specs_brush_trucks_revised2_18_Aug_17.pdf

Three Fire Trucks (revised2) 18 Aug 17

2017 or newer 1 1/4 ton diesel 4x4 truck with off road package Crew Cab bench seat front and back black in color Vinyl floor Red in color 6.6l turbo V8 engine (6.4 and higher) 6-speed automatic transmission HD suspension package AM/FM stereo 40 gallon fuel tank Dual alternators 150 amps and 220 amps Exhaust brake Shielded exhaust AC and heat Hi visibility mirrors Cruise Control HD Tran cooler Front and rear tow hooks Underbody shield Back up alarm Mud flaps Manufacture warranty LED lamps mounted 2 on front bumper, 2 on rear of vehicle and 2 on each side of truck.

4 - 19 in rims with super single tires appropriate for required load Suspension upgrade/ lift kit as needed for tire clearance 2 jump seats mounted rear of cab set up with 15 feet of 1" forestry hose and nozzles at each seat, jump seats will be 20” wide, behind truck cab facing outwards on each side of vehicle”.

All nozzles will be compatible with foam

Tank 300 gallon polypropylene Fill tower with removable screen Sump with anti-swirl plate and drain fitting Vent and overflow pipe Liquid level sight gauge The tank shall have a lifetime warranty.

Foam system

10 to 20 gallon foam tank. Tank will be integral part of the water tank.

The Foam system injection point shall be positioned on the discharge plumbing such that all outlets are foam solution capable.

Pump

The pump/engine shall be capable of meeting the NFPA 1906 Performance rating of 50 GPM @ 150 PSI. Typical pump performance from 5 foot draft at sea level shall be: 70 GPM @ 150 PSI, 150 GPM @ 100 PSI and 240 GPM @ 25 PSI. Powered by 18 hp electric start motor with its own 20 gallon fuel tank and auxiliary fuel pump and filter. Low oil pressure automatic shutoff and have a drain valve with a nipple to accept 3/8 ID to allow draining of the engine oil. The pump shall be located at the rear of the apparatus mounted on aluminum skid

Emergency lighting Required 58in light bar (red) shall be mounted on the headache rack with switch inside cab 100 watt siren with a switch inside cab

Plumbing All valves will be stainless steel All plumbing will be heavy duty welded stainless steel.

Set up with foam injection system

Heavy duty electric rewind booster reel with 100' of 1" booster hose and nozzle

Top mounted pump controls

Body The fire body shall be constructed of entirely of heavy duty extruded aluminum and will have a ten (10) year structural warranty The fire body shall be 108" long, 96" wide.

There shall be headache rack constructed of 2.0" x 2.0" thick wall aluminum tubing at the front of the body that will also serve as a light bar mounting platform.

A 108”D x 30"W x 5"H tool compartment at rear of the apparatus with a horizontally hinged, drop down door shall be provided. This compartment shall provide for underbody storage of department supplied shovels, brooms, rakes, etc.

There shall be two (2) sweep-out style compartments with two (2) lift up doors located one (1) on each side of the fire body. Dimensions for the passenger side compartment shall be 56"W x 30"H x 20"D with no aluminum divider between. Dimensions for the driver side compartment shall be 60"W x 30"H x 20"D with no aluminum divider between. The compartments shall have adjustable shelves. Each compartment shall have LED compartment lights that shall automatically come on when the compartment door is opened.

ELECTRICAL

The entire wiring system shall be entirely composed of high grade commercial quality wiring harnesses that shall be color coded and function coded throughout.

An electrical sub panel shall be located behind the passenger seat.

There shall be a “MASTER BATTERY” power switch located in the cab.

The electrical system shall have a five (5) year warranty.

All applicable maintenance manuals and repair parts manuals

3 extra set of all filters