Amendment 0002.pdf

ACC-ANAD

ELLEN R. BETHEA

7 FRANKFORD AVE

ANNISTON AL 36201-4199

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

See page 2.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Jul-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W911KF21Q0041

X 9B. DATED (SEE ITEM 11)

30-Jun-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Jul-2021

CODE

ACC-ANAD

ANNISTON ARMY DEPOT

7 FRANKFORD AVENUE, BLDG 35

ANNISTON AL 36201-4199

W911KF 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W911KF

FACILITY CODECODE

EMAIL:TEL:

W911KF21Q0041

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

AMENDMENT NOTES

1. The purpose of this amendment is to update the Statement of Work (SOW).

2. The Statement of Work (SOW) has been revised as noted below.

a. 3.7.1 Construction: The CNC grinder, equipment and accessories shall be constructed of quality material to the maximum extent possible and meet the following technical overall data;

Swing Diameter: minimum 30 inches Minimum External Grinding Diameter: 20 inches Minimum Internal Grinding Diameter: 1.8 inch Minimum Work piece Height: 17 inches with APC, 20 inches w/o.

Minimum Grinding Length: 20 inches I.D Spindle minimum 15 Horsepower (HP), O.D. Spindle minimum 7 Horsepower (HP) Work Spindle minimum 9.0 Horsepower (HP) ATC Tool Holder and Tool Changer minimum 6 tools.

Automatic Pallet System Single Point Wheel Dresser System Renishaw or equivalent automatic measuring system (shall include 2 inch, 6 inch, and 10 inch probes stylus) Work spindle/C axis with indexable 360,000 degree positions, full NC table Contractor shall supply a 3 jaw self-centering chuck with a 3 inch through-hole that will work with the ANAD production parts. Chuck to be T-slot table compatible chuck or compatible magnetic chuck that would be appropriately sized for ANAD production parts. Part drawings available on request.

b. 4.3 Work-holding: Contractor shall provide and install a T-slot type compatible 3 jaw self-centering chuck or magnetic chuck that would be appropriately sized for ANAD production parts and associated components for use with part drawings supplied. Chuck supplied shall include any necessary preparation on the machine tool for interfacing along with all mounting/fixturing components. Chuck shall include design with 3.00 inch through hole. Chuck shall include hard jaws and soft jaws to complete the grinding of parts required for ANAD production on new CNC grinder machine. A clamping kit for the required chuck and/or fixturing shall be included.

3. Attachment 1 Statement of Work has been updated to reflect these changes.

4. All other terms and conditions remain unchanged.

W911KF21Q0041