Statement of Work- Vertical Carousel v2 - final.pdf

Statement of Work (SOW) For

821 CRSS/DOS

Vertical Carousel

The 821st Contingency Response Support Squadron Aerospace Ground Equipment/Power Production shop has a requirement for one vertical carousel.

Description: The Contractor shall provide all supervision, labor, materials and equipment to purchase and install 1 each Vertical Carousels to support this requirement. The contractor shall install the Carousel system at the 821st CRSS. The end user is responsible for providing electrical power to the unit. The customer is responsible for final electrical hookup connections from the unit motor to the electrical disconnect.

Specifications/Salient Characteristics:

• Contractor shall adhere to all Travis AFB and all federal OSHA standards.

• Carousel must be fully enclosed and store shelves or drawers vertically

• Vertical carousel must be able to select specific tray number

• Vertical carousel shall come equipped with a method to operate equipment without power

• Vertical carousel must have a safety device installed to immediately stop equipment in the situation that any foreign object enters the access door during tray movement

• Unit will be no taller than 12ft 0.1 in

• Unit will be no wider than 12ft

• Unit will be no deeper than 7ft

• Unit must have minimum 400 sq. ft. of storage

• Vertical carousel shelves shall have two tiers (removable if necessary), one with open storage and the others with removable storage boxes.

• Each shelf shall have a 1-2 foot height requirement

• Must offer a minimum 5 year warranty

• Vertical carousel must be equipped with emergency stop button

• Vertical carousel must have ability to be pin protected to prevent access from unauthorized personnel

• The electrical disconnect box will have a blade switch

Special Requirements:

• Contractor will provide a certified electrician to run power from the power panel to the vertical carousel including the disconnect box

• Contractor must secure vertical carousel to ground preventing equipment from tipping

• Contractor must function test equipment after installation to ensure proper operation

• Contractor must provide 1 hour in person initial training for up to 15 personnel on vertical carousel operation at completion of install

Qualifications/Certifications:

• Contractor will provide a certified electrician to install power for carousel operation