TARGET SYSTEM SOW FEB 2020.docx

STATEMENT OF WORK

PURCHASE / INSTALLATION OF NEW TARGET SYSTEM

911 Airlift Wing Pittsburgh IAP ARS

February 2020

Attachment 1

FA8903-04-D-8719

TABLE OF CONTENTS

Section/Paragraph Page

STATEMENT OF WORK

In carrying out work under this contract, the contractor shall furnish the personnel, services, equipment, tools, materials, vehicles, facilities supervision and other requirements necessary for, or incidental to, the performance of work set forth herein; assure any and all program and/or project related costing information (regardless of its stage in development) is secured, as directed by the Contracting Officer (CO); and be responsible for safeguarding proprietary, classified, and other sensitive information. The contractor shall be immediately capable of addressing and interpreting all aspects of environmental law and regulation.

Scope The contractor shall furnish all tools, equipment, labor, and material necessary to install a new located at the 911 Airlift Wing (AW) Pittsburgh International Airport Air Reserve Station (PIA ARS) Small Arms Firing Range. The objective of this contract is to remove the pre-existing target system and replace it with a new state of the art target system at the 911th Airlift Wing Firing Range. This new system should avoid system and training failures.

The 911 AW Firing Range is located in Independence Township, approximately 2.5 miles northwest of Clinton, PA; the mailing address is 790 BOCKTOWN CORK RD CLINTON PA 15026-1146. The Firing Range is a remote, unmanned, secure facility. The firing range is an outdoor facility, approximately 2 acres, consisting of a training/administrative building, a small arms range, and surrounding areas. The range is a 25-meter small arms range consisting of 22 covered firing points and a bullet trap dust collection system.

1.2 Site Access

Site visits to the 911 AW Firing Range can be arranged through the Base POC. Interested contractors are encouraged and expected to attend a site visit to confirm existing conditions prior to bidding.

The firing range is normally closed on a daily basis; operating hours are as scheduled, typically Monday through Friday from 0730-1530, excluding Federal holidays. Access to the range at all times must be scheduled and coordinated through 911 AW Combat Arms personnel at (412) 474-8077.

The contractor shall coordinate all site work with Combat Arms to ensure there are no conflicts with range training activities and that Combat Arms personnel are available during site work. Contractor personnel working on the site without Combat Arms personnel present shall assume all responsibility for theft, loss, or vandalism of range facilities and equipment.

0. Target System Removal / Installation

0. Removal / Installation Disassemble and dispose of currently installed SRET/Automated Target System. Install a new state of the art target system. The new target system must meet the minimum requirements: Rated for exterior use, 22 firing points @ 25 meters each, (1) master control panel to control all lanes, (22) individual control panels, remote operations access, rifle rated turning targets that can be individually controlled, LED lights on drive unit to provide lighting at shooting stations, acceleration feature to speed target movement; weather proof all exposed electrical wiring, warranty, initial operators training and technical / software support.

Post Award Meeting/Teleconference After the issuance of this contract, the contractor shall attend a post award meeting/teleconference at the location specified by the CO. The purpose of the meeting shall be to become familiar with the work requirements, information, and/or site-specific data addressed under this contract.

1.5 Government-Furnished Property and Services

No Government furnished property or services shall be provided in this requirement.

Government Points of Contact

911 AW Contracting Officer:

Ms. Phyllis Delgros Contracting Officer

PHONE: 330-609-1046

phyllis.delgros@us.af.mil

911 AW Combat Arms POC:

MSgt Kenneth Craft Combat Arms Manager

911 SFS/S4C

PHONE: (412) 474-8077; DSN: 277-8077

kenneth.craft.1@us.af.mil