VA69D-17-B-1727-00001004.pdf

PDF 14 KB Posted

Attached to
Replace Roofing B452 676-18-112 PO#676-C80067 Federal contract opportunity
Solicitation number
VA69D17B1727
Issued by
Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 12

About this file

From the source

VA69D-17-B-1727 00001 ATT004 Salient Characteristics TPO Roofing.pdf

View the file

Other files for this federal contract opportunity

Other files attached to Replace Roofing B452 676-18-112 PO#676-C80067, newest first.
File Type Posted
36C25218C0043-001.pdf PDF
36C25218C0043-000.docx DOCX document
VA69D-17-B-1727-00004000.docx DOCX document
VA69D-17-B-1727-00003001.pdf PDF
VA69D-17-B-1727-00003000.docx DOCX document
VA69D-17-B-1727-00002000.docx DOCX document
VA69D-17-B-1727-00001002.pdf PDF
VA69D-17-B-1727-00001000.docx DOCX document
VA69D-17-B-1727-00001001.pdf PDF
VA69D-17-B-1727-00001003.pdf PDF
VA69D-17-B-1727-000.docx DOCX document
Show all 11

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SALIENT CHARACTERISTICS

TPO Roofing Material

676-18-112 Replace Roofing B-452

If bidding an equal, offeror must meet the following salient characteristics of the Thermoplastic Polyolefin (TPO) 60 mil Roofing System and must meet these minimum typical performance measures:

A. Typical Performance Measures:

Property Test Method Units Typical Values

1. Overall Thickness D 412 in. .060

2. Tearing Strength D 751 psi 120 lbf

3. Ozone Resistance

(No Cracks) D1149 --- Pass

4. Puncture Resistance FTM 101C lbf 300

5. Static Puncture

Resistance D5602 --- Pass

6. Dynamic Puncture

Resistance D 5635 --- Pass (40J)

7. Brittleness Point D 2137 Deg. F -40

8. Solar Reflectance Initial ASTM E903 .80

9. Thermal Emittance Initial ASTM E408 .95

10. Solar Reflective

Index Initial ASTM E1980 102

B. Must also meet the following requirements:

1. Must meet or exceed the minimum requirements set forth by ASTM D 6878.

2. Finished roof will be white surface and meet Leadership in Energy and Environmental

Design (LEED) requirements.

3. Must comply with ANSI/ASHRAE/IES Standard 90.1 Energy Standard for Buildings

File details come from the government source that posted it.