Amendment 04.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE 4. REQUISITION/PURCHASE 5. PROJECT NO. (If applicable)

W9127821R0010-0004 27 JAN 2021 MBF20002

6. ISSUED BY CODE 7. ADMINISTERED BY(If other than item 6)

CODE

U.S. ARMY ENGINEER DISTRICT, MOBILE

CONTRACTING DIVISION (CESAM-CT)

109 SAINT JOSEPH STREET

MOBILE, AL 36628-0001

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP code) 9A. AMENDMENT OF SOLICITATION

NO.

W9127821R0010

9B. DATED (SEE ITEM 11)

2 DECEMBER 2020

10A. MODIFICATION OF

CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b)

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

The subject solicitation for: MODULAR FIRING RANGE, COLUMBUS AIR FORCE BASE, MISSISSIPPI

Is modified in the following: REFER TO THE ENCLOSED REVISIONS FOR AMENDMENT NO. 0004

NOTE: THE RECEIPT OF PROPOSAL DATE IS HEREBY REVISED BY THIS AMENDMENT. REFER TO BLOCK 13A OF THE ENCLOSED SF1442.

Except as provided herein, all terms and conditions of the document reference in item 9A or 10A, as Heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICE (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

BY

(Signature of contracting officer)

16C. DATE SIGNED

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)

PREVIOUS EDITION UNUSABLE Prescribed by GSA

MODULAR FIRING RANGE W9127821R0010

COLUMBUS AIR FORCE BASE, MISSISSIPPI MBF20002

SF 30 Page 2 Amendment No. W9127821R0010-0004

PART I - REVISIONS MADE BY ADDED AND/OR REPLACEMENT PARAGRAPHS/PAGES/SECTIONS

The items listed below are to be replaced by the corresponding added and/or revised paragraphs/pages or sections. Added and/or revised paragraphs/pages or sections are indicated by a note in bottom right hand corner of each paragraph or page. Added sections are hereby made a part of the contract and are to be inserted in the specification in the proper numerical/alphabetical sequence.

Within the specifications, deletions from the specifications are indicated by strikethrough, e.g.: deletions are marked with strikethrough and additions to the specifications including revisions/substitutions are indicated in bold, italic and underlined, e.g.: additions are indicated thus.

Corresponding Added or Revised Paragraph SECTION Page, and/or Section

SF1442 Revised Block 13A as indicated herein.

Explanation of Bid Items Revised as indicated herein.

13 34 23.13 Revised Paragraphs 1.1, 1.1.1, 1.5.2.1, 1.8, and

2.2.2.1.3.16 as indicated herein.

PART II - NOTE: Revised, replacement and added drawings are listed below. These revised, replacement and added drawings are to be inserted into the folio in the proper numerical sequence. Drawings that have been revised or replaced by this amendment shall be deleted from the folio. All drawings listed below are revised unless indicated otherwise.

SHT

REF. TITLE OF DRAWINGS

COVER SHEET

C-111 UTILITY PLAN

C-502 CIVIL DETAILS 2

E-501 ELECTRICAL RISER DIAGRAM AND SCHEDULES

Encl as stated Replaced pages of the specifications as indicated in Part I.

4 Revised drawings as indicated in Part II.

SOLICITATION, OFFER

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

W9127821R0010

2. TYPE OF

SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED

02 December 2020

PAGES OF PAGES

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO. 5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

MBF20002

7. ISSUED BY CODE CT

U.S. ARMY ENGINEER DISTRICT, MOBILE

CONTRACTING DIVISION (CESAM-CT)

109 SAINT JOSEPH STREET

MOBILE, AL 36628-0001

8. ADDRESS OFFER TO

SAME AS BLOCK 7

9. FOR INFORMATION

Email

A. NAME

Tariq Malveaux - Contract Specialist Kenneth Harlan - Contracting Officer

B. EMAIL ADDRESS

Tariq.J.Malveaux@usace.army.mil Kenneth.P.Harlan@usace.army.mil

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date):

MODULAR FIRING RANGE, COLUMBUS AIR FORCE BASE, MISSISSIPPI

* See Section 01 00 00, Paragraph “COMMENCEMENT, PROSECUTION AND COMPLETION OF WORK”.

**Block 13A. : Refer to Section 00 11 00 for the number of copies to submit with the original offer.

award, notice to proceed. 11. The Contractor shall begin performance within _10__ calendar days and complete it within __*__ calendar days after receiving This performance period is mandatory, negotiable. (See _ __ .)

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

YES NO

12B. CALENDAR DAYS

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and ___**___ copies to perform the work required are due at the place specified in Item 8 by _1400_ (hour) local time 29 JANUARY 3 FEBRUARY 2021 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, is not required.

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than __120__ calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442(REV. 4-85)

Prescribed by GSA FAR(48 CFR) 53.236-1(e)

Revised by Amendment No. W9127821R0010-0004

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NO. (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within _________ calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation - give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

20B. SIGNATURE 20C. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (contractor is required to sign this document and return _______ copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work, requisitions identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award,

(b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED

TO SIGN (Type or print)

31A. NAME OF CONTRACTING OFFICER (Type or print)

30B. SIGNATURE 30C. DATE 31B. UNITED STATES OF AMERICA

BY

31C. AWARD

DATE

STANDARD FORM 1442 BACK (REV. 4-85)

Revised by Amendment No. W9127821R0010-0004

Explanation of Bid Items page - 1 Revised by Amendment No. W9127821R0010-0004

EXPLANATION OF BID ITEMS

GENERAL:

This section comprises an explanation of the bid items identified in the Bidding Schedule. This section is a general scope of work for the bid items described in the Bidding Schedule and is not intended to be all encompassing in the description. All work specified herein shall be accomplished in accordance with the procedures prescribed in the technical provisions of the specifications and the plans/details as shown on the contract drawings. The contractor shall bid each type of work under the applicable bid item. Measurement for payment will not be made. Payment described for the various bid items will be full compensation for all labor, materials, and equipment required to complete the work.

Compensation for any item of work described in the contract but not listed in the bid schedule shall be included in the payment for the item of work to which it is made subsidiary.

The Government will consider any modular range facility that meets the requirements of specification Section 13 34 23.13 and UFC 4-179-02 5 March 2020 as modified by amendments and listed deviations. Deviations listed in Section 13 34 23.13; paragraph 1.1 are acceptable but not required.

BASE BID

Bid Item No. 1: Construct Modular Firing Range Facility and Site Improvements

Payment under Bid Item No. 1 “Construction of Modular Firing Range Facility and Site Improvements” will constitute full compensation for furnishing all materials, plant, tools, labor, and associated incidentals necessary to complete the construction of the new modular range building, including all attachments and appurtenances; concrete footings; site demolition and preparation; site grading and drainage, including retention pond and culverts; temporary and permanent erosion control; gravel paving and landscaping; site utilities and lighting, including light pole relocation; concrete sidewalks; and parking lot expansion.

END OF SECTION

SECTION 13 34 23.13

Amendment No. W9127821R0010-0004

SECTION 13 34 23.11

1.1 SUMMARY

Modular containerized, fully-functional, fully-contained, pre-engineered, indoor small arms modular firing range. Modular containerized firing range work shall include engineering, preparation of fabrication drawings and calculations for the entire modular containerized firing range system and components as specified, and required by project conditions to provide complete system.

Modular Range shall be a pre-engineered, and prefabricated set of components constructed away from the building site. Modular components are delivered to a site and then assembled on site as a complete fully operational multi-lane, live fire shooting environment. Exterior wall and roof systems and exterior components such as door canopies, stairs, etc., are to be attached as integral systems and components to the modular pre-engineered and prefabricated components. Freestanding or self-supporting roof or walls systems are not allowed.

The system shall include:

1. The Modular Range shall be a containerized product that is moveable, expandable in length with additional modules.

2. Modular range shall have roof mounted HVAC system.

3. Modules shall have roof structure and final roofing as part of each individual module. All roof components to be integral with the range modules. Final modular field connections and final roof system work such as membrane seaming are acceptable. No additional roof structures or roof coverings will be acceptable.”

4. Modular Range shall have exterior pre-finished metal wall panels over the entire exterior to cove required exterior envelope energy requirement upgrades.

5. Modular Range shall have fully-operational seven (7) lane range.

6. The modular range to be manufactured using ISO certified containers that are DOT approved transportable. Modifications to containers required for the modular range are not required to maintain the ISO certification. The Government will allow non-ISO certified containers such as purpose-built or fabricated modules that meet all requirements of this Section and UFC 4-179-02 5 March 2020.

7. Provide roof access stair at location shown on the design intent drawings for required routine maintenance of all roof mounted equipment.

8. Provide perimeter roof edge fall protection.

9. Provide premanufactured canopy over facility doors at location shown on the design intent drawings.

SECTION 13 34 23.13

Amendment No. W9127821R0010-0004

10. Provide premanufactured gutters and downspouts with splash blocks.

11. The modular range will “not” be considered a relocatable range.

Included in the 126' length shall be 10'0" x 10'0" for the Control Booth, 16'0" Get Ready area behind firing line, 25 meter shooting distance when assembled to support live fire with weapons up to (and including) 7.62mm munitions (including 12 gauge shotguns), 12' max for bullet trap, 6'0" behind bullet traps for maintenance access, one storage rooms 14'8" x 10'0" max, one storage room at 8'3" x 10'0". One vestibule 6'1" x 10'0". The combined range shall consist of prefabricated components connected together by a proven technique resulting in a 100% ballistic envelope in the entire range for use at a zero Surface Danger Zone (SDZ) site, per UFC 4-179-02, Small Arms Range.

Deviations from UFC 4-179-02, Small Arms Ranges: The following items are changed for this project:

A. Ceiling Height, including target rail height.

B. Control Booth - Raised Floor is not required.

C. Control Booth - Acoustic Window height to be 3'-0" D. Vertical Trap Throat E. Get Ready Area - A single 3'-0" x 7'-0" door is allowed.

1.1.1 Technical Requirements

A. If awarded, it is the Contractor's responsibility to further develop the design and to provide a complete and useable facility.

B. The requirements are intended to complement one another and should not be viewed as independent requirements that exclude or contradict the design as a whole. In the event of a conflict the requirements of UFC 4-179-02 5 March 2020 take precedence, unless modified by approved deviations listed in Section 13 34 23.13, paragraph 1.1.

C. The technical requirements are the minimum standards for quality of construction and materials.

D. All other requirements of UFC 4-179-02, Small Arms Ranges are required to be met.

1.5.2.1 Contractor's Qualifications

The Contractor shall have a minimum of Seven (7) years of specific experience in the design, development, production, and delivery of modular, expandable and reconfigurable transportable Modular Ranges and have supplied at least 5 modular ranges within the past 10 years to show a proven track record of performance and on schedule delivery.

The Contractor shall be a licensed modular manufacturer.

Contractor must provide documentation that independent third-party rough-in and final inspections of the various components and systems occurred prior to the enclosure of all wall, floor and roof areas that will become physically, or visually inaccessible once final construction is installed.

SECTION 13 34 23.13

Amendment No. W9127821R0010-0004

Documentation must show compliance with all local and national codes and project specification Section 13 34 23.13 and UFC 4-179-02 5 March 2020 requirements unless modified by approved deviations or amendments.

The Modular Range shall reflect the color characteristics of the facilities, which surround the initial site and will be approved by the COR.

1.8 WARRANTIES

Provide manufacturer's standard warranty stating that the modular range facility and components including bullet trap and target retrieval system and shall be free from defects in material and workmanship under normal use for a period of one (1) year from date of shipment to purchaser ("warranty period"). Warranty to be extendable by four - one (1) year increments for a total warranty period of five (5) years.

2.2.2.1.3.16 Target Retrieval System

Target Retrieval System

A ceiling mounted monorail-type target retrieval system shall be provided to facilitate target placement on each firing lane.

The system shall consist of a drive motor; the target car, shall ride along a suspended monorail, and be capable of movement from the shooting stall all the way down range and shall have the capability to be programmed to stop at various distances.

Target carriers should be able to handle various target frames and target heights.

A master control will be installed in the CB, which controls the target retrieval for all lanes and individual controls shall be installed at each firing position.

Target Retrieval System to meet all requirements of UFC 4-179-02 Small Arm Ranges and Section 4-13.

Refer to UFC 4-179-02 Small Arm Ranges and Section 4-13 and provide the following optional features:

Dimmable light illuminating target on target carrier or ceiling mounted dimmable lighting at each target location, 1m, 7m, 15m, 25m.

Self-driving target carriers with internal motors and drive system.

(NOTE: The remainder of the section is unchanged by the amendment.)