Excavator_Specifications.pdf
PDF 124 KB Posted
- Attached to
- Hydraulic Tracked Excavator Federal contract opportunity
- Solicitation number
- W911S2-18-U-2010-01
- Issued by
- Department of the Army
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Updated_Specifications.pdf | ||
| Updated_Specifications.pdf | ||
| PWA_415_Trade-in_Info.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUIREMENT:
The minimum specifications for the Hydraulic Excavator are listed below. BRAND
NAME OR EQUAL ITEMS WILL BE ACCEPTED. This requirement will also
Include the trade in of one PWA-415 JCB 175 Rubber tired excavator with ser# JCBJW17CK91505459. Please include in your response whether you will accept, and offer credit for the trade-ins.
SPECIFICATIONS:
Hydraulic Excavator Specifications:
Brand new Caterpillar 325F L CR Hydraulic Tracked Excavator or equal.
The following specifications at a minimum:
1. 160 HORSEPOWER TURBO DIESEL TEIR 4 ENGINE MINIMUM
2. OPERATING WEIGHT 57,000 POUNDS MINIMUM
3. MINIMUM 27,000 POUND LIFT CAPACITY WITHOUT BUCKET ATTACHED
4. COMPACT RADIUS DESIGN FOR MINIMUM TAIL AND FRONT SWING RADIUS
FOR TIGHT QUARTER WORK
5. ROPS PROTECTED OPERATORS CAB WITH A MINMUM 69 DECIBLES SOUND
PROTECTION
6. AUTOMATIC 2 SPEED TRAVEL MODES WITH A 3 MILES PER HOUR MAXIMUM
TRAVEL SPEED
7. MINIMUM 32 FOOT OVERALL REACH
8. MINIMUM 22 FOOT DIG DEPTH
9. 31 INCH MINIMUM TRACK WIDITH WITH STREET PADS
10. 85 GALLON FUEL TANK MINIMUM
11. ENGINE BLOCK HEATER 120 VOLT AC
12. HYDRAULIC OIL HEATER 120 VOLT AC
13. LOCKABLE BATTERY POWER DISCONNECT SWITCH
14. HYDRAULIC CONTROL SWITCH PATTERNS FROM ISO TO BACKHOE MODES
15. 24 VOLT ELECTRICAL SYSTEM
16. HEAVY DUTY HVAC SYSTEM TO INCLUDE AUTOMATIC CLIMATE CONTOL
17. DELUXE HIGH BACK AIR RIDE OPERATORS SEAT WITH HEAT AND HEAD REST
18. CRUISE CONTROL
19. TOOLBOX
20. CUP HOLDER
21. FRONT AND REAR WINDSHIELD WIPERS WITH WASHERS
22. 24 VOLT DC CONVERTOR TO 12 VOLT DC
23. AM/FM RADIO
24. REAR CAMERA SYSTEM
25. INTERIOUR AND EXTERIOUR REARVIEW MIRRORS
26. FRONT, REAR AND BOOM MOUNTED HALOGEN WORK LIGHTS
27. BEACON
28. FRONT SUN VISOR
29. UNDER CARRIAGE BOTTOM PLATES AND TRACK GUARDS
30. GROUND LEVEL GREASE POINTS
31. REACH BOOM AND STICK DESIGN
33. IN CAB HYDRAULIC ATTACHMENT CHANGING SYSTEM
34. STICK MOUNTED HYDRAULIC QUICK DISCONNECTS FOR
ATTACMENTS
35. HYDRAULIC THUMB
36. 36 INCH SEVERE DUTY DIRT DIGGING BUCKET WITH FIELD
REPLACABLE TEETH WITH QUICK COUPLER PINS
37. 48 INCH SEVERE DUTY DIRT DIGGING BUCKET WITH FIELD
REPLACEABLE TEETH WITH QUICK COUPLER PINS
38. 60 INCH HYDRAULIC TILTABLE DITCHING BUCKET WITH BOLT ON
CUTTING EDGE WITH QUICK COUPLER PINS
AND HYDRAULIC QUICK DISCONNECTS
39. 3 YEAR 3000 HOUR FULL COVERAGE EQUIPMENT WARRANTY
40. 3 COPIES OF ALL OPERATORS, SERVICE AND PARTS MANUALS
*A site visit to inspect the trade in excavator has been scheduled for May 15th, 2018 at 10:00 am eastern standard time in order to allow the Contractors to determine the trade in value of the excavator. Once a contract has been awarded a final inspection of the excavator will be scheduled to verify their condition. Please make contact via email to Ruth.torres4.civ@mail.mil if you are planning to attend the site visit and we will then send you the location. Please let us know no later than Monday 14th at 1pm.
**The contractor is responsible for coordinating the concurrent pick-up of the trade in Excavator with the delivery of the new Excavator.
***WHEN PROVIDING A PRICE FOR THE EXCAVTOR PLEASE PROVIDE
THE COST OF EXCAVATOR MINUS THE TRADE IN VALUE. PLEASE
INCLUDE THE VALUE FOR THE TRADE‐IN IN THE CLIN DESCRIPTION ON
FEDBID.
mailto:Ruth.torres4.civ@mail.mil
File details come from the government source that posted it.