Tank_Drawing.pdf
PDF 135 KB Posted
- Attached to
- Caustic Tank Replacement State and local contract opportunity
- Solicitation number
- 26-P-00249
- Issued by
- Hillsborough County, Florida
About this file
This is a technical drawing document for a Snyder Industries tank model ET3 (ASM TK 8500VCT X 120) prepared for the City of Tampa Wastewater Department's caustic tank replacement procurement under solicitation number 26-P-00249. The procurement involves the supply and installation of a single 8,500-gallon vertical natural HDPE tank measuring 120 inches by 194 inches with a 1.9 specific gravity rating designed for 50% caustic applications. The tank must be delivered and installed at 2700 Maritime Boulevard, Tampa, Florida 33605, with delivery restricted to Monday through Friday between 7 a.m. and 3 p.m. Quote submissions were due April 17, 2026, and must remain valid for a minimum of 60 days from submission.
Pricing must be submitted on an FOB Destination basis with separate line item costs for the tank and installation labor, inclusive of all freight, handling, and shipping charges. The technical specifications include an 18-inch PE threaded/vented manway, two 4-inch and two 3-inch S.U.M.O. fittings, a 12-inch by 24-inch fitting, ladder lugs at 0 and 180 degrees, and eight tiedown/lifting lugs. All dimensions are in inches and subject to a 3% tolerance on rotational molded parts. All external piping must be independently supported, and only base fittings are to remain installed at shipment per Snyder Industries procedure. Vendors must consult Snyder's Guidelines for Use and Installation prior to delivery, available at http://www.snyderindustriestanks.com/Technical. The City identified two Small Local Business Enterprise (SLBE) certified vendors: Brian Carrier & Associates, Inc., based in Land O Lakes, Florida, and RZ Service Group LLC, headquartered in Tampa. All bidders must be licensed to do business in Florida, demonstrate E-Verify compliance, maintain proof of insurance, and comply with the City's non-discrimination, ethics, indemnification, and public records requirements. The City reserves the right to award by division, line item, or aggregate total.
View the file
Other files for this state and local contract opportunity
| File | Type | Posted |
|---|---|---|
| Caustic_Tank_Replacement.pdf | ||
| Caustic_Tank_Replacement.pdf | ||
| Directory_2026-04-07_(1)_Only_2_SLBE_vendors.xls | XLS spreadsheet | |
| Directory_2026-04-07_(1)_Only_2_SLBE_vendors.xls | XLS spreadsheet | |
| Tank_Drawing.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
*ALL EXTERNAL PIPING MUST BE INDEPENDENTLY SUPPORTED.
*ONLY BASE FITTINGS TO BE LEFT INSTALLED AT TIME OF SHIPMENT PER SII PROCEDURE.
*Consult Snyder's Guidelines for Use and Installation prior to delivery.
Available on-line at http://www.snyderindustriestanks.com/Technical
1.06 TYP.
120.0
179.6
94.0
FLANGE
LINE
9.0
62.0
FLANGE
LINE
8.3
192.5 194.2
18" PE THREADED/VENTED
MAWAY w/ 15" ACCESS
2-4" S.U.M.O.
FITTING LOCATION
(10" X 10") @ 0°
2-3" S.U.M.O.
FITTING LOCATION
(6.5" X 6.5") @ 90°
12" X 24" FITTING
FLAT @ 270°
LADDER LUGS
@ 0° AND 180°
15.0
15.0
14.4
15.7
1.5 TYP.
26.0
2.0 TYP.
6.5" X 6.5"
S.U.M.O. FLAT
0°
45°135°
180°
225°
270°
315°
10" X 10"
S.U.M.O. FLAT
12" X 24" FITTING
FLAT @ 270°
TIEDOWN/LIFTING
LUG 8 PLCS. 90° TYP.
90°
PART NO.
ET3
DRAWN BYDO NOT SCALE TITLE:
ENG. ID.
REVISION
ASM TK 8500VCT X 120
SHEET
© SNYDER INDUSTRIES, INC., 2019
ALL DIMENSIONS, DESIGNS, AND INFORMATION ON THIS PRINT MUST BE
CONSIDERED PROPRIETARY TO SNYDER INDUSTRIES, INC. AND MAY NOT
BE USED, COPIED, OR DISTRIBUTED WITHOUT WRITTEN PERMISSION OF AN
OFFICER (OR HIS AGENT) OF THE FIRM.
STATUS: Released
D0010477400000N
ALL DIMENSIONS ARE IN INCHES, NOMINAL, & SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ON ROTATIONAL MOLDED PARTS ARE SUBJECT TO A 3% TOLERANCE.
(402) 467-5221 www.snydernet.com
B http://www.snyderindustriestanks.com/Technical/Guidelines-for-Use-Installation
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
File details come from the government source that posted it. Updated .