SynchroResolver_SSN_SOW.docx

Draft Statement of Work

1. INTRODUCTION

The Naval Air Systems Command (NAVAIR) Metrology and Calibration Program has a requirement to procure Synchro Resolvers (S/R) Standards compatible with IEEE-488 GPIB.

2. BACKGROUND

The Synchro Resolvers S/R in the NAVAIR inventory are used to calibrate Digital Angle Indicators and various test sets. An S/R compatible with IEEE-488 GPIB can be programmed to run automated Instrument Calibration Procedures (ICPs) reducing the time it takes to calibrate a test instrument (TI).

3. SCOPE

The scope of this effort is to procure up to 135 S/R in accordance with Calibration Standards Specifications (CSS) FY18-PAX-0002 and associated installation and training.

4. APPLICABLE DOCUMENTS

N/A

5. REQUIREMENTS

5.1 Material Requirements

The Offeror shall provide up to 135 S/R in accordance with the CSS FY18-PAX-0002.

5.2 Installation

5.2.1 The manufacturer shall provide a complete installation of the initial system at NAVAIR Patuxent River as identified in Section F.

5.3 Training Requirements

5.3.1 The contractor shall provide a one (1) day training course with installation for up to ten (10) persons at NAVAIR Patuxent River as identified in Section F.

5.3.2 Training Course Syllabus (CDRL A006) A Training Syllabus for a one (1) day training shall be provided to the Government in accordance with CDRL A006.

5.4 Logistic Requirements

5.4.1 Operator/Service Manual (CDRL T001). A Technical manual for the operation and/or service of the system shall be provided in accordance with CDRL T001.

5.4.2 Calibration Certification and/or Certificate of Conformance Reporting (CDRL A001). A calibration certification with calibration data or certificate of conformance shall be provided with each part number in accordance with CDRL A001.

5.4.3 Instrument Calibration Procedure (CDRL A002). The Original Equipment Manufacturer’s (OEM) ICP shall be provided for calibrating the Synchro Resolvers in accordance with CDRL A002.

5.4.4 Software/Firmware Version Description (CDRL A003). The contractor shall provide the US Government the release and/or version number of each item of firmware and software included in the calibration standard in accordance with CDRL A003.

5.4.5 Software/Firmware Change Request (CDRL A004). When an item of firmware or software needs to be changed a Software/Firmware Change Request shall be submitted to the US Government in accordance with CDRL A004.

5.4.6 Proposed Spare Parts list (CDRL A005). A repairable parts list shall be provided to the Government for each standard installed IAW CDRL A005.

5.4.7 Warranty. The manufacturer shall provide the minimum commercial warranty for the system of at least one (1) calendar year from date of shipment.

5.4.8 Warranty Sticker. Each current system shall have a sticker affixed to the outside of the unit enclosure.

6. GOVERNMENT FURNISHED PROPERTY

N/A

7. DELIVERABLES

Rev 3/24/22