shelf below worksurface

c. (4) Casters, (2) locking minimum

d. Worksurfaces and chassis shall be laminate.

a. Laminate Top and Riser: Manufacturer’s standard wood grain selection shall include maple

b. Laminate Chassis: Manufacturer’s standard selection shall include black

24.9 Item No. AF13: Hospital Bed

Overall Dimensions: 99.5cm W x 223.3cm D x 39.5 – 77.5cm H

Linet – Eleganza 2 or equal

Attachment #2 Page 15 of 39

a. Height adjustable acute care hospital bed with electric lift adjustment and controls

i. Bed frame shall be metal construction with (2) lift columns

ii. Mattress platform shall have (4) plastic sections with ventilation channels

iii. Split plastic side rails with release mechanism and integrated bed adjustment controls; rails shall run full length of mattress platform

iv. Bed adjustments shall include:

a. Bed height extension: maximum up to 31cm

b. Electronic back rest adjustment angle: maximum 64 degrees

c. Electronic thigh rest adjustment angle: maximum 32 degrees

d. Back rest adjustment: 11cm

e. Back rest stop: 30 degree angle

f. Manual calf rest adjustment angle: 15 degrees

g. Height adjustment range: 38cm

h. Reverse recline position

v. Position / angle indicator

vi. Removable plastic bed ends with lock mechanism

vii. Corner adapters for lifting poles or infusion stands

viii. Wall bumpers

ix. Universal handset holder

x. (5) Casters, (4) Locking casters with central locking

xi. Power cord shall be long enough to reach power source

a. All electric components shall be compatible with 230V/50HZ German power and manufactured with a Schuko Type F plug

b. Powered controlled components, such as tilt or height adjustment mechanism shall be CE rated and compliant with EN 60601-1

b. Accessories shall include:

a. (1) Multicare inverter with jack

b. (1) Trapezoidal handle with belt and auto-rewind

c. (1) Infusion stand equal to Linet RD 2014

d. (1) Mattress equal to ViskoMatt Comfort Prophylaxis mattress with moisture protection

a. Mattress height: 18cm

b. Plastic mattress cover; shall be designed for quick removal bedding and secured against accidental removal

c. Mattress shall conform with DBfK recommendations (German Nurses

Association)

c. Safe working load shall not exceed 250Kg (550 lbs.)

d. All surfaces shall be easy to clean and disinfect

e. Meets the standard DIN EN 60601-2-52

f. TUV Certified

Finish:

a. Plastic: Manufacturer’s standard selection

b. Metal: Manufacturer’s standard powder coat paint selection

Attachment #2 Page 16 of 39

c. Mattress: Manufacturer’s standard selection

24.10 Item No. AF17: Outdoor Bench with Back, Concave

Overall Dimensions: 66.5”W x 33”D x 33”H

* Field verify site conditions to coordinate surface mount installation.

General Requirements:

a. Concave curved bench with back composed of formed aluminum tubing

b. Leveling glides

c. Powder coated aluminum

d. Ganging kit

e. Shall connect to item AF18 and AF19, refer to plan

f. Weight: 117 lbs.

g. Surface mounts included

h. Shall be from same manufacturer as item AF18 and AF19

i. Finish shall coordinate with adjacent outdoor furnishings

a. Paint: Manufacturer’s standard powder coat selection shall include bronze metallic

24.11 Item No. AF18: Outdoor Bench with Back, Convex

Overall Dimensions: 66.5”W x 33”D x 33”H

Researched product lines:

Janus Et Cie – Rio Bench, Concave, 169, or equal Via – Sierra or equal

Researched product lines:

Janus Et Cie – Rio Bench, Convex, 169 or equal Via - Sierra or equal

Attachment #2 Page 17 of 39

General Requirements:

a. Convex curved bench with back composed of formed aluminum tubing

b. Leveling glides

c. Powder coated aluminum

d. Ganging kit

e. Shall connect to item AF18 and AF19, refer to plan

f. Surface mounts included

g. Weight 117 lbs.

h. Shall be from same manufacturer as item AF18 and AF19

i. Finish shall coordinate with adjacent outdoor furnishings

24.12 Item No. AF19: Outdoor Bench, Backless

Overall Dimensions: 54”W x 30”D x 17”H

General Requirements:

a. Rectangular bench composed of formed aluminum tubing

b. Leveling glides

Researched product lines:

Janus Et Cie – Rio Bench, 137, or equal Via – Sierra or equal

Attachment #2 Page 18 of 39

c. Powder coated aluminum

d. Ganging kit

e. Shall connect to item AF18 and AF19, refer to plan

f. Surface mounts included

g. Weight 75 lbs.

h. Shall be from same manufacturer as item AF18 and AF19

i. Finish shall coordinate with adjacent outdoor furnishings

24.13 Item No. A01: Conductor’s System

Overall Dimensions: 43”W x 38”D

a. Item shall consist of the following:

i. Double podium

ii. Sheet music stand

iii. Conductor’s chair

iv. Flex techbridge

b. Double podium shall have a base podium (43”W x 38”D x 6”H) and an upper podium (32”W x 38”D x 6”H)

i. Shall have two steps with detachable safety rail

ii. Shall have a carpeted surface with steel framework

iii. Shall have built in wheels

c. Stand shall have an angled surface with a pencil lip to hold sheet music

i. Shall have a high pressure laminate surface with metal base

ii. Shall be 27”W x 20”D and height adjustable from 30” - 48”

iii. Shall rotate and lock position; shall tilt from flat to vertical

d. Chair shall have a 4- or 5-star base with glides, a footrest, separate seat and back

i. Shall be height adjustable from 26” – 35.5”H

ii. Shall have the ability to swivel or lock into position

e. Flex techbridge shall have extruded aluminum channels with lengths from 2’ - 8’

Wenger – Flex Conductor’s System or equal

Attachment #2 Page 19 of 39

i. Cast iron footings

ii. Wheels on one end

iii. Holds up to 250lbs

iv. Shall be height adjustable from 29” – 41”

v. Velcro tie straps included for cable management

f. 5 year warranty

a. Top: Manufacturer’s standard selection shall include black

b. Metal: Manufacturer’s standard powder coat paint selection shall include black

24.14 Item No. A02: Music Stand, Student

Overall Dimensions: 20”W x 63”H

a. Polycarbonate desk with accessory shelf

b. 20-3/8” x 13-1/2” desk with 19” x2-1/2” accessory shelf

c. 18-gauge upright post

d. Brass spring height adjustment mechanism with adjusting height from 22-1/2” to 46-

1/2” (desk lip to floor)

e. Greenguard indoor air quality certified and Greenguard children and schools certified

f. 5 year warranty

a. Top: Manufacturer’s standard selection shall include black

b. Metal: Manufacturer’s standard powder coat paint selection shall include black

24.15 Item No. A03: Music Stand Cart

Overall Dimensions: 68”W x 27.5”D x 63”H

Researched product lines:

Wenger – Stand Move and Store Cart 039C202 or equal

Wenger – Bravo 1020000 or equal

Attachment #2 Page 20 of 39

*Contractor shall enter quantity of music stand carts required to accommodate A02 on Attachment 1.

General Requirements:

a. Frame shall have a uni-weld construction with components welded into an integral unit

b. Integral handle

c. Stacks (18) music stands, minimum

d. Frame shall be 16-gauge steel

e. (2) Fixed 8” wheels, (2) swivel 5” wheels

i. (1) Swivel wheel shall be in the center of cart

f. Shall coordinate with A02

a. Metal: Manufacturer’s standard powder coat paint selection

24.16 Item No. C08: Music Chair, Metal Frame, Thermoplastic/Polypropylene

a. Thermoplastic/Polypropylene, or similar material, seat and back shell with rolled edge

b. 2-Piece seat and back

c. Seat back shall have 4-5 degree recline angle

d. Provide seat heights as follows:

Wenger – Student Chair or equal

Attachment #2 Page 21 of 39

i. 17-1/2”; 80% mid-range height

ii. 18-1/2”; 10% higher height

iii. 16”; 10% lower height

iv. Contractor shall coordinate with end user after award and prior to order for the necessary seat height

e. Armless

f. Metal 4-leg frame with glides

g. Stacks (8) on the floor; (18) on cart

a. Shell: Manufacturer’s standard polypropylene selection shall include black

b. Metal Frame: Manufacturer’s standard powder coat paint selection shall include black

24.17 Item No. AF07: Chair Cart, Music Chairs

Overall Dimensions: 38.25”W x 24.5”D x 65”H

*Contractor shall enter quantity of chair carts required to accommodate C08 on Attachment 1.

General Requirements:

a. Durable steel construction

b. Stacks (18) student music chairs, minimum

c. (2) Fixed, (2) swivel 4” wheels

d. Shall coordinate with C08

24.18 Item No. AF12: Garment Rack

Overall Dimensions: 72”W x 24”D x 70.5”H

Wenger – Chair Move And Store Cart - 127A261 or equal

Attachment #2 Page 22 of 39

a. Heavy duty garment rack with top and bottom shelves

b. 14 Gauge steel bottom shelf

c. 16 Gauge steel top shelf

d. 1.5” diameter 13 gauge steel tubing upright and 1.25” diameter 11 gauge steel tubing hangar bar

e. Provide (1) Basket accessory per rack, folds flat to store

f. Provide (3) Costume dividers per rack, minimum

g. Non-marring casters, (2) swivel, (2) rigid, minimum

h. Sized to fit through a standard 32” door

i. Provide (1) dust cover accessory per rack, if available

j. Provide (1) privacy screen accessory, if available

a. Metal: Manufacturer’s standard powder coat paint selection shall include black

24.19 Item No. AF28: Guitar Rack

Overall Dimensions: 65.75”W x 29.5”D x 72”H

Wenger – Rock 'n Roll Garment Rack - 028B002 or equal

Wenger – 148J006 or equal

Attachment #2 Page 23 of 39

a. Laminate mobile storage unit with vinyl/ABS edge for (20) cased or uncased acoustic or electric guitars

b. Plywood/composite wood substrate with closed end panels

c. Adjustable height upper cross supports to fit 3/4 to full size guitars

d. Adjustable and removable yokes

e. (4) Swivel casters, 2 locking, minimum

f. Provide security cables and compatible locks for theft prevention

g. UL and Greenguard certified

h. Warranty: 5 years

a. Laminate: Manufacturer’s standard selection shall include equivalent to Wenger

Maple

b. Edge: Manufacturer’s standard selection shall coordinate with laminate finish

c. Metal: Manufacturer’s standard selection

24.20 Item No. AF29: Violin/Viola Rack

Overall Dimensions: 61”W x 33”D x 50.75”H

a. Laminate mobile storage unit with vinyl/ABS edge for (16) cased violins or violas

b. Plywood/composite wood substrate with closed end panels

c. (4) Swivel casters, 2 locking, minimum

d. Cross supports at top and bottom

e. Adjustable wood spacers

f. UL and Greenguard certified

g. Warranty: 5 year

Maple

b. Edge: Manufacturer’s standard selection shall coordinate with laminate finish

c. Metal: Manufacturer’s standard selection

Wenger – 148J005 or equal

Attachment #2 Page 24 of 39

24.21 Item No. AF30: Instrument Storage

Overall Dimensions: Width and depth vary, refer to plan layout x 85.75”H

*Confirm handedness in field.

*Field verify to coordinate site conditions after award and prior to order.

General Requirements:

a. Laminate storage cabinets with various sized compartments shall accommodate musical/band instruments

b. Composite wood substrate

c. Provide side, back and top closure panels and components necessary to provide a full complete installation. Back panels shall be fully finished

d. Toe-kick or plinth base

e. Straight grille, hinged doors with locks, except where noted, refer to plan

f. Shelf design shall allow for ventilation or airflow within storage compartments

g. Cabinet section shall be configured according to plan layout

i. Shall include the following equivalent component types:

a. (3) 1N

b. (5) 4N

c. (7) 5N

d. (1) 7N

e. (4) 8N

f. (6) 9N

g. (4) 10N

h. (4) 11N

i. (3) 12

Wenger – Ultrastor or equal

Attachment #2 Page 25 of 39

j. (1) 12, no door

k. (4) 14N

l. (1) 19

ii. Shall accommodate the following instrument types and quantities:

a. (17) Flutes

b. (4) Oboes

c. (28) B-Flat clarinets

d. (2) 2 Piece bass clarinets

e. (7) 1 Piece Bass Clarinet

f. (10) Tubas (upright bell)

g. (3) Bassoons

h. (4) 6.5” x 14” Snare drums

i. (21) Alto saxophones

j. (3) 8” x14” March snares

k. (19) Tenor saxophones

l. (16) Trombones

m. (4) Bass trombones

n. (5) Baritone horns

o. (5) Euphoniums

h. Provide wall or floor attachment per manufacturer’s recommendation

i. Exterior and interior finish shall be the same

j. Each storage compartments shall be locking, keyed random. Contractor shall coordinate with end user after award and prior to order to confirm this preference

k. UL and Greenguard certified

l. Warranty: 10 year

Oyster

c. Metal: Manufacturer’s standard selection shall include equivalent to Wenger Oyster

24.22 Item No. AF33: Sheet Music Storage

Overall Dimensions: 44”W x 32”D x 82”H Individual Shelf Dimensions: 34.5”W x 12”D x 82”H

Wenger – Music Library System 173G600 or equal

Attachment #2 Page 26 of 39

*Confirm handedness in field.

*Field verify to coordinate site conditions after award and prior to order.

General Requirements:

a. (4) Unit pull-out shelving system shall be constructed of:

i. Laminate shelving with metal reinforcement

ii. ¾” Industrial grade composite wood substrate

iii. Units shall have (5) sides with (4) adjustable and (2) fixed shelves

iv. Collection capacity: 240 lineal feet of sheet music, minimum

v. Frame shall be 16-gauge steel, minimum

vi. (1) Caster and bumpers on each unit for ease of movement

b. Complete unit shall be anchored to wall and/or floor per manufacturer’s recommendation

c. UL and Greenguard certified

d. Warranty: 10 year

Finish:

a. Laminate: Manufacturer’s standard selection shall include equivalent to Wenger

Oyster

c. Metal: Manufacturer’s standard selection shall include Wenger Oyster

24.23 Item No. AF34: Tuba / Sousaphone Storage Rack, Mobile

Overall Dimensions: 74”W x 33”D x 44”H

a. Laminate mobile storage unit with vinyl/ABS edge for tubas or sousaphones

Item image is for general illustration purposes only, and it is not an exact representation of the requirement.

Wenger – 148J007 or equal

Attachment #2 Page 27 of 39

b. Unit shall hold (3) tubas or (3) sousaphones or a combination of (3) tubas or sousaphones

c. Racks shall be capable of vertical and horizontal adjustment to hold a combination of different sized and shaped tubas and sousaphones

d. (4) Swivel casters, (2) locking, minimum

e. Top cross member shall be 14- gauge tubular steel, minimum

f. Bottom cross member supports shall have coated or padded to protect instruments

g. Adjustable padded cradles

h. Warranty: 5 years

Finish:

a. Laminate: Manufacturer’s standard selection shall include equivalent to Wenger

Maple

c. Metal: Manufacturer’s standard selection

24.24 Item No. AF35: Mobile Choral Risers

Overall Individual Dimension: 6’-6”W x 6’-0”D

a. Four step choral series

b. Folds for compact storage and easy transportation

c. 6’-6.25” wide at the back of the fourth step

d. 150 lb. live load capacity per sq. ft.

e. Step depth: 18”D

f. Riser height: 8”H

g. Integral back rail with safety crossbar

h. Attachable side rails

i. Carpeted risers

j. Built in swivel action wheels

Finish:

a. Carpet: Manufacturer’s standard selection

Wenger – 4 Step Signature Series 098G054 or equal

Attachment #2 Page 28 of 39

b. Metal: Manufacturer’s standard powder coat selection shall include black

24.25 Item No. A23: Ice Machine with Bin

Overall Dimensions: 22”W x 33-34”D x 53 – 60”H (with legs)

*Field verify plumbing and electrical requirements after award and prior to order.

*Field verify appropriate ceiling clearances after award and prior to order.

General Requirements:

a. Ice production shall be a maximum of 300 lbs. of ice cubes per 24 hour period

b. Cube Size: half dice or approximately 1” x 1” x .5”

c. Holding bin shall store 120 lbs. of ice minimum

d. Provide compatible water filter assembly

e. Air cooled

f. Push ice chute

g. Removable panel allows the bin to be easily cleaned without having to remove the ice machine

h. Unit, including powered internal parts and components, shall operate on 220-

240/50Hz grounded single phase electricity, with Schuko F-Type plug

i. Electrical components shall have CE Approval

j. All drainage lines and power cords shall be sufficient length to ensure appropriate reach to drains and wall power connections

k. Provide (1) water filter cartridge

l. Unit may be standalone stacker or all-inclusive ice maker/dispenser unit

a. Metal: Manufacturer’s standard selection shall include stainless steel

24.26 Item No. A24: Bottom Freezer Refrigerator

Manitowoc – Indigo NXT Series IT0420 with D320 Bin – 50Hz or equal Ice-O-Matic –CD40522 Ice Dispenser with ICE0325HA ice maker, IFQ1 water filter system, or equal

Attachment #2 Page 29 of 39

Overall Dimensions: 60cm W x 66cm D x 203cm H

*Field verify plumbing and electrical connections after award and prior to order.

General Requirements:

a. Total net capacity 366 liters:

i. Refrigerator capacity: 279 Liters

ii. Freezer capacity: 87 Liters

b. LED light

c. Energy Efficient Class A+++

d. Frost free

e. Open door alarm

f. Temperature control

g. Multi airflow system

h. (4) Door bins

i. (5) Safety glass shelves, (3) shelves adjustable, minimum

j. Unit, including powered internal parts and components, shall operate on 220-

240/50Hz grounded single phase electricity, with Schuko F-Type plug

k. Electrical components shall have CE Approval

Bosch – KGN39XI47 Series 4 or equal

Attachment #2 Page 30 of 39

l. All power cords shall be sufficient length to ensure appropriate reach to drains and power connections. Contractor shall confirm length after award and prior to order

a. Metal: Manufacturer’s standard selection shall include stainless steel or white and coordinate with adjacent built-in appliances. Contractor shall confirm finish after award and prior to order

24.27 Item No. A25: Top Freezer Refrigerator

Overall Dimensions: 76.20cm W x 80.51cm D x 172.72cm H

General Requirements:

a. Total net capacity 575 liters:

i. Freezer capacity: 139 Liters

b. Adjustable shelving and door bins

c. Frost free

d. (2) Crisper drawers

e. Snack drawer

f. Reversible doors

g. (2) Ice trays

h. (2) Adjustable levelers and (2) fixed rollers

i. Warranty: 7 Years

j. Unit, including powered internal parts and components, shall operate on 220-

240/50Hz grounded single phase electricity, with Schuko F-Type plug

k. Electrical components shall have CE Approval

Frigidaire – MRTG23V7RW or equal

Attachment #2 Page 31 of 39

l. All power cords shall be sufficient length to ensure appropriate reach to drains and power connections

24.28 Item No. A26: Medical Refrigerator

Overall Dimensions: 59.7cm W x 61.5cm D x 200.3cm H

General Requirements:

a. Laboratory refrigerator-freezer combination with electronic controls

b. Total net capacity: 345 liters:

i. Refrigerator capacity: 240 Liters

ii. Freezer capacity: 105 Liters

c. Frost-free

d. External digital temperature display

e. Temperature alarm

f. (5) Refrigerator storage shelves, (4) adjustable

g. (3) Freezer drawers, freezer compartment

h. Reversible door hinges

i. Self-closing door

j. Key lock

k. Ice maker, if available

l. Unit, including powered internal parts and components, shall operate on 220-

240/50Hz grounded single phase electricity, with Schuko F-Type plug

Liebherr – LCv4010 Mediline

Attachment #2 Page 32 of 39

m. Electrical components shall have CE Approval

n. All power cords shall be sufficient length to ensure appropriate reach to drains and power connections

24.29 Item No. A27: Washer

Overall Dimensions: 600mm W x 520mm D x 850mm H

General Requirements:

a. Freestanding front load washer with porthole type glass door

b. Drum capacity: 8KG minimum

c. LED or Digital display

d. Detergent and bleach dispenser compartment

e. Washing cycle control display shall include a minimum of (6) washing preset programs in addition to speed and temperature selections

f. Variable spin speed

g. Automatic load sensor

Researched product lines:

Zanussi by Electrolux – Front Load Washer - ZWF81663W Bosch – Front Load Washer - WAT28669ES

Attachment #2 Page 33 of 39

h. Out of balance detection sensor

i. (4) Adjustable feet

j. English inscription instruction

k. Non-reversible door hinge; swing shall coordinate with adjacent dryer

l. Provide all cords and hoses necessary for operation

m. Unit, including powered internal parts and components, shall operate on 220-

240/50Hz power, with Schuko F-Type plug

n. CE Approved

o. A+++ energy efficiency

p. All power cords and drain hoses shall be sufficient length to ensure appropriate reach to drains and power connections. Contractor shall confirm after award and prior to order

24.30 Item No. A28: Condensing Dryer

Overall Dimensions: 600mm W x 520mm D x 850mm H

a. Freestanding front load dryer with heat pump condenser dryer for ventless applications

b. Porthole type glass door

Researched product lines:

Zanussi by Electrolux – Front Load Washer – ZDH8333W Bosch – Condensing Dryer – WTG87239EE

Attachment #2 Page 34 of 39

c. Drum capacity: 8KG minimum

d. Condensing tank

e. Self-cleaning condenser

f. LED or Digital display

g. Drying cycle display shall include a minimum of (12) washing preset programs

h. Removable lint filter

i. (4) Adjustable feet

j. English inscription instruction

k. Provide drain hose accessory

l. Non-reversible door hinge; swing shall coordinate with adjacent washer

m. Provide all cords and hoses necessary for operation

n. Unit, including powered internal parts and components, shall operate on 220-

240/50Hz power, with Schuko F-Type plug

o. CE Approved

p. A+++ energy efficiency

q. All power cords and drain hoses shall be sufficient length to ensure appropriate reach to drains and power connections. Contractor shall confirm length after award and prior to order

24.31 Item No. S25: Drying Cabinet

Overall Dimensions: 36”W x 18”D x 84”H

Researched product lines:

Shain – 9200 or equal Brite Visual / US Markerboard - 9200

Attachment #2 Page 35 of 39

a. Steel frame construction, 13 gauge minimum

b. Full height doors with handles, angled steel pieces and expanded sheet mesh

c. Side and back panels shall be expanded sheet mesh

d. (4) Perforated hardboard shelves with fixed metal brackets

e. Fixed base shelf

24.32 Item No. S26: Damp Proof Cabinet

Overall Dimensions: 36”W x 18”D x 84”H

Researched product lines:

Shain – 9100 or equal Brite Visual / US Markerboard - 9100

a. Steel construction, 19 gauge, minimum

b. Side and back panels are double-walled; internal layer is anodized sheet aluminum

c. Foam rubber gaskets around doors

d. Hinged doors, locking

e. (4) Heavy duty, bolt on shelves

f. Shelves have aluminum surface and water retaining bats

g. Fixed base shelf

Attachment #2 Page 36 of 39

24.33 Item No. A22: Goggle Sanitizer Cabinet

Overall Dimensions: 24-28’W x 9-12”D x 26-30”H

*Field verify and coordinate with end user to determine wall mount location, if needed.

General Requirements:

a. Capacity: 35 goggles, minimum

b. UV sanitizing system with timer, exceeds 10 minutes

c. High intensity ultraviolet lamp, 25-watt, minimum

d. All electric components shall be compatible with 220V/50HZ German power and manufactured with a Schuko Type F plug

e. Rated for international use only

f. Able to kill at least 99% of all bacteria present in 8 minutes of less

g. Key lock

h. Capable of wall mounting; provide all hardware required for installation

Finish:

a. Metal: Manufacturer’s standard selection shall include white or grey baked enamel

25.0 Construction Requirements - Benching Systems - NOT USED

26.0 Construction Requirements - Console Systems – NOT USED

Carolina Biological Supply – Goggle Sanitizer Cabinet 646846A

Attachment #2 Page 37 of 39

Appendix – Finishes

Upholstery Specifications & Basis Of Design

Item Number:

C21

Attachment #2 Page 38 of 39

UPH - C21 UPHOLSTERY FABRIC

MANUFACTURER VIRCO

MODEL NUMBER;

PATTERN / COLOR

LINEN GRAY VINYL

TECHNICAL SPECIFICATIONS

WIDTH: N/A

REPEAT: N/A

FINISH:

N/A

CONTENT: N/A

ABRASION:

N/A

CLEANING

CODE:

N/A

ADDITIONAL SPECIFICATIONS (IF NEEDED)

MANUFACTURER'S STANDARD VINYL EQUIVALENT

Attachment #2 Page 39 of 39