Am0001.pdf
PDF 15 KB Posted
- Attached to
- Ft. Peck Draft Tube Bulkheads Federal contract opportunity
- Solicitation number
- W9128F-16-R-0033
About this file
Amendment 0001
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Am0003Dwgs.pdf | ||
| Am0003.pdf | ||
| Am0002.pdf | ||
| Am0001_Dwgs.pdf | ||
| Draft_Tube_Specs.pdf | ||
| Ft._Peck_Draft_Tube_Bulkhead_Drawings_16-R-0033.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Am #0001 - 1
DEPARTMENT OF THE ARMY
Omaha District, Corps of Engineers 1616 Capitol Avenue Omaha, Nebraska 68102-4901
:NOTICE: Failure to acknowledge : Solicitation No. W9128F 16 R 0033 :all amendments may cause rejec- :
:tion of the offer. See FAR : Date of Issue: 10 August 2016 :52.215-1 of Section 00 21 00 : New Date of Receiving Proposals:
23 September 2016
Amendment No. 0001 02 September 2016
SUBJECT: Amendment No. 0001 to Request for Proposal Solicitation Package, construction of Draft Tube Bulkhead, Fort Peck Dam, MT.
Solicitation No. W9128F 16 R 0033.
TO: Prospective Offerors and Others Concerned
1. The specifications and drawings for subject project are hereby modified as follows (revise all specification indices, attachment lists, and drawing indices accordingly).
a. Specifications. (Descriptive Changes.)
(1) Section 00 10 00 -1, delete date and time of receiving proposals shown and substitute "23 September 2016" at "2:00".
(2) Section 05 59 13.01 26 Page 20, after paragraph 2.3.5.1 add the following new paragraph (renumber subsequent paragraphs accordingly):
"2.3.5.2 Bumper Spring and Seal Retainer Bar Fasteners"
Provide countersunk ASTM F593 SS304 fasteners with matching ASTM F594 nut and washers as indicated on the contract drawing. Provide isolation washers and sleeves as specified. Provide anaerobic thread-locking compound.”
(3) Section 41 01 20.72 26 Page 6, correct paragraph 1.5 to read as follows:
“1.5 QUALITY ASSURANCE
All drawings and calculations shall be stamped by a Registered Professional Mechanical Engineer; submit qualifications for the engineer(s) who will be stamping these submittals. A Registered Professional Civil Engineer with career emphasis in structural design will be accepted if the submitted qualifications indicate they are a structural engineer with knowledge in the design of lifting beams.”
b. Drawings (New/Reissued). The following new/reissued reference drawings are hereby part of the request for proposal drawings and are issued with this amendment.
Am #0001 - 2
G-002 5577.5-C-240.2 5577.5-C-242.3 5577.5-C-243.2 5577.5-C-244.2 5577.5-D-270.2 5577.5-D-271.4 5577.5-D-272.3 5577.5-D-273.4 5577.5-D-275.3 5577.5-D-276.3 5577.5-D-277.3 5577.5-D-278.3 5577.5-E-100.2 5577.5-E-101.2 5577.5-E-102.2 5577.5-E-103.2 5577.5-E-104.1
2. This amendment is a part of the proposing papers and its receipt shall be acknowledged on the Standard Form 1442. All other conditions and requirements of the request for proposal remain unchanged. If the proposals have been mailed prior to receiving this amendment, you will notify the office where proposals are received, in the specified manner, immediately of its receipt and of any changes in your proposal occasioned thereby.
a. Hand-Carried Proposals shall be delivered to the U.S. Army Corps of Engineers, Omaha District, Contracting Division, 1616 Capitol Avenue, Omaha, Nebraska 68102-4901.
b. Mailed Proposals shall be addressed as noted in Item 8 on Page 00 10 00-1 of Standard Form 1442.
3. Offers will be received until 2:00 p.m., local time at place of receiving proposals, 23 September 2016.
Attachments: Dwgs. listed in 1.b. above
U.S. Army Corps of Engineers, Omaha District 1616 Capitol Avenue Omaha, Nebraska 68102-4901
02 Sep 2016
MFS/2184
File details come from the government source that posted it. Updated .